Greetings all, often when I reopen a drawing that I have not used in a long time or from another program it is super zoomed out and hard to find the actual drawing to zoom into.
Is there a hand 'browse' tool that will push the drawing around for me?
Thanks in advance.
Browse Tool?
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Browse Tool?
Auto zoom should usually do the trick:
View > Zoom > Auto Zoom
If not, there are entities (probably unwanted entities) causing the auto zoom to be off. To get more detailed help, please attach your drawing file.
View > Zoom > Auto Zoom
If not, there are entities (probably unwanted entities) causing the auto zoom to be off. To get more detailed help, please attach your drawing file.
Re: Browse Tool?
Hi,
you can adjust the Load settings below Graphics View / Appearance
That will cover ALL entities on load but nothing more. The rest can be done easily with the zoom tools.
you can adjust the Load settings below Graphics View / Appearance
That will cover ALL entities on load but nothing more. The rest can be done easily with the zoom tools.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Browse Tool?
Thanks All!