Solved
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Line
Hi Certina,
make sure all those lines are on the same layer. Then change the layer attribute "Line weight" to 1 mm.
make sure all those lines are on the same layer. Then change the layer attribute "Line weight" to 1 mm.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Line
It is a fundamental concept in CAD to control Attributes for entities like Line weight, color etc. within a layer. The concept of a layer can be study in this tutorial:
https://qcad.org/en/tutorial-working-with-layers
https://qcad.org/en/tutorial-working-with-layers
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Line
It'll definitively work in the QCAD trial version! Do you have any CAD experience?
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Line
Please refer to the already given tutorial.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Line
Hi Certina,
First things first:
Pls read the Forum Rules at the top
OS? Version? QCAD version?
Like Husky explained:
But I agree that the tutorial doesn't explain everything in the finest details ... for all cases ...
If the trial version bothers you: (after a certain period)
Then I presume only 'Layer 0' exist and one can set the Lineweight the same as mentioned.
Alternative: Save File .. Close & ReBoot QCAD .. Open File (If not loading by itself)
Immediately start with adding your specific Layers.
Q?: Are all the line entities on the same Layer?
Y/N: Do this for that Layer / all the Layers.
Layer List .. Double-Click Layer name >> Layer Dialog .. Change Lineweight to the desired weight.
or select the Layer in the Layer List with a single click (= set active) and click on the pencil.
or when already active Type 'YE'
When you can't answer the Question: Type 'TA' and report what the selection tells you.
See the Property Editor .. General Properties .. Layer:
If you don't have a layer List visible .. Type 'GY' (= Menu View .. Layer List)
The 'GY' command may not comply in certain cases:
- Click anywhere in the void in Model_Space and try again.
- Or hit Space and enter 'GY' in the Command line.
- Or click on the Command Line and enter 'GY'
If all this failed I presume there is something wrong with your file or your installation.
A screenshot may clear things out.
You can also post your drawing or PM it (Private Msg).
Regards,
CVH
First things first:
Pls read the Forum Rules at the top
OS? Version? QCAD version?
Like Husky explained:
But I agree that the tutorial doesn't explain everything in the finest details ... for all cases ...
If the trial version bothers you: (after a certain period)
Then I presume only 'Layer 0' exist and one can set the Lineweight the same as mentioned.
Alternative: Save File .. Close & ReBoot QCAD .. Open File (If not loading by itself)
Immediately start with adding your specific Layers.
Q?: Are all the line entities on the same Layer?
Y/N: Do this for that Layer / all the Layers.
Layer List .. Double-Click Layer name >> Layer Dialog .. Change Lineweight to the desired weight.
or select the Layer in the Layer List with a single click (= set active) and click on the pencil.
or when already active Type 'YE'
When you can't answer the Question: Type 'TA' and report what the selection tells you.
See the Property Editor .. General Properties .. Layer:
If you don't have a layer List visible .. Type 'GY' (= Menu View .. Layer List)
The 'GY' command may not comply in certain cases:
- Click anywhere in the void in Model_Space and try again.
- Or hit Space and enter 'GY' in the Command line.
- Or click on the Command Line and enter 'GY'
If all this failed I presume there is something wrong with your file or your installation.
A screenshot may clear things out.
You can also post your drawing or PM it (Private Msg).
Regards,
CVH