#include <opennurbs_planesurface.h>

Inheritance diagram for ON_ClippingPlaneSurface:

Public Member Functions
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const

void	Default ()

void	Dump (ON_TextLog &) const

ON::object_type	ObjectType () const

	ON_ClippingPlaneSurface ()

	ON_ClippingPlaneSurface (const ON_Plane &src)

	ON_ClippingPlaneSurface (const ON_PlaneSurface &src)

ON_ClippingPlaneSurface &	operator= (const ON_Plane &src)

ON_ClippingPlaneSurface &	operator= (const ON_PlaneSurface &src)

ON_BOOL32	Read (ON_BinaryArchive &)

unsigned int	SizeOf () const

ON_BOOL32	Write (ON_BinaryArchive &) const

	~ON_ClippingPlaneSurface ()

Public Member Functions inherited from ON_PlaneSurface
ON_Mesh *	CreateMesh (const ON_MeshParameters &mp, ON_Mesh *mesh=NULL) const

ON__UINT32	DataCRC (ON__UINT32 current_remainder) const

int	Degree (int) const

int	Dimension () const

ON_Interval	Domain (int) const

void	Dump (ON_TextLog &) const

ON_BOOL32	Evaluate (double, double, int, int, double , int=0, int =0) const

bool	Extend (int dir, const ON_Interval &domain)

ON_Interval	Extents (int dir) const

ON_BOOL32	GetBBox (double , double , ON_BOOL32=false) const

bool	GetClosestPoint (const ON_3dPoint &P, double s, double t, double maximum_distance=0.0, const ON_Interval sdomain=0, const ON_Interval tdomain=0) const

ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double, double , double , const ON_Interval =NULL, const ON_Interval =NULL) const

bool	GetNextDiscontinuity (int dir, ON::continuity c, double t0, double t1, double t, int hint=NULL, int *dtype=NULL, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const

int	GetNurbForm (ON_NurbsSurface &, double=0.0) const

ON_BOOL32	GetParameterTolerance (int, double, double , double ) const

ON_BOOL32	GetSpanVector (int, double *) const

ON_BOOL32	GetSurfaceSize (double width, double height) const

int	HasNurbForm () const

ON_BOOL32	IsClosed (int) const

bool	IsContinuous (ON::continuity c, double s, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=0.99984769515639123915701155881391, double curvature_tolerance=ON_SQRT_EPSILON) const

ON_Curve *	IsoCurve (int dir, double c) const

ON_BOOL32	IsPeriodic (int) const

ON_BOOL32	IsPlanar (ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) const

ON_BOOL32	IsSingular (int) const

ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const

ON_Surface *	Offset (double offset_distance, double tolerance, double *max_deviation=NULL) const

	ON_PlaneSurface ()

	ON_PlaneSurface (const ON_Plane &)

	ON_PlaneSurface (const ON_PlaneSurface &)

ON_PlaneSurface &	operator= (const ON_Plane &)

ON_PlaneSurface &	operator= (const ON_PlaneSurface &)

ON_Curve *	Pullback (const ON_Curve &curve_3d, double tolerance, const ON_Interval *curve_3d_subdomain=NULL, ON_3dPoint start_uv=ON_UNSET_POINT, ON_3dPoint end_uv=ON_UNSET_POINT) const

ON_Curve *	Pushup (const ON_Curve &curve_2d, double tolerance, const ON_Interval *curve_2d_subdomain=NULL) const

ON_BOOL32	Read (ON_BinaryArchive &)

ON_BOOL32	Reverse (int)

ON_BOOL32	SetDomain (int dir, double t0, double t1)

bool	SetExtents (int dir, ON_Interval extents, bool bSynchDomain=false)

unsigned int	SizeOf () const

int	SpanCount (int) const

ON_BOOL32	Split (int dir, double c, ON_Surface &west_or_south_side, ON_Surface &east_or_north_side) const

ON_BOOL32	Transform (const ON_Xform &)

ON_BOOL32	Transpose ()

ON_BOOL32	Trim (int dir, const ON_Interval &domain)

ON_BOOL32	Write (ON_BinaryArchive &) const

virtual	~ON_PlaneSurface ()

Public Member Functions inherited from ON_Surface
bool	AreaMassProperties (ON_MassProperties &mp, bool bArea=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const

ON_Brep *	BrepForm (ON_Brep *brep=NULL) const

virtual ON_SurfaceTree *	CreateSurfaceTree () const

void	DestroyRuntimeCache (bool bDelete=true)

void	DestroySurfaceTree ()

virtual ON_Surface *	DuplicateSurface () const

ON_BOOL32	Ev1Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, int quadrant=0, int *hint=0) const

ON_BOOL32	Ev2Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &duu, ON_3dVector &duv, ON_3dVector &dvv, int quadrant=0, int *hint=0) const

bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const

ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &normal, int=0, int *=0) const

ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &normal, int quadrant=0, int *hint=0) const

ON_BOOL32	EvNormal (double u, double v, ON_3dVector &normal, int quadrant=0, int *hint=0) const

ON_BOOL32	EvPoint (double u, double v, ON_3dPoint &point, int quadrant=0, int *hint=0) const

ON_BOOL32	FrameAt (double u, double v, ON_Plane &frame) const

ON_BOOL32	GetDomain (int dir, double t0, double t1) const

virtual bool	GetNurbFormParameterFromSurfaceParameter (double surface_s, double surface_t, double nurbs_s, double nurbs_t) const

virtual ON_BOOL32	GetSpanVectorIndex (int dir, double t, int side, int span_vector_index, ON_Interval span_interval) const

virtual bool	GetSurfaceParameterFromNurbFormParameter (double nurbs_s, double nurbs_t, double surface_s, double surface_t) const

ON_BOOL32	HasBrepForm () const

int	IntersectSurface (const ON_Surface surfaceB, ON_ClassArray< ON_SSX_EVENT > &x, double intersection_tolerance=0.0, double overlap_tolerance=0.0, double fitting_tolerance=0.0, const ON_Interval surfaceA_udomain=0, const ON_Interval surfaceA_vdomain=0, const ON_Interval surfaceB_udomain=0, const ON_Interval *surfaceB_vdomain=0) const

int	IsAtSeam (double s, double t) const

bool	IsAtSingularity (double s, double t, bool bExact=true) const

bool	IsCone (ON_Cone *cone=NULL, double tolerance=ON_ZERO_TOLERANCE) const

bool	IsCylinder (ON_Cylinder *cylinder=NULL, double tolerance=ON_ZERO_TOLERANCE) const

virtual ISO	IsIsoparametric (const ON_BoundingBox &bbox) const

virtual ISO	IsIsoparametric (const ON_Curve &curve, const ON_Interval *curve_domain=NULL) const

bool	IsSolid () const

bool	IsSphere (ON_Sphere *sphere=NULL, double tolerance=ON_ZERO_TOLERANCE) const

bool	IsTorus (ON_Torus *torus=NULL, double tolerance=ON_ZERO_TOLERANCE) const

ON_3dVector	NormalAt (double, double) const

ON_NurbsSurface *	NurbsSurface (ON_NurbsSurface pNurbsSurface=NULL, double tolerance=0.0, const ON_Interval s_subdomain=NULL, const ON_Interval *t_subdomain=NULL) const

ON::object_type	ObjectType () const

	ON_Surface ()

	ON_Surface (const ON_Surface &)

ON_Surface &	operator= (const ON_Surface &)

ON_3dPoint	PointAt (double, double) const

bool	SetDomain (int dir, ON_Interval domain)

unsigned int	SizeOf () const

const ON_SurfaceTree *	SurfaceTree () const

bool	VolumeMassProperties (ON_MassProperties &mp, bool bVolume=true, bool bFirstMoments=true, bool bSecondMoments=true, bool bProductMoments=true, ON_3dPoint base_point=ON_UNSET_POINT, double rel_tol=1.0e-6, double abs_tol=1.0e-6) const

virtual	~ON_Surface ()

Public Member Functions inherited from ON_Geometry
ON_BoundingBox	BoundingBox () const

virtual void	ClearBoundingBox ()

virtual ON_COMPONENT_INDEX	ComponentIndex () const

ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const

ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const

virtual bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const

virtual bool	IsDeformable () const

virtual bool	IsMorphable () const

virtual bool	MakeDeformable ()

virtual bool	Morph (const ON_SpaceMorph &morph)

	ON_Geometry ()

	ON_Geometry (const ON_Geometry &)

ON_Geometry &	operator= (const ON_Geometry &)

ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)

ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)

ON_BOOL32	Scale (double scale_factor)

virtual ON_BOOL32	SwapCoordinates (int i, int j)

ON_BOOL32	Translate (const ON_3dVector &translation_vector)

virtual	~ON_Geometry ()

Public Member Functions inherited from ON_Object
ON_BOOL32	AttachUserData (ON_UserData *pUserData)

bool	CopyFrom (const ON_Object *src)

void	CopyUserData (const ON_Object &source_object)

ON_BOOL32	DetachUserData (ON_UserData *pUserData)

ON_UserData *	FirstUserData () const

ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const

bool	GetUserString (const wchar_t *key, ON_wString &string_value) const

int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const

int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const

ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const

virtual void	MemoryRelocate ()

virtual ON_UUID	ModelObjectId () const

void	MoveUserData (ON_Object &source_object)

	ON_Object ()

	ON_Object (const ON_Object &)

ON_Object &	operator= (const ON_Object &)

void	PurgeUserData ()

bool	SetUserString (const wchar_t key, const wchar_t string_value)

void	TransformUserData (const ON_Xform &xform)

virtual	~ON_Object ()

Public Attributes
ON_ClippingPlane	m_clipping_plane

Public Attributes inherited from ON_PlaneSurface
ON_Plane	m_plane

Public Attributes inherited from ON_Object
ON_MEMORY_POOL *	m_mempool

Private Member Functions
	ON_OBJECT_DECLARE (ON_ClippingPlaneSurface)

Additional Inherited Members
Public Types inherited from ON_Surface
enum	ISO { not_iso = 0 , x_iso = 1 , y_iso = 2 , W_iso = 3 , S_iso = 4 , E_iso = 5 , N_iso = 6 , iso_count = 7 }

Static Public Member Functions inherited from ON_Surface
static class ON_NurbsSurface *	CreateCubicLoft (int curve_count, const ON_Curve const curve_list, double k, int is_closed=0, ON::cubic_loft_end_condition start_shape=ON::cubic_loft_ec_quadratic, ON::cubic_loft_end_condition end_shape=ON::cubic_loft_ec_quadratic, class ON_NurbsSurface *nurbs_surface=0)

Protected Member Functions inherited from ON_Surface
ON_Curve *	PullbackCurveProxy (const ON_CurveProxy &curveproxy_3d, double tolerance, const ON_Interval *curve_3d_subdomain, ON_3dPoint start_uv, ON_3dPoint end_uv) const

ON_Curve *	PullbackPolyCurve (const ON_PolyCurve &polycurve_3d, double tolerance, const ON_Interval *curve_3d_subdomain, ON_3dPoint start_uv, ON_3dPoint end_uv) const

ON_Curve *	PushupCurveProxy (const ON_CurveProxy &curveproxy_2d, double tolerance, const ON_Interval *curve_2d_subdomain) const

ON_Curve *	PushupPolyCurve (const ON_PolyCurve &polycurve_2d, double tolerance, const ON_Interval *curve_2d_subdomain) const

Protected Attributes inherited from ON_PlaneSurface
ON_Interval	m_domain [2]

ON_Interval	m_extents [2]

Protected Attributes inherited from ON_Surface
ON_SurfaceTree *	m_stree

Constructor & Destructor Documentation

◆ ON_ClippingPlaneSurface() [1/3]

ON_ClippingPlaneSurface::ON_ClippingPlaneSurface ( )

◆ ON_ClippingPlaneSurface() [2/3]

ON_ClippingPlaneSurface::ON_ClippingPlaneSurface ( const ON_Plane & src )

◆ ON_ClippingPlaneSurface() [3/3]

ON_ClippingPlaneSurface::ON_ClippingPlaneSurface ( const ON_PlaneSurface & src )

◆ ~ON_ClippingPlaneSurface()

ON_ClippingPlaneSurface::~ON_ClippingPlaneSurface ( )

Member Function Documentation

◆ DataCRC()

ON__UINT32 ON_ClippingPlaneSurface::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Default()

void ON_ClippingPlaneSurface::Default ( )

◆ Dump()

void ON_ClippingPlaneSurface::Dump ( ON_TextLog & text_log ) const

virtual

Reimplemented from ON_Object.

◆ ObjectType()

ON::object_type ON_ClippingPlaneSurface::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

◆ ON_OBJECT_DECLARE()

ON_ClippingPlaneSurface::ON_OBJECT_DECLARE ( ON_ClippingPlaneSurface )

private

◆ operator=() [1/2]

ON_ClippingPlaneSurface & ON_ClippingPlaneSurface::operator= ( const ON_Plane & src )

◆ operator=() [2/2]

ON_ClippingPlaneSurface & ON_ClippingPlaneSurface::operator= ( const ON_PlaneSurface & src )

◆ Read()

ON_BOOL32 ON_ClippingPlaneSurface::Read ( ON_BinaryArchive & file )

virtual

Reimplemented from ON_Object.

◆ SizeOf()

unsigned int ON_ClippingPlaneSurface::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

◆ Write()

ON_BOOL32 ON_ClippingPlaneSurface::Write ( ON_BinaryArchive & file ) const

virtual

Reimplemented from ON_Object.

Member Data Documentation

◆ m_clipping_plane

ON_ClippingPlane ON_ClippingPlaneSurface::m_clipping_plane

The documentation for this class was generated from the following files:

src/3rdparty/legacy/opennurbs/opennurbs_planesurface.h
src/3rdparty/legacy/opennurbs/opennurbs_planesurface.cpp

Public Member Functions

Public Attributes

Private Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ ON_ClippingPlaneSurface() [1/3]

◆ ON_ClippingPlaneSurface() [2/3]

◆ ON_ClippingPlaneSurface() [3/3]

◆ ~ON_ClippingPlaneSurface()

Member Function Documentation

◆ DataCRC()

◆ Default()

◆ Dump()

◆ ObjectType()

◆ ON_OBJECT_DECLARE()

◆ operator=() [1/2]

◆ operator=() [2/2]

◆ Read()

◆ SizeOf()

◆ Write()

Member Data Documentation

◆ m_clipping_plane