[solved] Empty of drawing

Use this forum for all posts and questions about the free QCAD Community Edition version 3

Moderator: andrew

Post Reply
xogus12
Registered Member
Posts: 2
Joined: Thu Jul 15, 2021 7:17 am

[solved] Empty of drawing

Post by xogus12 » Thu Jul 15, 2021 7:21 am

Hello

I finished the drawing with QCAD professional. 3.26.20
When I opened the drawing on QCAD, there is nothing.

But it's no problem to see it via Autodesk dwg viewer
Would you please advise me how can I open it on QCAD?
Attachments
11111.dxf
(138.04 KiB) Downloaded 325 times

CVH
Premier Member
Posts: 3364
Joined: Wed Sep 27, 2017 4:17 pm

Re: Empty of drawing

Post by CVH » Thu Jul 15, 2021 7:57 am

Hi,
You posted in the free Community Edition.
As PRO user one would post in the PRO forums.

On layer 'Font' there is a line entity with handle =0x40a that is 11111111 units long.
On open, QCAD will auto zoom by default. :wink:

Only found 2 layers with entities on them.

Regards,
CVH

User avatar
Husky
Moderator/Drawing Help/Testing
Posts: 4931
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Empty of drawing

Post by Husky » Thu Jul 15, 2021 8:30 am

xogus12 wrote:
Thu Jul 15, 2021 7:21 am
Would you please advise me how can I open it on QCAD?
Launch Qcad,
load the drawing,
after loading it will show a long horizontal white line (mentioned already by CVH),
select the line and delete it,
use then auto zoom to focus on the drawing - you will find the command below Menu / View / Zoom

Husky-2021.07.15-01.png
Husky-2021.07.15-01.png (45.35 KiB) Viewed 5932 times
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."

xogus12
Registered Member
Posts: 2
Joined: Thu Jul 15, 2021 7:17 am

Re: Empty of drawing

Post by xogus12 » Thu Jul 15, 2021 9:43 am

Dear Husky and CVH

Thank you so much quick solution.
I didn't think about the long line.

Post Reply

Return to “QCAD Community Edition”