ON_BrepTrim Class Reference

#include <opennurbs_brep.h>

Inheritance diagram for ON_BrepTrim:

Public Types
enum	TYPE {   unknown = 0 , boundary = 1 , mated = 2 , seam = 3 ,   singular = 4 , crvonsrf = 5 , ptonsrf = 6 , slit = 7 ,   trim_type_count = 8 , force_32_bit_trim_type = 0xFFFFFFFF }

Public Member Functions
bool	AttachToEdge (int edge_index, bool bRev3d)
ON_Brep *	Brep () const
bool	ChangeTrimCurve (int c2i)
ON_COMPONENT_INDEX	ComponentIndex () const
void	DestroyRuntimeCache (bool bDelete=true)
void	Dump (ON_TextLog &) const
ON_BrepEdge *	Edge () const
int	EdgeCurveIndexOf () const
const ON_Curve *	EdgeCurveOf () const
ON_BrepFace *	Face () const
int	FaceIndexOf () const
bool	IsSeam () const
bool	IsSlit () const
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
ON_BrepLoop *	Loop () const
bool	m__legacy_flags_Get (int *, int *) const
void	m__legacy_flags_Set (int, int)
	ON_BrepTrim ()
	ON_BrepTrim (int)
ON_BrepTrim &	operator= (const ON_BrepTrim &)
ON_BOOL32	Read (ON_BinaryArchive &)
bool	RemoveFromEdge (bool bRemoveFromStartVertex, bool bRemoveFromEndVertex)
ON_BOOL32	Reverse ()
ON_BOOL32	SetEndPoint (ON_3dPoint end_point)
ON_BOOL32	SetStartPoint (ON_3dPoint start_point)
unsigned int	SizeOf () const
int	SurfaceIndexOf () const
const ON_Surface *	SurfaceOf () const
bool	TransformTrim (const ON_Xform &xform)
int	TrimCurveIndexOf () const
const ON_Curve *	TrimCurveOf () const
ON_BrepVertex *	Vertex (int tvi) const
ON_BOOL32	Write (ON_BinaryArchive &) const
Public Member Functions inherited from ON_CurveProxy
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
int	Degree () const
void	DestroyRuntimeCache (bool bDelete=true)
int	Dimension () const
ON_Interval	Domain () const
void	Dump (ON_TextLog &) const
ON_Curve *	DuplicateCurve () const
ON_BOOL32	Evaluate (double, int, int, double *, int=0, int *=0) const
ON_BOOL32	GetBBox (double *, double *, ON_BOOL32=false) const
bool	GetClosestPoint (const ON_3dPoint &, double *, double=0.0, const ON_Interval *=NULL) const
ON_BOOL32	GetCurveParameterFromNurbFormParameter (double, double *) const
ON_BOOL32	GetLength (double *, double=1.0e-8, const ON_Interval *=NULL) const
ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double *, const ON_Interval *=NULL) const
bool	GetNextDiscontinuity (ON::continuity c, double t0, double t1, double *t, int *hint=NULL, int *dtype=NULL, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const
virtual ON_BOOL32	GetNormalizedArcLengthPoint (double s, double *t, double fractional_tolerance=1.0e-8, const ON_Interval *sub_domain=NULL) const
virtual ON_BOOL32	GetNormalizedArcLengthPoints (int count, const double *s, double *t, double absolute_tolerance=0.0, double fractional_tolerance=1.0e-8, const ON_Interval *sub_domain=NULL) const
int	GetNurbForm (ON_NurbsCurve &, double=0.0, const ON_Interval *=NULL) const
ON_BOOL32	GetNurbFormParameterFromCurveParameter (double, double *) const
ON_BOOL32	GetParameterTolerance (double, double *, double *) const
ON_BOOL32	GetSpanVector (double *) const
int	HasNurbForm () const
ON_BOOL32	IsArc (const ON_Plane *=NULL, ON_Arc *=NULL, double=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsClosed (void) const
bool	IsContinuous (ON::continuity c, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const
ON_BOOL32	IsInPlane (const ON_Plane &, double=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsLinear (double=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsPeriodic (void) const
ON_BOOL32	IsPlanar (ON_Plane *=NULL, double=ON_ZERO_TOLERANCE) const
int	IsPolyline (ON_SimpleArray< ON_3dPoint > *pline_points=NULL, ON_SimpleArray< double > *pline_t=NULL) const
bool	IsShort (double tolerance, const ON_Interval *sub_domain=NULL) const
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
	ON_CurveProxy ()
	ON_CurveProxy (const ON_Curve *)
	ON_CurveProxy (const ON_Curve *, ON_Interval)
	ON_CurveProxy (const ON_CurveProxy &)
ON_CurveProxy &	operator= (const ON_CurveProxy &)
const ON_Curve *	ProxyCurve () const
ON_Interval	ProxyCurveDomain () const
bool	ProxyCurveIsReversed () const
ON_BOOL32	Read (ON_BinaryArchive &)
double	RealCurveParameter (double t) const
ON_BOOL32	Reverse ()
ON_BOOL32	SetDomain (double t0, double t1)
bool	SetDomain (ON_Interval domain)
void	SetProxyCurve (const ON_Curve *real_curve)
void	SetProxyCurve (const ON_Curve *real_curve, ON_Interval real_curve_subdomain)
bool	SetProxyCurveDomain (ON_Interval proxy_curve_subdomain)
unsigned int	SizeOf () const
int	SpanCount () const
ON_BOOL32	Split (double t, ON_Curve *&left_side, ON_Curve *&right_side) const
double	ThisCurveParameter (double real_curve_parameter) const
ON_BOOL32	Transform (const ON_Xform &)
ON_BOOL32	Trim (const ON_Interval &domain)
ON_BOOL32	Write (ON_BinaryArchive &) const
virtual	~ON_CurveProxy ()
Public Member Functions inherited from ON_Curve
bool	AreaMassProperties (ON_3dPoint base_point, ON_3dVector plane_normal, ON_MassProperties &mp, bool bArea=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const
virtual ON_BOOL32	ChangeClosedCurveSeam (double t)
virtual bool	ChangeDimension (int desired_dimension)
virtual ON_CurveTree *	CreateCurveTree () const
ON_3dVector	CurvatureAt (double t) const
const ON_CurveTree *	CurveTree () const
ON_3dVector	DerivativeAt (double t) const
void	DestroyCurveTree ()
ON_BOOL32	Ev1Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, int side=0, int *hint=0) const
ON_BOOL32	Ev2Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, ON_3dVector &second_derivative, int side=0, int *hint=0) const
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
ON_BOOL32	EvCurvature (double t, ON_3dPoint &point, ON_3dVector &tangent, ON_3dVector &kappa, int side=0, int *hint=0) const
ON_BOOL32	EvPoint (double t, ON_3dPoint &point, int side=0, int *hint=0) const
ON_BOOL32	EvTangent (double t, ON_3dPoint &point, ON_3dVector &tangent, int side=0, int *hint=0) const
virtual bool	Extend (const ON_Interval &domain)
ON_BOOL32	FrameAt (double t, ON_Plane &plane) const
ON_BOOL32	GetDomain (double *t0, double *t1) const
virtual ON_BOOL32	GetSpanVectorIndex (double t, int side, int *span_vector_index, ON_Interval *span_domain) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
int	IntersectCurve (const ON_Curve *curveB, ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, const ON_Interval *curveA_domain=0, const ON_Interval *curveB_domain=0) const
virtual int	IntersectSelf (ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, const ON_Interval *curve_domain=0) const
int	IntersectSurface (const ON_Surface *surfaceB, ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, const ON_Interval *curveA_domain=0, const ON_Interval *surfaceB_udomain=0, const ON_Interval *surfaceB_vdomain=0) const
bool	IsClosable (double tolerance, double min_abs_size=0.0, double min_rel_size=10.0) const
virtual bool	IsEllipse (const ON_Plane *plane=NULL, ON_Ellipse *ellipse=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsShort (double tolerance, const ON_Interval *sub_domain=NULL) const
bool	LengthMassProperties (ON_MassProperties &mp, bool bLength=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const
class ON_PolylineCurve *	MeshCurve (ON_MeshCurveParameters &mp, ON_PolylineCurve *polyline, bool bSkipFirstPoint, const ON_Interval *domain)
class ON_PolylineCurve *	MeshCurve (ON_MeshCurveParameters &mp, ON_PolylineCurve *polyline, bool bSkipFirstPoint, const ON_Interval *domain) const
ON_NurbsCurve *	NurbsCurve (ON_NurbsCurve *pNurbsCurve=NULL, double tolerance=0.0, const ON_Interval *subdomain=NULL) const
ON::object_type	ObjectType () const
	ON_Curve ()
	ON_Curve (const ON_Curve &)
ON_Curve &	operator= (const ON_Curve &)
ON_3dPoint	PointAt (double t) const
ON_3dPoint	PointAtEnd () const
ON_3dPoint	PointAtStart () const
bool	RemoveShortSegments (double tolerance, bool bRemoveShortSegments=true)
bool	SetDomain (ON_Interval domain)
ON_3dVector	TangentAt (double t) const
virtual	~ON_Curve ()
Public Member Functions inherited from ON_Geometry
ON_BoundingBox	BoundingBox () const
virtual ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
virtual void	ClearBoundingBox ()
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
virtual ON_BOOL32	HasBrepForm () const
virtual bool	IsDeformable () const
virtual bool	IsMorphable () const
virtual bool	MakeDeformable ()
virtual bool	Morph (const ON_SpaceMorph &morph)
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Scale (double scale_factor)
virtual ON_BOOL32	SwapCoordinates (int i, int j)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
virtual	~ON_Geometry ()
Public Member Functions inherited from ON_Object
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
bool	CopyFrom (const ON_Object *src)
void	CopyUserData (const ON_Object &source_object)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	FirstUserData () const
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual void	MemoryRelocate ()
virtual ON_UUID	ModelObjectId () const
void	MoveUserData (ON_Object &source_object)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
void	PurgeUserData ()
bool	SetUserString (const wchar_t *key, const wchar_t *string_value)
void	TransformUserData (const ON_Xform &xform)
virtual	~ON_Object ()

Public Attributes
double	m__legacy_2d_tol
double	m__legacy_3d_tol
int	m__legacy_flags
bool	m_bRev3d
int	m_c2i
int	m_ei
ON_Surface::ISO	m_iso
int	m_li
ON_BoundingBox	m_pbox
ON_SimpleArray< ON_BrepTrimPoint >	m_pline
double	m_tolerance [2]
int	m_trim_index
ON_U	m_trim_user
TYPE	m_type
int	m_vi [2]
Public Attributes inherited from ON_Object
ON_MEMORY_POOL *	m_mempool

Private Member Functions
	ON_BrepTrim (const ON_BrepTrim &)
	ON_OBJECT_DECLARE (ON_BrepTrim)

Private Attributes
ON_Brep *	m_brep

Friends
class	ON_Brep

Additional Inherited Members
Protected Member Functions inherited from ON_Curve
ON_CurveTree *	CurveTreeHelper ()
bool	ParameterSearch (double t, int &index, bool bEnableSnap, const ON_SimpleArray< double > &m_t, double RelTol=ON_SQRT_EPSILON) const
Protected Attributes inherited from ON_Curve
ON_CurveTree *	m_ctree

Member Enumeration Documentation

TYPE

enum ON_BrepTrim::TYPE

Enumerator
unknown
boundary
mated
seam
singular
crvonsrf
ptonsrf
slit
trim_type_count
force_32_bit_trim_type

Constructor & Destructor Documentation

ON_BrepTrim() [1/3]

ON_BrepTrim::ON_BrepTrim

(

)

ON_BrepTrim() [2/3]

ON_BrepTrim::ON_BrepTrim

(

int

trim_index

)

ON_BrepTrim() [3/3]

ON_BrepTrim::ON_BrepTrim ( const ON_BrepTrim & )

private

Member Function Documentation

AttachToEdge()

bool ON_BrepTrim::AttachToEdge	(	int	edge_index,
		bool	bRev3d )

Brep()

ON_Brep * ON_BrepTrim::Brep

(

)

const

ChangeTrimCurve()

bool ON_BrepTrim::ChangeTrimCurve

(

int

c2i

)

ComponentIndex()

ON_COMPONENT_INDEX ON_BrepTrim::ComponentIndex ( ) const

virtual

Reimplemented from ON_Geometry.

DestroyRuntimeCache()

void ON_BrepTrim::DestroyRuntimeCache ( bool bDelete = true )

virtual

Reimplemented from ON_Object.

Dump()

void ON_BrepTrim::Dump ( ON_TextLog & dump ) const

virtual

Reimplemented from ON_Object.

Edge()

ON_BrepEdge * ON_BrepTrim::Edge

(

)

const

EdgeCurveIndexOf()

int ON_BrepTrim::EdgeCurveIndexOf

(

)

const

EdgeCurveOf()

const ON_Curve * ON_BrepTrim::EdgeCurveOf

(

)

const

Face()

ON_BrepFace * ON_BrepTrim::Face

(

)

const

FaceIndexOf()

int ON_BrepTrim::FaceIndexOf

(

)

const

IsSeam()

bool ON_BrepTrim::IsSeam

(

)

const

IsSlit()

bool ON_BrepTrim::IsSlit

(

)

const

IsValid()

ON_BOOL32 ON_BrepTrim::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

Loop()

ON_BrepLoop * ON_BrepTrim::Loop

(

)

const

m__legacy_flags_Get()

bool ON_BrepTrim::m__legacy_flags_Get	(	int *	gcon,
		int *	mono ) const

m__legacy_flags_Set()

void ON_BrepTrim::m__legacy_flags_Set	(	int	gcon,
		int	mono )

ON_OBJECT_DECLARE()

ON_BrepTrim::ON_OBJECT_DECLARE ( ON_BrepTrim )

private

operator=()

ON_BrepTrim & ON_BrepTrim::operator=

(

const ON_BrepTrim &

src

)

Read()

ON_BOOL32 ON_BrepTrim::Read ( ON_BinaryArchive & file )

virtual

Reimplemented from ON_Object.

RemoveFromEdge()

bool ON_BrepTrim::RemoveFromEdge	(	bool	bRemoveFromStartVertex,
		bool	bRemoveFromEndVertex )

Reverse()

ON_BOOL32 ON_BrepTrim::Reverse ( )

virtual

Implements ON_Curve.

SetEndPoint()

ON_BOOL32 ON_BrepTrim::SetEndPoint ( ON_3dPoint end_point )

virtual

Reimplemented from ON_Curve.

SetStartPoint()

ON_BOOL32 ON_BrepTrim::SetStartPoint ( ON_3dPoint start_point )

virtual

Reimplemented from ON_Curve.

SizeOf()

unsigned int ON_BrepTrim::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

SurfaceIndexOf()

int ON_BrepTrim::SurfaceIndexOf

(

)

const

SurfaceOf()

const ON_Surface * ON_BrepTrim::SurfaceOf

(

)

const

TransformTrim()

bool ON_BrepTrim::TransformTrim

(

const ON_Xform &

xform

)

TrimCurveIndexOf()

int ON_BrepTrim::TrimCurveIndexOf

(

)

const

TrimCurveOf()

const ON_Curve * ON_BrepTrim::TrimCurveOf

(

)

const

Vertex()

ON_BrepVertex * ON_BrepTrim::Vertex

(

int

tvi

)

const

Write()

ON_BOOL32 ON_BrepTrim::Write ( ON_BinaryArchive & file ) const

virtual

Reimplemented from ON_Object.

Friends And Related Symbol Documentation

ON_Brep

friend class ON_Brep

friend

Member Data Documentation

m__legacy_2d_tol

double ON_BrepTrim::m__legacy_2d_tol

m__legacy_3d_tol

double ON_BrepTrim::m__legacy_3d_tol

m__legacy_flags

int ON_BrepTrim::m__legacy_flags

m_brep

ON_Brep* ON_BrepTrim::m_brep

private

m_bRev3d

bool ON_BrepTrim::m_bRev3d

m_c2i

int ON_BrepTrim::m_c2i

m_ei

int ON_BrepTrim::m_ei

m_iso

ON_Surface::ISO ON_BrepTrim::m_iso

m_li

int ON_BrepTrim::m_li

m_pbox

ON_BoundingBox ON_BrepTrim::m_pbox

m_pline

ON_SimpleArray<ON_BrepTrimPoint> ON_BrepTrim::m_pline

m_tolerance

double ON_BrepTrim::m_tolerance[2]

m_trim_index

int ON_BrepTrim::m_trim_index

m_trim_user

ON_U ON_BrepTrim::m_trim_user

m_type

TYPE ON_BrepTrim::m_type

m_vi

int ON_BrepTrim::m_vi[2]

---

The documentation for this class was generated from the following files:

• src/3rdparty/legacy/opennurbs/opennurbs_brep.h
• src/3rdparty/legacy/opennurbs/opennurbs_brep.cpp
• src/3rdparty/legacy/opennurbs/opennurbs_brep_io.cpp
• src/3rdparty/legacy/opennurbs/opennurbs_brep_tools.cpp