When copying / pasting, nothing is inserted.
Edit > Paste does not insert anything
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Edit > Paste does not insert anything
From a QCAD user:
Re: Edit > Paste does not insert anything
When pasting:
- Check that the scale factor (options tool bar at the top) is 1 (or the desired scale factor):
- Check if the units of the source drawing and the target drawing match. If that is not the case, the pasted objects might be very small or very large.
- Check that the layer(s) you are pasting to are not locked. If in doubt, unlock all layers with Layer > Unlock All Layers.
- Check that the scale factor (options tool bar at the top) is 1 (or the desired scale factor):
- Screenshot 2019-09-03 at 15.57.02.png (21.52 KiB) Viewed 2393 times
- Check if the units of the source drawing and the target drawing match. If that is not the case, the pasted objects might be very small or very large.
- Check that the layer(s) you are pasting to are not locked. If in doubt, unlock all layers with Layer > Unlock All Layers.