Hello,
I am unable to edit the attached dxf file; all the line segments (268) are selected when any one is selected. The file was generated from a sketch in Fusion 360, using a method that I have used at least a dozen times and successfully edited in QCAD. Is there a property that I need to set to successfully edit this file?
I work on a 2018 iMac running Mac OS 12.6 on an Intel Core I5 with 8 GB of memory and 1 TB of storage. I am running QCAD Pro version 3.27.6.
[solved] cannot edit dxf file
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
[solved] cannot edit dxf file
- Attachments
-
- keelProjection.dxf
- (13.42 KiB) Downloaded 164 times
Last edited by silogy on Sat Sep 24, 2022 3:26 pm, edited 1 time in total.
Re: cannot edit dxf file
Hello,
that is a polyline built out of 268 lines.
To have it as single lines select the polyline and explode it. You can find that tool below Menu/Modify) - that's all what it needs ...
that is a polyline built out of 268 lines.
To have it as single lines select the polyline and explode it. You can find that tool below Menu/Modify) - that's all what it needs ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: cannot edit dxf file
Thank you, exploding the poly line worked! I just do not understand how the exported file from Fusion 360 became a poly line.