QCad Pro 3.27.8
I am trying to have my drawing's dimensions display as inches only.
Currently, if I enter , say, 62" as my line length then either check the length with "Info" or actually try to add the dimension on the drawing it shows 5' 2".
I have all settings in "Drawing Preferences" and "Application Preferences" set to inches.
I have even tried "Convert drawing unit" to convert from Feet to Inches, no go.
What am I doing wrong?
Thanx!
[solved] Dimensions in feet
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Dimensions in feet
I wouldn't go that far but you get what you set ...
You may try a different Dimension Label below Drawing Preferences / Dimension / Dimension Settings / Label Format
These are your options on a 62 unit measurement ...
- Husky-2022.12.21-08.png (43.5 KiB) Viewed 1214 times
FYI: "Application Preferences" is meant for new drawing and a few extra QCAD settings - it has no effect on the actual drawing. Relevant for the actual drawing is only "Drawing Preferences".
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Dimensions in feet
Brilliant!!
Thank you so much.
Thank you so much.