Hi All
I'm having trouble nesting these parts, could anyone help out here..
Best Regards
John
[SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
[SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)
- Attachments
-
- NestTest-After.dxf
- (208.19 KiB) Downloaded 396 times
-
- NestTest-Before-NoDims.dxf
- (208.09 KiB) Downloaded 383 times
-
- After.jpg (124.72 KiB) Viewed 3830 times
-
- Before.jpg (125.39 KiB) Viewed 3830 times
Last edited by John Hyslop on Wed Nov 20, 2019 10:27 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)
Hi,
QCAD/CAM can't identify the proper shape of the largest part. The 20 mm Circle on the very left side needs a bit of trim work ...
After that is fixed a result could look like this one:
QCAD/CAM can't identify the proper shape of the largest part. The 20 mm Circle on the very left side needs a bit of trim work ...
After that is fixed a result could look like this one:
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)
Hi Husky
Oops... Thanks for that...I did these parts when I 1st started using qcad I think I must of trimmed to vertical construction line through centre of arc...
Good pickup..I should of looked at that seeing as it seperated it when nested
Cheers
John
Oops... Thanks for that...I did these parts when I 1st started using qcad I think I must of trimmed to vertical construction line through centre of arc...
Good pickup..I should of looked at that seeing as it seperated it when nested
Cheers
John
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: [SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)
When my year is up I'm definitely going to upgrade to qcadcam just for the nesting feature.. it's brilliant...
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]