[solved] Tab height

Discussions around the CAM Add-On of QCAD.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Indicate the post processor used.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
JanEeBra
Registered Member
Posts: 2
Joined: Mon Nov 15, 2021 3:53 pm

[solved] Tab height

Post by JanEeBra » Mon Nov 15, 2021 4:00 pm

Hi!

Is there any way to configure the height of tabs? When cutting foamboard that is corrugated on both sides, a tab ending up in a thin section of the board is completely lost!

Thanks

User avatar
andrew
Site Admin
Posts: 9036
Joined: Fri Mar 30, 2007 6:07 am

Re: Tab height

Post by andrew » Mon Nov 15, 2021 5:10 pm

While creating a tab, you can set its thickness in the options toolbar:
Screenshot 2021-11-15 at 17.09.21.png
Screenshot 2021-11-15 at 17.09.21.png (12.05 KiB) Viewed 3651 times
You can also adjust this later for one or multiple selected tabs in the property editor.

JanEeBra
Registered Member
Posts: 2
Joined: Mon Nov 15, 2021 3:53 pm

Re: Tab height

Post by JanEeBra » Mon Nov 15, 2021 6:48 pm

I had completely missed that! Thank you!

Post Reply

Return to “QCAD/CAM”