ON_Extrusion Class Reference

#include <opennurbs_beam.h>

Inheritance diagram for ON_Extrusion:

Public Member Functions
bool	AddInnerProfile (ON_Curve *inner_profile)
ON_Brep *	BrepForm (ON_Brep *brep, bool bSplitKinkyFaces) const
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
ON_Mesh *	CreateMesh (const ON_MeshParameters &mp, ON_Mesh *mesh=NULL) const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
int	Degree (int dir) const
void	Destroy ()
int	Dimension () const
ON_Interval	Domain (int dir) const
void	Dump (ON_TextLog &) const
ON_BOOL32	Evaluate (double u, double v, int num_der, int array_stride, double *der_array, int quadrant=0, int *hint=0) const
bool	Extend (int dir, const ON_Interval &domain)
ON_BOOL32	GetBBox (double *boxmin, double *boxmax, int bGrowBox=false) const
bool	GetClosestPoint (const ON_3dPoint &P, double *s, double *t, double maximum_distance=0.0, const ON_Interval *sdomain=0, const ON_Interval *tdomain=0) const
ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double, double *, double *, const ON_Interval *=NULL, const ON_Interval *=NULL) const
void	GetMiterPlaneNormal (int end, ON_3dVector &N) const
bool	GetNextDiscontinuity (int dir, ON::continuity c, double t0, double t1, double *t, int *hint=NULL, int *dtype=NULL, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const
int	GetNurbForm (ON_NurbsSurface &nurbs_surface, double tolerance=0.0) const
bool	GetNurbFormParameterFromSurfaceParameter (double surface_s, double surface_t, double *nurbs_s, double *nurbs_t) const
ON_BOOL32	GetParameterTolerance (int dir, double t, double *tminus, double *tplus) const
bool	GetPathPlane (double s, ON_Plane &plane) const
int	GetProfileCurves (ON_SimpleArray< const ON_Curve * > &profile_curves) const
bool	GetProfilePlane (double s, ON_Plane &plane) const
bool	GetProfileTransformation (double s, ON_Xform &xform) const
ON_BOOL32	GetSpanVector (int dir, double *span_vector) const
ON_BOOL32	GetSpanVectorIndex (int dir, double t, int side, int *span_vector_index, ON_Interval *span_interval) const
bool	GetSurfaceParameterFromNurbFormParameter (double nurbs_s, double nurbs_t, double *surface_s, double *surface_t) const
ON_BOOL32	GetSurfaceSize (double *width, double *height) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
int	HasNurbForm () const
int	IsCapped () const
ON_BOOL32	IsClosed (int) const
bool	IsContinuous (ON::continuity c, double s, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const
ISO	IsIsoparametric (const ON_BoundingBox &bbox) const
ISO	IsIsoparametric (const ON_Curve &curve, const ON_Interval *curve_domain=NULL) const
int	IsMitered () const
ON_Curve *	IsoCurve (int dir, double c) const
ON_BOOL32	IsPeriodic (int) const
ON_BOOL32	IsPlanar (ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsSolid () const
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
ON::object_type	ObjectType () const
	ON_Extrusion ()
	ON_Extrusion (const ON_Extrusion &src)
ON_Extrusion &	operator= (const ON_Extrusion &)
ON_3dPoint	PathEnd () const
int	PathParameter () const
ON_3dPoint	PathStart () const
ON_3dVector	PathTangent () const
const ON_PolyCurve *	PolyProfile () const
const ON_Curve *	Profile (int profile_index) const
ON_Curve *	Profile3d (int profile_index, double s) const
ON_Curve *	Profile3d (ON_COMPONENT_INDEX ci) const
int	ProfileCount () const
int	ProfileParameter () const
ON_BOOL32	Read (ON_BinaryArchive &binary_archive)
ON_BOOL32	Reverse (int dir)
ON_BOOL32	SetDomain (int dir, double t0, double t1)
bool	SetMiterPlaneNormal (ON_3dVector N, int end)
bool	SetOuterProfile (ON_Curve *outer_profile, bool bCap)
bool	SetPath (ON_3dPoint A, ON_3dPoint B)
bool	SetPathAndUp (ON_3dPoint A, ON_3dPoint B, ON_3dVector up)
unsigned int	SizeOf () const
int	SpanCount (int dir) const
ON_BOOL32	Split (int dir, double c, ON_Surface *&west_or_south_side, ON_Surface *&east_or_north_side) const
ON_BOOL32	Transform (const ON_Xform &xform)
ON_BOOL32	Transpose ()
ON_BOOL32	Trim (int dir, const ON_Interval &domain)
ON_BOOL32	Write (ON_BinaryArchive &binary_archive) const
	~ON_Extrusion ()
Public Member Functions inherited from ON_Surface
bool	AreaMassProperties (ON_MassProperties &mp, bool bArea=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
virtual ON_SurfaceTree *	CreateSurfaceTree () const
void	DestroyRuntimeCache (bool bDelete=true)
void	DestroySurfaceTree ()
virtual ON_Surface *	DuplicateSurface () const
ON_BOOL32	Ev1Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, int quadrant=0, int *hint=0) const
ON_BOOL32	Ev2Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &duu, ON_3dVector &duv, ON_3dVector &dvv, int quadrant=0, int *hint=0) const
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &normal, int=0, int *=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvPoint (double u, double v, ON_3dPoint &point, int quadrant=0, int *hint=0) const
ON_BOOL32	FrameAt (double u, double v, ON_Plane &frame) const
ON_BOOL32	GetDomain (int dir, double *t0, double *t1) const
ON_BOOL32	HasBrepForm () const
int	IntersectSurface (const ON_Surface *surfaceB, ON_ClassArray< ON_SSX_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, double fitting_tolerance=0.0, const ON_Interval *surfaceA_udomain=0, const ON_Interval *surfaceA_vdomain=0, const ON_Interval *surfaceB_udomain=0, const ON_Interval *surfaceB_vdomain=0) const
int	IsAtSeam (double s, double t) const
bool	IsAtSingularity (double s, double t, bool bExact=true) const
bool	IsCone (ON_Cone *cone=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsCylinder (ON_Cylinder *cylinder=NULL, double tolerance=ON_ZERO_TOLERANCE) const
virtual ON_BOOL32	IsSingular (int) const
bool	IsSolid () const
bool	IsSphere (ON_Sphere *sphere=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsTorus (ON_Torus *torus=NULL, double tolerance=ON_ZERO_TOLERANCE) const
ON_3dVector	NormalAt (double, double) const
ON_NurbsSurface *	NurbsSurface (ON_NurbsSurface *pNurbsSurface=NULL, double tolerance=0.0, const ON_Interval *s_subdomain=NULL, const ON_Interval *t_subdomain=NULL) const
ON::object_type	ObjectType () const
virtual ON_Surface *	Offset (double offset_distance, double tolerance, double *max_deviation=NULL) const
	ON_Surface ()
	ON_Surface (const ON_Surface &)
ON_Surface &	operator= (const ON_Surface &)
ON_3dPoint	PointAt (double, double) const
virtual ON_Curve *	Pullback (const ON_Curve &curve_3d, double tolerance, const ON_Interval *curve_3d_subdomain=NULL, ON_3dPoint start_uv=ON_UNSET_POINT, ON_3dPoint end_uv=ON_UNSET_POINT) const
virtual ON_Curve *	Pushup (const ON_Curve &curve_2d, double tolerance, const ON_Interval *curve_2d_subdomain=NULL) const
bool	SetDomain (int dir, ON_Interval domain)
unsigned int	SizeOf () const
const ON_SurfaceTree *	SurfaceTree () const
bool	VolumeMassProperties (ON_MassProperties &mp, bool bVolume=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, ON_3dPoint base_point=ON_UNSET_POINT, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const
virtual	~ON_Surface ()
Public Member Functions inherited from ON_Geometry
ON_BoundingBox	BoundingBox () const
virtual void	ClearBoundingBox ()
virtual ON_COMPONENT_INDEX	ComponentIndex () const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
virtual bool	IsDeformable () const
virtual bool	IsMorphable () const
virtual bool	MakeDeformable ()
virtual bool	Morph (const ON_SpaceMorph &morph)
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Scale (double scale_factor)
virtual ON_BOOL32	SwapCoordinates (int i, int j)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
virtual	~ON_Geometry ()
Public Member Functions inherited from ON_Object
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
bool	CopyFrom (const ON_Object *src)
void	CopyUserData (const ON_Object &source_object)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	FirstUserData () const
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual void	MemoryRelocate ()
virtual ON_UUID	ModelObjectId () const
void	MoveUserData (ON_Object &source_object)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
void	PurgeUserData ()
bool	SetUserString (const wchar_t *key, const wchar_t *string_value)
void	TransformUserData (const ON_Xform &xform)
virtual	~ON_Object ()

Static Public Member Functions
static bool	CleanupPolyCurveProfile (ON_PolyCurve &polycurve)
static ON_Extrusion *	Cylinder (const ON_Cylinder &cylinder, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
static bool	IsValidPolyCurveProfile (const ON_PolyCurve &polycurve, ON_TextLog *text_log=0)
static ON_Extrusion *	Pipe (const ON_Cylinder &cylinder, double other_radius, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
Static Public Member Functions inherited from ON_Surface
static class ON_NurbsSurface *	CreateCubicLoft (int curve_count, const ON_Curve *const *curve_list, double k, int is_closed=0, ON::cubic_loft_end_condition start_shape=ON::cubic_loft_ec_quadratic, ON::cubic_loft_end_condition end_shape=ON::cubic_loft_ec_quadratic, class ON_NurbsSurface *nurbs_surface=0)

Public Attributes
bool	m_bCap [2]
bool	m_bHaveN [2]
bool	m_bTransposed
ON_3dVector	m_N [2]
ON_Line	m_path
ON_Interval	m_path_domain
ON_Curve *	m_profile
int	m_profile_count
ON_Interval	m_t
ON_3dVector	m_up
Public Attributes inherited from ON_Object
ON_MEMORY_POOL *	m_mempool

Static Public Attributes
static const double	m_Nz_min = 1.0/64.0
static const double	m_path_length_min = ON_ZERO_TOLERANCE

Private Member Functions
	ON_OBJECT_DECLARE (ON_Extrusion)

Additional Inherited Members
Public Types inherited from ON_Surface
enum	ISO {   not_iso = 0 , x_iso = 1 , y_iso = 2 , W_iso = 3 ,   S_iso = 4 , E_iso = 5 , N_iso = 6 , iso_count = 7 }
Protected Member Functions inherited from ON_Surface
ON_Curve *	PullbackCurveProxy (const ON_CurveProxy &curveproxy_3d, double tolerance, const ON_Interval *curve_3d_subdomain, ON_3dPoint start_uv, ON_3dPoint end_uv) const
ON_Curve *	PullbackPolyCurve (const ON_PolyCurve &polycurve_3d, double tolerance, const ON_Interval *curve_3d_subdomain, ON_3dPoint start_uv, ON_3dPoint end_uv) const
ON_Curve *	PushupCurveProxy (const ON_CurveProxy &curveproxy_2d, double tolerance, const ON_Interval *curve_2d_subdomain) const
ON_Curve *	PushupPolyCurve (const ON_PolyCurve &polycurve_2d, double tolerance, const ON_Interval *curve_2d_subdomain) const
Protected Attributes inherited from ON_Surface
ON_SurfaceTree *	m_stree

Constructor & Destructor Documentation

ON_Extrusion() [1/2]

ON_Extrusion::ON_Extrusion

(

)

ON_Extrusion() [2/2]

ON_Extrusion::ON_Extrusion

(

const ON_Extrusion &

src

)

~ON_Extrusion()

ON_Extrusion::~ON_Extrusion

(

)

Member Function Documentation

AddInnerProfile()

bool ON_Extrusion::AddInnerProfile

(

ON_Curve *

inner_profile

)

BrepForm() [1/2]

ON_Brep * ON_Extrusion::BrepForm	(	ON_Brep *	brep,
		bool	bSplitKinkyFaces ) const

BrepForm() [2/2]

ON_Brep * ON_Extrusion::BrepForm ( ON_Brep * brep = NULL ) const

virtual

Reimplemented from ON_Geometry.

CleanupPolyCurveProfile()

bool ON_Extrusion::CleanupPolyCurveProfile ( ON_PolyCurve & polycurve )

static

CreateMesh()

ON_Mesh * ON_Extrusion::CreateMesh ( const ON_MeshParameters & mp, ON_Mesh * mesh = NULL ) const

virtual

Reimplemented from ON_Surface.

Cylinder()

ON_Extrusion * ON_Extrusion::Cylinder ( const ON_Cylinder & cylinder, bool bCapBottom, bool bCapTop, ON_Extrusion * extrusion = 0 )

static

DataCRC()

ON__UINT32 ON_Extrusion::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

Degree()

int ON_Extrusion::Degree ( int dir ) const

virtual

Implements ON_Surface.

Destroy()

void ON_Extrusion::Destroy

(

)

Dimension()

int ON_Extrusion::Dimension ( ) const

virtual

Implements ON_Geometry.

Domain()

ON_Interval ON_Extrusion::Domain ( int dir ) const

virtual

Implements ON_Surface.

Dump()

void ON_Extrusion::Dump ( ON_TextLog & text_log ) const

virtual

Reimplemented from ON_Object.

Evaluate()

ON_BOOL32 ON_Extrusion::Evaluate ( double u, double v, int num_der, int array_stride, double * der_array, int quadrant = 0, int * hint = 0 ) const

virtual

Implements ON_Surface.

Extend()

bool ON_Extrusion::Extend ( int dir, const ON_Interval & domain )

virtual

Reimplemented from ON_Surface.

GetBBox()

ON_BOOL32 ON_Extrusion::GetBBox ( double * boxmin, double * boxmax, int bGrowBox = false ) const

virtual

Implements ON_Geometry.

GetClosestPoint()

bool ON_Extrusion::GetClosestPoint ( const ON_3dPoint & P, double * s, double * t, double maximum_distance = 0.0, const ON_Interval * sdomain = 0, const ON_Interval * tdomain = 0 ) const

virtual

Reimplemented from ON_Surface.

GetLocalClosestPoint()

ON_BOOL32 ON_Extrusion::GetLocalClosestPoint ( const ON_3dPoint & test_point, double s0, double t0, double * s, double * t, const ON_Interval * sdomain = NULL, const ON_Interval * tdomain = NULL ) const

virtual

Reimplemented from ON_Surface.

GetMiterPlaneNormal()

void ON_Extrusion::GetMiterPlaneNormal	(	int	end,
		ON_3dVector &	N ) const

GetNextDiscontinuity()

bool ON_Extrusion::GetNextDiscontinuity ( int dir, ON::continuity c, double t0, double t1, double * t, int * hint = NULL, int * dtype = NULL, double cos_angle_tolerance = 0.99984769515639123915701155881391, double curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Surface.

GetNurbForm()

int ON_Extrusion::GetNurbForm ( ON_NurbsSurface & nurbs_surface, double tolerance = 0.0 ) const

virtual

Reimplemented from ON_Surface.

GetNurbFormParameterFromSurfaceParameter()

bool ON_Extrusion::GetNurbFormParameterFromSurfaceParameter ( double surface_s, double surface_t, double * nurbs_s, double * nurbs_t ) const

virtual

Reimplemented from ON_Surface.

GetParameterTolerance()

ON_BOOL32 ON_Extrusion::GetParameterTolerance ( int dir, double t, double * tminus, double * tplus ) const

virtual

Reimplemented from ON_Surface.

GetPathPlane()

bool ON_Extrusion::GetPathPlane	(	double	s,
		ON_Plane &	plane ) const

GetProfileCurves()

int ON_Extrusion::GetProfileCurves

(

ON_SimpleArray< const ON_Curve * > &

profile_curves

)

const

GetProfilePlane()

bool ON_Extrusion::GetProfilePlane	(	double	s,
		ON_Plane &	plane ) const

GetProfileTransformation()

bool ON_Extrusion::GetProfileTransformation	(	double	s,
		ON_Xform &	xform ) const

GetSpanVector()

ON_BOOL32 ON_Extrusion::GetSpanVector ( int dir, double * span_vector ) const

virtual

Implements ON_Surface.

GetSpanVectorIndex()

ON_BOOL32 ON_Extrusion::GetSpanVectorIndex ( int dir, double t, int side, int * span_vector_index, ON_Interval * span_interval ) const

virtual

Reimplemented from ON_Surface.

GetSurfaceParameterFromNurbFormParameter()

bool ON_Extrusion::GetSurfaceParameterFromNurbFormParameter ( double nurbs_s, double nurbs_t, double * surface_s, double * surface_t ) const

virtual

Reimplemented from ON_Surface.

GetSurfaceSize()

ON_BOOL32 ON_Extrusion::GetSurfaceSize ( double * width, double * height ) const

virtual

Reimplemented from ON_Surface.

GetTightBoundingBox()

bool ON_Extrusion::GetTightBoundingBox ( ON_BoundingBox & tight_bbox, int bGrowBox = false, const ON_Xform * xform = 0 ) const

virtual

Reimplemented from ON_Geometry.

HasNurbForm()

int ON_Extrusion::HasNurbForm ( ) const

virtual

Reimplemented from ON_Surface.

IsCapped()

int ON_Extrusion::IsCapped

(

)

const

IsClosed()

ON_BOOL32 ON_Extrusion::IsClosed ( int dir ) const

virtual

Reimplemented from ON_Surface.

IsContinuous()

bool ON_Extrusion::IsContinuous ( ON::continuity c, double s, double t, int * hint = NULL, double point_tolerance = ON_ZERO_TOLERANCE, double d1_tolerance = ON_ZERO_TOLERANCE, double d2_tolerance = ON_ZERO_TOLERANCE, double cos_angle_tolerance = 0.99984769515639123915701155881391, double curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Surface.

IsIsoparametric() [1/2]

ON_Surface::ISO ON_Extrusion::IsIsoparametric ( const ON_BoundingBox & bbox ) const

virtual

Reimplemented from ON_Surface.

IsIsoparametric() [2/2]

ON_Surface::ISO ON_Extrusion::IsIsoparametric ( const ON_Curve & curve, const ON_Interval * curve_domain = NULL ) const

virtual

Reimplemented from ON_Surface.

IsMitered()

int ON_Extrusion::IsMitered

(

)

const

IsoCurve()

ON_Curve * ON_Extrusion::IsoCurve ( int dir, double c ) const

virtual

Reimplemented from ON_Surface.

IsPeriodic()

ON_BOOL32 ON_Extrusion::IsPeriodic ( int dir ) const

virtual

Reimplemented from ON_Surface.

IsPlanar()

ON_BOOL32 ON_Extrusion::IsPlanar ( ON_Plane * plane = NULL, double tolerance = ON_ZERO_TOLERANCE ) const

virtual

Reimplemented from ON_Surface.

IsSolid()

bool ON_Extrusion::IsSolid

(

)

const

IsValid()

ON_BOOL32 ON_Extrusion::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

IsValidPolyCurveProfile()

bool ON_Extrusion::IsValidPolyCurveProfile ( const ON_PolyCurve & polycurve, ON_TextLog * text_log = 0 )

static

ObjectType()

ON::object_type ON_Extrusion::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

ON_OBJECT_DECLARE()

ON_Extrusion::ON_OBJECT_DECLARE ( ON_Extrusion )

private

operator=()

ON_Extrusion & ON_Extrusion::operator=

(

const ON_Extrusion &

src

)

PathEnd()

ON_3dPoint ON_Extrusion::PathEnd

(

)

const

PathParameter()

int ON_Extrusion::PathParameter

(

)

const

PathStart()

ON_3dPoint ON_Extrusion::PathStart

(

)

const

PathTangent()

ON_3dVector ON_Extrusion::PathTangent

(

)

const

Pipe()

ON_Extrusion * ON_Extrusion::Pipe ( const ON_Cylinder & cylinder, double other_radius, bool bCapBottom, bool bCapTop, ON_Extrusion * extrusion = 0 )

static

PolyProfile()

const ON_PolyCurve * ON_Extrusion::PolyProfile

(

)

const

Profile()

const ON_Curve * ON_Extrusion::Profile

(

int

profile_index

)

const

Profile3d() [1/2]

ON_Curve * ON_Extrusion::Profile3d	(	int	profile_index,
		double	s ) const

Profile3d() [2/2]

ON_Curve * ON_Extrusion::Profile3d

(

ON_COMPONENT_INDEX

ci

)

const

ProfileCount()

int ON_Extrusion::ProfileCount

(

)

const

ProfileParameter()

int ON_Extrusion::ProfileParameter

(

)

const

Read()

ON_BOOL32 ON_Extrusion::Read ( ON_BinaryArchive & binary_archive )

virtual

Reimplemented from ON_Object.

Reverse()

ON_BOOL32 ON_Extrusion::Reverse ( int dir )

virtual

Implements ON_Surface.

SetDomain()

ON_BOOL32 ON_Extrusion::SetDomain ( int dir, double t0, double t1 )

virtual

Reimplemented from ON_Surface.

SetMiterPlaneNormal()

bool ON_Extrusion::SetMiterPlaneNormal	(	ON_3dVector	N,
		int	end )

SetOuterProfile()

bool ON_Extrusion::SetOuterProfile	(	ON_Curve *	outer_profile,
		bool	bCap )

SetPath()

bool ON_Extrusion::SetPath	(	ON_3dPoint	A,
		ON_3dPoint	B )

SetPathAndUp()

bool ON_Extrusion::SetPathAndUp	(	ON_3dPoint	A,
		ON_3dPoint	B,
		ON_3dVector	up )

SizeOf()

unsigned int ON_Extrusion::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

SpanCount()

int ON_Extrusion::SpanCount ( int dir ) const

virtual

Implements ON_Surface.

Split()

ON_BOOL32 ON_Extrusion::Split ( int dir, double c, ON_Surface *& west_or_south_side, ON_Surface *& east_or_north_side ) const

virtual

Reimplemented from ON_Surface.

Transform()

ON_BOOL32 ON_Extrusion::Transform ( const ON_Xform & xform )

virtual

Reimplemented from ON_Geometry.

Transpose()

ON_BOOL32 ON_Extrusion::Transpose ( )

virtual

Implements ON_Surface.

Trim()

ON_BOOL32 ON_Extrusion::Trim ( int dir, const ON_Interval & domain )

virtual

Reimplemented from ON_Surface.

Write()

ON_BOOL32 ON_Extrusion::Write ( ON_BinaryArchive & binary_archive ) const

virtual

Reimplemented from ON_Object.

Member Data Documentation

m_bCap

bool ON_Extrusion::m_bCap[2]

m_bHaveN

bool ON_Extrusion::m_bHaveN[2]

m_bTransposed

bool ON_Extrusion::m_bTransposed

m_N

ON_3dVector ON_Extrusion::m_N[2]

m_Nz_min

const double ON_Extrusion::m_Nz_min = 1.0/64.0

static

m_path

ON_Line ON_Extrusion::m_path

m_path_domain

ON_Interval ON_Extrusion::m_path_domain

m_path_length_min

const double ON_Extrusion::m_path_length_min = ON_ZERO_TOLERANCE

static

m_profile

ON_Curve* ON_Extrusion::m_profile

m_profile_count

int ON_Extrusion::m_profile_count

m_t

ON_Interval ON_Extrusion::m_t

m_up

ON_3dVector ON_Extrusion::m_up

---

The documentation for this class was generated from the following files:

• src/3rdparty/legacy/opennurbs/opennurbs_beam.h
• src/3rdparty/legacy/opennurbs/opennurbs_beam.cpp