Hi Andrew
I'm having some trouble here , this has only happened with the recent release..
I get error messages opening the file can't open file, on restart it went away?
I was testing a very basic pattern... I've also had a few issues with the program
hanging " no response " . never had these issues in the past...attaching the drawing
to see if you can see anything wrong with it... as I said it opens now?
Cheers
John Hyslop
PS Just added Pattern in case it has an issue with it... testing an Imperial pattern
[ Opened After Reboot ]This DXF won't open in QCADCAM 3.25.1.0
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
[ Opened After Reboot ]This DXF won't open in QCADCAM 3.25.1.0
- Attachments
-
- PLATE-05B.PAT
- (717 Bytes) Downloaded 311 times
-
- Pattern Testing.dxf
- (194.72 KiB) Downloaded 324 times
Last edited by John Hyslop on Thu Sep 03, 2020 12:56 pm, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: This DXF won't open in QCADCAM 3.25.1.0
John,
File Opens in QCAD Version 3.24.3.10 (3.24.3.10)
Straight away by double clicking the link in the forum.
Reports: Format: R18 (2004) DXF Drawing (OpenDesign)
For sure it's not the hatch ...
I think I can tell that with my hatching backgrounds.
For sure it aren't the two polys.
As you say it opens now ... We'll never know what happened before the reboot.
Here it's back in R32:
BTW: This is going to be a very steady hatch
Regards,
CVH
File Opens in QCAD Version 3.24.3.10 (3.24.3.10)
Straight away by double clicking the link in the forum.
Reports: Format: R18 (2004) DXF Drawing (OpenDesign)
For sure it's not the hatch ...
I think I can tell that with my hatching backgrounds.
For sure it aren't the two polys.
As you say it opens now ... We'll never know what happened before the reboot.
Here it's back in R32:
BTW: This is going to be a very steady hatch
Regards,
CVH
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: [ Opened After Reboot ]This DXF won't open in QCADCAM 3.25.1.0
Hi Andrew
I think there is a problem, this has never happened before this file took 3 reboots before it opened?
created in Qcad and never opened in any other application, I'm going to install V3.25.0 even though it has
the dimension bug, I rarely use that dimension tool...
Any Ideas what's going on ?
File attached it opens now... but attaching anyway
Best Regards
John Hyslop
I think there is a problem, this has never happened before this file took 3 reboots before it opened?
created in Qcad and never opened in any other application, I'm going to install V3.25.0 even though it has
the dimension bug, I rarely use that dimension tool...
Any Ideas what's going on ?
File attached it opens now... but attaching anyway
Best Regards
John Hyslop
- Attachments
-
- PLATE-01A.DXF
- (218.77 KiB) Downloaded 325 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: [ Opened After Reboot ]This DXF won't open in QCADCAM 3.25.1.0
Sorry, no problem with that file on my machine ....
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: [ Opened After Reboot ]This DXF won't open in QCADCAM 3.25.1.0
None here too.
Got the same file by another channel.
Regards,
CVH
Got the same file by another channel.
Regards,
CVH