Page 2 of 8
Re: Free Hatch Patterns
Posted: Sat Nov 23, 2019 3:00 am
by John Hyslop
Hi All
I've added headers to all my hatch patterns the header contains this text as suggested by CVH
;By John Hyslop
;Developed in inch as imperial QCAD3 pattern
Here is a fullset of all I have done so far if using Metric download the metric set.. Enjoy
The Dotted Circle Hatches are made with short lines.. not the best practice but ok for representations..
Some Pattern Updates are now on Page 4 of this topic
Re: Free Hatch Patterns
Posted: Sat Nov 23, 2019 6:22 am
by John Hyslop
Seamless MAZE-02 Coming soon
Re: Free Hatch Patterns
Posted: Sat Nov 23, 2019 2:23 pm
by CVH
Forgot the LATTICE-04 Ortho....
You can use 0 (zero) for dashes 1-6 instead of a positive number.
That would render to a dot.
Positive is the length ON.
Negative is the length OFF.
dashes 5,-3,0,-1,0,-1 would be:
bar(5long), space(3), dot, space(1), dot, space(1)
Regards,
CVH
Re: Free Hatch Patterns
Posted: Sun Nov 24, 2019 6:02 am
by John Hyslop
Qcad Metric Hatch Patterns
Some Updated Patterns are now on Page 4 of this topic
Re: Free Hatch Patterns
Posted: Sun Nov 24, 2019 6:56 am
by John Hyslop
MAZE-02 Seamless in Imperial... Metric File to Follow
Re: Free Hatch Patterns
Posted: Sun Nov 24, 2019 6:56 am
by John Hyslop
MAZE-02 Seamless in Metric
Re: Free Hatch Patterns
Posted: Thu Nov 28, 2019 8:30 am
by John Hyslop
Hatch Patterns BOXJOIN-01,BOXJOIN-02,HEXJOIN-01,HEXJOIN-02
Metric & Imperial Downloads
Re: Free Hatch Patterns
Posted: Thu Nov 28, 2019 9:07 am
by John Hyslop
LATTICE-05 & LATTICE-06
In Metric & Imperial
Re: Free Hatch Patterns
Posted: Thu Nov 28, 2019 11:20 am
by John Hyslop
Australian REDBACK Spider
Re: Free Hatch Patterns
Posted: Sat Dec 14, 2019 9:35 am
by John Hyslop
TRIANGLE & BOX OVERLAP PATTERNS in Metric & Imperial
Re: Free Hatch Patterns
Posted: Sat Dec 14, 2019 7:11 pm
by CVH
John Hyslop wrote: ↑Wed Nov 20, 2019 10:51 pm
LATTICE-04 [ see angle note on screenshot ] to make it orthogonal..
If you require a more accurate angle the true one is 26.565051deg :-)
And the not turncated angle would be:
ATAN2(2,1)
Do you see it John? :D
Tiles2Patterns...Closing in on it.
Cheers
CVH
Re: Free Hatch Patterns
Posted: Sat Dec 14, 2019 10:06 pm
by John Hyslop
Hi CVH
I private messaged you to keep this area clear for hatch patterns..
Cheers john
Re: Free Hatch Patterns
Posted: Sun Dec 15, 2019 3:57 am
by John Hyslop
SCAFFOLD PATTERN HAS BEEN UPDATED, PLEASE SEE POST DATED 11/01/20
This Pattern might be handy for builders and architects.
Note: if your drawing is scaled 1:1 Consider setting a high scale
eg. 200 then adjust it to get the approximate size..
Scaled at 200 will result in the platform sizes below:-
Metric = 2540mm Long
Inch = 100" Long
This Pattern is not intended to be an accurate way of drawing
scaffolding , it is for quick representational purposes only
Metric & Imperial Files Included....
Cheers
John
Re: Free Hatch Patterns
Posted: Tue Dec 17, 2019 4:41 am
by John Hyslop
Here's another 2 Hatch Patterns BLOCKS-01 & BLOCKS-02 in Metric & Inch
These could be exploded and used as garden screens cut from corten
steel " steel that naturally rusts " some of my other patterns can
be used for this purpose also eg some of the Lattice patterns..
Re: Free Hatch Patterns
Posted: Tue Dec 17, 2019 5:32 am
by John Hyslop
XMASTREE PATTERNS Metric & Imperial