#include <opennurbs_brep.h>

Inheritance diagram for ON_BrepEdge:

Public Member Functions
ON_Brep *	Brep () const

bool	ChangeEdgeCurve (int c3i)

ON_COMPONENT_INDEX	ComponentIndex () const

ON__UINT32	DataCRC (ON__UINT32 current_remainder) const

void	Dump (ON_TextLog &) const

int	EdgeCurveIndexOf () const

const ON_Curve *	EdgeCurveOf () const

ON_BOOL32	IsClosed () const

bool	IsSmoothManifoldEdge (double angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE) const

ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const

ON::object_type	ObjectType () const

	ON_BrepEdge ()

	ON_BrepEdge (int)

ON_BrepEdge &	operator= (const ON_BrepEdge &)

ON_BOOL32	Read (ON_BinaryArchive &)

ON_BOOL32	Reverse ()

ON_BOOL32	SetEndPoint (ON_3dPoint end_point)

ON_BOOL32	SetStartPoint (ON_3dPoint start_point)

unsigned int	SizeOf () const

ON_BrepTrim *	Trim (int eti) const

int	TrimCount () const

ON_BrepVertex *	Vertex (int evi) const

ON_BOOL32	Write (ON_BinaryArchive &) const

Public Member Functions inherited from ON_CurveProxy
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const

int	Degree () const

void	DestroyRuntimeCache (bool bDelete=true)

int	Dimension () const

ON_Interval	Domain () const

void	Dump (ON_TextLog &) const

ON_Curve *	DuplicateCurve () const

ON_BOOL32	Evaluate (double, int, int, double , int=0, int =0) const

ON_BOOL32	GetBBox (double , double , ON_BOOL32=false) const

bool	GetClosestPoint (const ON_3dPoint &, double , double=0.0, const ON_Interval =NULL) const

ON_BOOL32	GetCurveParameterFromNurbFormParameter (double, double *) const

ON_BOOL32	GetLength (double , double=1.0e-8, const ON_Interval =NULL) const

ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double , const ON_Interval =NULL) const

bool	GetNextDiscontinuity (ON::continuity c, double t0, double t1, double t, int hint=NULL, int *dtype=NULL, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const

virtual ON_BOOL32	GetNormalizedArcLengthPoint (double s, double t, double fractional_tolerance=1.0e-8, const ON_Interval sub_domain=NULL) const

virtual ON_BOOL32	GetNormalizedArcLengthPoints (int count, const double s, double t, double absolute_tolerance=0.0, double fractional_tolerance=1.0e-8, const ON_Interval *sub_domain=NULL) const

int	GetNurbForm (ON_NurbsCurve &, double=0.0, const ON_Interval *=NULL) const

ON_BOOL32	GetNurbFormParameterFromCurveParameter (double, double *) const

ON_BOOL32	GetParameterTolerance (double, double , double ) const

ON_BOOL32	GetSpanVector (double *) const

int	HasNurbForm () const

ON_BOOL32	IsArc (const ON_Plane =NULL, ON_Arc =NULL, double=ON_ZERO_TOLERANCE) const

ON_BOOL32	IsClosed (void) const

bool	IsContinuous (ON::continuity c, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const

ON_BOOL32	IsInPlane (const ON_Plane &, double=ON_ZERO_TOLERANCE) const

ON_BOOL32	IsLinear (double=ON_ZERO_TOLERANCE) const

ON_BOOL32	IsPeriodic (void) const

ON_BOOL32	IsPlanar (ON_Plane *=NULL, double=ON_ZERO_TOLERANCE) const

int	IsPolyline (ON_SimpleArray< ON_3dPoint > pline_points=NULL, ON_SimpleArray< double > pline_t=NULL) const

bool	IsShort (double tolerance, const ON_Interval *sub_domain=NULL) const

ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const

	ON_CurveProxy ()

	ON_CurveProxy (const ON_Curve *)

	ON_CurveProxy (const ON_Curve *, ON_Interval)

	ON_CurveProxy (const ON_CurveProxy &)

ON_CurveProxy &	operator= (const ON_CurveProxy &)

const ON_Curve *	ProxyCurve () const

ON_Interval	ProxyCurveDomain () const

bool	ProxyCurveIsReversed () const

ON_BOOL32	Read (ON_BinaryArchive &)

double	RealCurveParameter (double t) const

ON_BOOL32	Reverse ()

ON_BOOL32	SetDomain (double t0, double t1)

bool	SetDomain (ON_Interval domain)

void	SetProxyCurve (const ON_Curve *real_curve)

void	SetProxyCurve (const ON_Curve *real_curve, ON_Interval real_curve_subdomain)

bool	SetProxyCurveDomain (ON_Interval proxy_curve_subdomain)

unsigned int	SizeOf () const

int	SpanCount () const

ON_BOOL32	Split (double t, ON_Curve &left_side, ON_Curve &right_side) const

double	ThisCurveParameter (double real_curve_parameter) const

ON_BOOL32	Transform (const ON_Xform &)

ON_BOOL32	Trim (const ON_Interval &domain)

ON_BOOL32	Write (ON_BinaryArchive &) const

virtual	~ON_CurveProxy ()

Public Member Functions inherited from ON_Curve
bool	AreaMassProperties (ON_3dPoint base_point, ON_3dVector plane_normal, ON_MassProperties &mp, bool bArea=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const

virtual ON_BOOL32	ChangeClosedCurveSeam (double t)

virtual bool	ChangeDimension (int desired_dimension)

virtual ON_CurveTree *	CreateCurveTree () const

ON_3dVector	CurvatureAt (double t) const

const ON_CurveTree *	CurveTree () const

ON_3dVector	DerivativeAt (double t) const

void	DestroyCurveTree ()

ON_BOOL32	Ev1Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, int side=0, int *hint=0) const

ON_BOOL32	Ev2Der (double t, ON_3dPoint &point, ON_3dVector &first_derivative, ON_3dVector &second_derivative, int side=0, int *hint=0) const

bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const

ON_BOOL32	EvCurvature (double t, ON_3dPoint &point, ON_3dVector &tangent, ON_3dVector &kappa, int side=0, int *hint=0) const

ON_BOOL32	EvPoint (double t, ON_3dPoint &point, int side=0, int *hint=0) const

ON_BOOL32	EvTangent (double t, ON_3dPoint &point, ON_3dVector &tangent, int side=0, int *hint=0) const

virtual bool	Extend (const ON_Interval &domain)

ON_BOOL32	FrameAt (double t, ON_Plane &plane) const

ON_BOOL32	GetDomain (double t0, double t1) const

virtual ON_BOOL32	GetSpanVectorIndex (double t, int side, int span_vector_index, ON_Interval span_domain) const

bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const

int	IntersectCurve (const ON_Curve curveB, ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, const ON_Interval curveA_domain=0, const ON_Interval *curveB_domain=0) const

virtual int	IntersectSelf (ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, const ON_Interval *curve_domain=0) const

int	IntersectSurface (const ON_Surface surfaceB, ON_SimpleArray< ON_X_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, const ON_Interval curveA_domain=0, const ON_Interval surfaceB_udomain=0, const ON_Interval surfaceB_vdomain=0) const

bool	IsClosable (double tolerance, double min_abs_size=0.0, double min_rel_size=10.0) const

virtual bool	IsEllipse (const ON_Plane plane=NULL, ON_Ellipse ellipse=NULL, double tolerance=ON_ZERO_TOLERANCE) const

bool	IsShort (double tolerance, const ON_Interval *sub_domain=NULL) const

bool	LengthMassProperties (ON_MassProperties &mp, bool bLength=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const

class ON_PolylineCurve *	MeshCurve (ON_MeshCurveParameters &mp, ON_PolylineCurve polyline, bool bSkipFirstPoint, const ON_Interval domain)

class ON_PolylineCurve *	MeshCurve (ON_MeshCurveParameters &mp, ON_PolylineCurve polyline, bool bSkipFirstPoint, const ON_Interval domain) const

ON_NurbsCurve *	NurbsCurve (ON_NurbsCurve pNurbsCurve=NULL, double tolerance=0.0, const ON_Interval subdomain=NULL) const

ON::object_type	ObjectType () const

	ON_Curve ()

	ON_Curve (const ON_Curve &)

ON_Curve &	operator= (const ON_Curve &)

ON_3dPoint	PointAt (double t) const

ON_3dPoint	PointAtEnd () const

ON_3dPoint	PointAtStart () const

bool	RemoveShortSegments (double tolerance, bool bRemoveShortSegments=true)

bool	SetDomain (ON_Interval domain)

ON_3dVector	TangentAt (double t) const

virtual	~ON_Curve ()

Public Member Functions inherited from ON_Geometry
ON_BoundingBox	BoundingBox () const

virtual ON_Brep *	BrepForm (ON_Brep *brep=NULL) const

virtual void	ClearBoundingBox ()

ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const

ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const

virtual ON_BOOL32	HasBrepForm () const

virtual bool	IsDeformable () const

virtual bool	IsMorphable () const

virtual bool	MakeDeformable ()

virtual bool	Morph (const ON_SpaceMorph &morph)

	ON_Geometry ()

	ON_Geometry (const ON_Geometry &)

ON_Geometry &	operator= (const ON_Geometry &)

ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)

ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)

ON_BOOL32	Scale (double scale_factor)

virtual ON_BOOL32	SwapCoordinates (int i, int j)

ON_BOOL32	Translate (const ON_3dVector &translation_vector)

virtual	~ON_Geometry ()

Public Member Functions inherited from ON_Object
ON_BOOL32	AttachUserData (ON_UserData *pUserData)

bool	CopyFrom (const ON_Object *src)

void	CopyUserData (const ON_Object &source_object)

ON_BOOL32	DetachUserData (ON_UserData *pUserData)

ON_UserData *	FirstUserData () const

ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const

bool	GetUserString (const wchar_t *key, ON_wString &string_value) const

int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const

int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const

ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const

virtual void	MemoryRelocate ()

virtual ON_UUID	ModelObjectId () const

void	MoveUserData (ON_Object &source_object)

	ON_Object ()

	ON_Object (const ON_Object &)

ON_Object &	operator= (const ON_Object &)

void	PurgeUserData ()

bool	SetUserString (const wchar_t key, const wchar_t string_value)

void	TransformUserData (const ON_Xform &xform)

virtual	~ON_Object ()

Public Attributes
int	m_c3i

int	m_edge_index

ON_U	m_edge_user

ON_SimpleArray< int >	m_ti

double	m_tolerance

int	m_vi [2]

Public Attributes inherited from ON_Object
ON_MEMORY_POOL *	m_mempool

Private Member Functions
	ON_BrepEdge (const ON_BrepEdge &)

	ON_OBJECT_DECLARE (ON_BrepEdge)

Private Attributes
ON_Brep *	m_brep

Friends
class	ON_Brep

Additional Inherited Members
Protected Member Functions inherited from ON_Curve
ON_CurveTree *	CurveTreeHelper ()

bool	ParameterSearch (double t, int &index, bool bEnableSnap, const ON_SimpleArray< double > &m_t, double RelTol=ON_SQRT_EPSILON) const

Protected Attributes inherited from ON_Curve
ON_CurveTree *	m_ctree

Constructor & Destructor Documentation

◆ ON_BrepEdge() [1/3]

ON_BrepEdge::ON_BrepEdge ( )

◆ ON_BrepEdge() [2/3]

ON_BrepEdge::ON_BrepEdge ( int edge_index )

◆ ON_BrepEdge() [3/3]

ON_BrepEdge::ON_BrepEdge ( const ON_BrepEdge & )

private

Member Function Documentation

◆ Brep()

ON_Brep * ON_BrepEdge::Brep ( ) const

◆ ChangeEdgeCurve()

bool ON_BrepEdge::ChangeEdgeCurve ( int c3i )

◆ ComponentIndex()

ON_COMPONENT_INDEX ON_BrepEdge::ComponentIndex ( ) const

virtual

Reimplemented from ON_Geometry.

◆ DataCRC()

ON__UINT32 ON_BrepEdge::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Dump()

void ON_BrepEdge::Dump ( ON_TextLog & dump ) const

virtual

Reimplemented from ON_Object.

◆ EdgeCurveIndexOf()

int ON_BrepEdge::EdgeCurveIndexOf ( ) const

◆ EdgeCurveOf()

const ON_Curve * ON_BrepEdge::EdgeCurveOf ( ) const

◆ IsClosed()

ON_BOOL32 ON_BrepEdge::IsClosed ( void ) const

virtual

Reimplemented from ON_Curve.

◆ IsSmoothManifoldEdge()

bool ON_BrepEdge::IsSmoothManifoldEdge ( double angle_tolerance = ON_DEFAULT_ANGLE_TOLERANCE ) const

◆ IsValid()

ON_BOOL32 ON_BrepEdge::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

◆ ObjectType()

ON::object_type ON_BrepEdge::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

◆ ON_OBJECT_DECLARE()

ON_BrepEdge::ON_OBJECT_DECLARE ( ON_BrepEdge )

private

◆ operator=()

ON_BrepEdge & ON_BrepEdge::operator= ( const ON_BrepEdge & src )

◆ Read()

ON_BOOL32 ON_BrepEdge::Read ( ON_BinaryArchive & file )

virtual

Reimplemented from ON_Object.

◆ Reverse()

ON_BOOL32 ON_BrepEdge::Reverse ( )

virtual

Implements ON_Curve.

◆ SetEndPoint()

ON_BOOL32 ON_BrepEdge::SetEndPoint ( ON_3dPoint end_point )

virtual

Reimplemented from ON_Curve.

◆ SetStartPoint()

ON_BOOL32 ON_BrepEdge::SetStartPoint ( ON_3dPoint start_point )

virtual

Reimplemented from ON_Curve.

◆ SizeOf()

unsigned int ON_BrepEdge::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

◆ Trim()

ON_BrepTrim * ON_BrepEdge::Trim ( int eti ) const

◆ TrimCount()

int ON_BrepEdge::TrimCount ( ) const

◆ Vertex()

ON_BrepVertex * ON_BrepEdge::Vertex ( int evi ) const

◆ Write()

ON_BOOL32 ON_BrepEdge::Write ( ON_BinaryArchive & file ) const

virtual

Reimplemented from ON_Object.

Friends And Related Symbol Documentation

◆ ON_Brep

friend class ON_Brep

friend

Member Data Documentation

◆ m_brep

ON_Brep* ON_BrepEdge::m_brep

private

◆ m_c3i

int ON_BrepEdge::m_c3i

◆ m_edge_index

int ON_BrepEdge::m_edge_index

◆ m_edge_user

ON_U ON_BrepEdge::m_edge_user

◆ m_ti

ON_SimpleArray<int> ON_BrepEdge::m_ti

◆ m_tolerance

double ON_BrepEdge::m_tolerance

◆ m_vi

int ON_BrepEdge::m_vi[2]

The documentation for this class was generated from the following files:

src/3rdparty/legacy/opennurbs/opennurbs_brep.h
src/3rdparty/legacy/opennurbs/opennurbs_brep.cpp
src/3rdparty/legacy/opennurbs/opennurbs_brep_io.cpp
src/3rdparty/legacy/opennurbs/opennurbs_brep_tools.cpp

Public Member Functions

Public Attributes

Private Member Functions

Private Attributes

Friends

Additional Inherited Members

Constructor & Destructor Documentation

◆ ON_BrepEdge() [1/3]

◆ ON_BrepEdge() [2/3]

◆ ON_BrepEdge() [3/3]

Member Function Documentation

◆ Brep()

◆ ChangeEdgeCurve()

◆ ComponentIndex()

◆ DataCRC()

◆ Dump()

◆ EdgeCurveIndexOf()

◆ EdgeCurveOf()

◆ IsClosed()

◆ IsSmoothManifoldEdge()

◆ IsValid()

◆ ObjectType()

◆ ON_OBJECT_DECLARE()

◆ operator=()

◆ Read()

◆ Reverse()

◆ SetEndPoint()

◆ SetStartPoint()

◆ SizeOf()

◆ Trim()

◆ TrimCount()

◆ Vertex()

◆ Write()

Friends And Related Symbol Documentation

◆ ON_Brep

Member Data Documentation

◆ m_brep

◆ m_c3i

◆ m_edge_index

◆ m_edge_user

◆ m_ti

◆ m_tolerance

◆ m_vi