Qcad version 3.21.2
Operating System Windows 7
Created a drawing and went to dimension it. Dimension settings are as follows:
Scale Factor 1
Format: Architectural
Precision: 0'-0 1/4"
Have a line which shows it's length as 2.5" in the Properties Editor
When dimensioned horizontally lists out as 5' 7.25"
How do I change the settings to get the dimention to reflect the correct length of the line.
I would like the dimension format to reflect the length as 2.5"
How to change dimension units
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: How to change dimension units
When you launch a dimension tool an option bar will pop up. Please make sure that the scale factor is 1:1.
If that isn't the reason for your issue please attache an example drawing to the post. Thanks.
If that isn't the reason for your issue please attache an example drawing to the post. Thanks.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."