Hello,
We have some DWG files that when opend with QCad show entities that not are displayed by TrueView.
Attached example:
Img1.png = DWG file with QCad
Img2.png = DWG file with TrueView
Cad.dwg = DWG for reference.
Anyone know if this behavior is a possible BUG?
O.S. Windows 10 Professional 64 bits
QCAD Professional 3.22.0
Att,
Rhodolfo Novochadlo.
QCad show entities that not are displayed by TrueView
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Junior Member
- Posts: 24
- Joined: Wed Apr 10, 2019 3:51 pm
QCad show entities that not are displayed by TrueView
- Attachments
-
- CAD.dwg
- (137.39 KiB) Downloaded 384 times
-
- Img2.PNG (47.17 KiB) Viewed 2696 times
-
- Img1.PNG (21.64 KiB) Viewed 2696 times
Re: QCad show entities that not are displayed by TrueView
Hello,
That behavior is crazy! The problem is based in the block "croqui". In this block is an info field on the lower right side. They used polylines with "Global Width" instead of hatches. Unusual but it should work anyway.
If I insert this block into the Model_Space it will perfectly work unless I snap to certain snaps.
Test it by yourself: Delete the frame in Model_Space. Then make sure Autosnap is activatet, Insert the block "croqui" and during the block is attached to the mouse pointer move it slowly over the drawing. If you are in a "no snap" area everything is fine - certain snap's will "blow up" the polylines.
I'm sure Andrew will have a look at that.
I don't know if this is a bug ..................... but I would assume so.
That behavior is crazy! The problem is based in the block "croqui". In this block is an info field on the lower right side. They used polylines with "Global Width" instead of hatches. Unusual but it should work anyway.
If I insert this block into the Model_Space it will perfectly work unless I snap to certain snaps.
Test it by yourself: Delete the frame in Model_Space. Then make sure Autosnap is activatet, Insert the block "croqui" and during the block is attached to the mouse pointer move it slowly over the drawing. If you are in a "no snap" area everything is fine - certain snap's will "blow up" the polylines.
I'm sure Andrew will have a look at that.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: QCad show entities that not are displayed by TrueView
The block reference is inserted on a Z level which confuses the 2D engine of QCAD.
To correct:
- Edit > Application Preferences > Widgets > Property Editor > [x] Display Z coordinates
- Select the block reference and change property Position > Z to 0: Usually, you could also use Misc > Modify > Flatten Drawing to 2D, but that tool does not seem to catch this case.
To correct:
- Edit > Application Preferences > Widgets > Property Editor > [x] Display Z coordinates
- Select the block reference and change property Position > Z to 0: Usually, you could also use Misc > Modify > Flatten Drawing to 2D, but that tool does not seem to catch this case.