I can't find the options toolbar to set the offset distance.
Trying to follow instructions on page 109 of QCAD Book - they show how to create a polyline offset.
Draw --> Polyline --> Offset
Although I can create a polyline offset I'm stuck with whatever the default distance there is - I do not see any place to enter an offset value. According to the instructions on page 110 - I need to locate this options toolbar - but I just don't see it or don't know where it is.
Any help appreciated.
macOS High Sierra (Ver. 10.13.6)
QCAD Professional Ver. 3.22.1.0 (3.22.1)
Setting Offset Distance - How?
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Setting Offset Distance - How?
Hi,
the option bar should be visible AFTER a tool is launched with option capability. The bar pops up above the drawing area like ...
If you can't see the option bar at all please make first sure the option bar is activated below ...
the option bar should be visible AFTER a tool is launched with option capability. The bar pops up above the drawing area like ...
- Husky-2019.07.25-03.png (19.69 KiB) Viewed 4058 times
If you can't see the option bar at all please make first sure the option bar is activated below ...
- Husky-2019.07.25-02.png (91.6 KiB) Viewed 4058 times
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."