[SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)

Drop in here to discuss whatever you want.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

[SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)

Post by John Hyslop » Wed Nov 20, 2019 6:23 am

Hi All

I'm having trouble nesting these parts, could anyone help out here..

Best Regards

John
Attachments
NestTest-After.dxf
(208.19 KiB) Downloaded 390 times
NestTest-Before-NoDims.dxf
(208.09 KiB) Downloaded 379 times
After.jpg
After.jpg (124.72 KiB) Viewed 3801 times
Before.jpg
Before.jpg (125.39 KiB) Viewed 3801 times
Last edited by John Hyslop on Wed Nov 20, 2019 10:27 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

User avatar
Husky
Moderator/Drawing Help/Testing
Posts: 4935
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)

Post by Husky » Wed Nov 20, 2019 7:27 am

Hi,

QCAD/CAM can't identify the proper shape of the largest part. The 20 mm Circle on the very left side needs a bit of trim work ... :wink:

Husky-2019.11.19-02.png
Husky-2019.11.19-02.png (17.16 KiB) Viewed 3794 times

After that is fixed a result could look like this one:

Husky-2019.11.19-01.png
Husky-2019.11.19-01.png (24.36 KiB) Viewed 3794 times
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)

Post by John Hyslop » Wed Nov 20, 2019 10:26 am

Hi Husky
Oops... Thanks for that...I did these parts when I 1st started using qcad I think I must of trimmed to vertical construction line through centre of arc...
Good pickup..I should of looked at that seeing as it seperated it when nested 😁
Cheers
John
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: [SOLVED] Help testing Trial QcadCam Version: 3.23.0.0 (3.23.0)

Post by John Hyslop » Wed Nov 20, 2019 12:11 pm

When my year is up I'm definitely going to upgrade to qcadcam just for the nesting feature.. it's brilliant...
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

Post Reply

Return to “Chat”