Nesting Problem [ Solved in Snapshot 3.25.2.4.]

Discussions around the CAM Add-On of QCAD.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Indicate the post processor used.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Nesting Problem [ Solved in Snapshot 3.25.2.4.]

Post by John Hyslop » Tue Nov 17, 2020 11:33 am

Hi All

Just wondering if I'm doing something wrong here, I put 100 in nesting qty and it only fills part of the sheet...
I've just recently moved across to linux mint 20

Cheers
John

Version:
3.25.2.0 (3.25.2)
Internet:
QCAD.org
Build Date:
Sep 4 2020
Revision:
4a61501
Qt Version:
4.8.4
Architecture:
x86_64
Compiler:
gcc 4.4.3
Attachments
Untitled.png
Untitled.png (183.09 KiB) Viewed 6618 times
Last edited by John Hyslop on Sun Feb 28, 2021 2:21 pm, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Nesting Problem

Post by andrew » Tue Nov 17, 2020 12:37 pm

Thanks. I can reproduce this (under Linux only).

Bug report at:
https://www.qcad.org/bugtracker/index.p ... sk_id=2135

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Nesting Problem

Post by andrew » Wed Nov 18, 2020 5:54 pm

Snapshot 3.25.2.4 with a fix is now available.

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Nesting Problem [ Solved in Snapshot 3.25.2.4.]

Post by John Hyslop » Thu Dec 03, 2020 7:01 am

Thanks Andrew
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

Post Reply

Return to “QCAD/CAM”