Dear all,
I sent a few dxf files to a manufacturer.
When he opens the dxf files with Autocad, the dimension lines and arrows can be seen, but no numbers at all. I also see this, when I open the files with Autodesk TrueView.
He says: "When we mark the dimensions, Autocad shows the dimensions, scaled by 0.5" and sent me a picture, where all the dimensions are shown, scaled by 0.5. E.g. the overall length of 50 (mm) is shown as 25.
Can anybody help me, figuring out what I'm doing wrong?
Thank you!
_____________________
Win11 / QCAD Pro 3.25.2.0
Problems with dimensioning
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Problems with dimensioning
- Attachments
-
- Test1.DXF
- (161.21 KiB) Downloaded 218 times
Re: Problems with dimensioning
I can confirm the problem with your file.
Saving the file with QCAD 3.27.6 seems to fix the issue (see attached).
Saving the file with QCAD 3.27.6 seems to fix the issue (see attached).
- Attachments
-
- Test1_fix.dxf
- (153.85 KiB) Downloaded 217 times