Is it possible to add a shortcut to the layer state menu. It would be quicker to use a shortcut rather than hunting through the menus.
Any help would be appreciated.
Layer States Solved
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Layer States Solved
Last edited by seasdes on Fri Feb 26, 2021 11:06 pm, edited 1 time in total.
seasdes
QCAD Pro V3.27.8
User since 2021
W10
QCAD Pro V3.27.8
User since 2021
W10
Re: Layer States
Add layer states: YM
New created layerstates will get an automated shortcut like Y1, Y2, Y3 etc.,
Y1, Y2, Y3 etc can then be used to activate a layer state,
to see which shortcut is used for which layer state just hunt through the menus
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Layer States
Thanks Husky. I appreciate your help. I didn't explain myself clearly enough. I just needed a shortcut to get to the highlighted part of the menu as shown below.
seasdes
QCAD Pro V3.27.8
User since 2021
W10
QCAD Pro V3.27.8
User since 2021
W10
Re: Layer States
To get that menu in windows you can use Alt+L, s, s, s
or use the arrow keys
Alt+L, arrow key up (yes - up!), arrow key right, etc. etc. - you get the idea ...
No idea how it works on other OS ...
Why I have the feeling that is still not what you are looking for ...
or use the arrow keys
Alt+L, arrow key up (yes - up!), arrow key right, etc. etc. - you get the idea ...
No idea how it works on other OS ...
Why I have the feeling that is still not what you are looking for ...
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Layer States
Great. Exactly what I was after.Husky wrote: ↑Wed Feb 24, 2021 7:00 amTo get that menu in windows you can use Alt+L, s, s, s
or use the arrow keys
Alt+L, arrow key up (yes - up!), arrow key right, etc. etc. - you get the idea ...
No idea how it works on other OS ...
Why I have the feeling that is still not what you are looking for ...
seasdes
QCAD Pro V3.27.8
User since 2021
W10
QCAD Pro V3.27.8
User since 2021
W10
Re: Layer States
Actually Alt+L works on Windows. I just remembered its a Windows thing.
seasdes
QCAD Pro V3.27.8
User since 2021
W10
QCAD Pro V3.27.8
User since 2021
W10