Hello to fellow forum members,

Post to this forum to introduce yourself to this forum if you are new here. You might want to include some information about the work you are doing or planning to do with QCAD.

Moderator: andrew

Post Reply
Robert36
Junior Member
Posts: 15
Joined: Wed Feb 21, 2018 8:37 pm

Hello to fellow forum members,

Post by Robert36 » Wed Feb 21, 2018 8:45 pm

I have been using QCAD since December. This is my maiden voyage as a CAD user of any kind. I am learning CAD primarily to trace vintage plans of balsa Free Flight models both rubber powered and gliders from the mid 1930's through the 1960's. I have a particular interest in designs that came out of Europe during the occupation period. QCAD was suggested to me by a staff member of the Experimental Aeronautical Association. So far, so good.

User avatar
Husky
Moderator/Drawing Help/Testing
Posts: 4935
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Hello to fellow forum members,

Post by Husky » Wed Feb 21, 2018 9:51 pm

Hello Robert36 - welcome to the QCAD Forum.

Vintage plans of balsa Free Flight models? Sound like an interesting Hobby(?). I'm pretty sure QCAD can be a big help to accomplish your goals.
If you need some kind of help with QCAD and can't find a proper corresponding answer in this forum please feel free to ask us - we are here to help. :wink:
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."

Post Reply

Return to “Introduce Yourself”