Free Hatch Patterns

Discussion forum for C++ and script developers who are using the QCAD development platform or who are looking to contribute to QCAD (translations, documentation, etc).

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Attach drawing files, scripts and screenshots.

Post one question per topic.

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sat Nov 23, 2019 3:00 am

Hi All
I've added headers to all my hatch patterns the header contains this text as suggested by CVH :-)
;By John Hyslop
;Developed in inch as imperial QCAD3 pattern
Here is a fullset of all I have done so far if using Metric download the metric set.. Enjoy :-)
The Dotted Circle Hatches are made with short lines.. not the best practice but ok for representations..
Some Pattern Updates are now on Page 4 of this topic
Attachments
Set of 15-Hatch-Patterns.zip
(13.25 KiB) Downloaded 608 times
15 Qcad Imperial Hatch Patterns.jpg
15 Qcad Imperial Hatch Patterns.jpg (197.43 KiB) Viewed 19437 times
Last edited by John Hyslop on Wed Jan 29, 2020 9:51 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sat Nov 23, 2019 6:22 am

Seamless MAZE-02 Coming soon 👌
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

CVH
Premier Member
Posts: 3416
Joined: Wed Sep 27, 2017 4:17 pm

Re: Free Hatch Patterns

Post by CVH » Sat Nov 23, 2019 2:23 pm

Forgot the LATTICE-04 Ortho....

You can use 0 (zero) for dashes 1-6 instead of a positive number.
That would render to a dot.
Positive is the length ON.
Negative is the length OFF.

dashes 5,-3,0,-1,0,-1 would be:
bar(5long), space(3), dot, space(1), dot, space(1)

Regards,
CVH

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sun Nov 24, 2019 6:02 am

Qcad Metric Hatch Patterns
Some Updated Patterns are now on Page 4 of this topic
Attachments
Set of 15-Hatch-Patterns [ METRIC ].zip
(15.19 KiB) Downloaded 586 times
Qcad Metric Hatch Patterns.jpg
Qcad Metric Hatch Patterns.jpg (205.94 KiB) Viewed 19380 times
Last edited by John Hyslop on Wed Jan 29, 2020 9:52 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sun Nov 24, 2019 6:56 am

MAZE-02 Seamless in Imperial... Metric File to Follow
Attachments
MAZE-02.pat
(1.24 KiB) Downloaded 580 times
MAZE-02.jpg
MAZE-02.jpg (66.24 KiB) Viewed 19377 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sun Nov 24, 2019 6:56 am

MAZE-02 Seamless in Metric
Attachments
MAZE-02.pat
(1.54 KiB) Downloaded 589 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Thu Nov 28, 2019 8:30 am

Hatch Patterns BOXJOIN-01,BOXJOIN-02,HEXJOIN-01,HEXJOIN-02
Metric & Imperial Downloads
Attachments
BOXJOIN-HEXJOIN-01-02-Metric.zip
(1.33 KiB) Downloaded 590 times
BOXJOIN-HEXJOIN-01-02-Imperial.zip
(1.23 KiB) Downloaded 580 times
HEXJOIN - BOXJOIN - 01 - 02.jpg
HEXJOIN - BOXJOIN - 01 - 02.jpg (96.59 KiB) Viewed 19332 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Thu Nov 28, 2019 9:07 am

LATTICE-05 & LATTICE-06
In Metric & Imperial
Attachments
LATTICE-05-06-Metric.zip
(699 Bytes) Downloaded 586 times
LATTICE-05-06-Imperial.zip
(625 Bytes) Downloaded 579 times
LATTICE-05 and LATTICE-06.jpg
LATTICE-05 and LATTICE-06.jpg (67.12 KiB) Viewed 19331 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Thu Nov 28, 2019 11:20 am

Australian REDBACK Spider
Attachments
REDBACK - Metric and Imperial.zip
(4.52 KiB) Downloaded 578 times
RedBack - Spider.jpg
RedBack - Spider.jpg (63.08 KiB) Viewed 19324 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sat Dec 14, 2019 9:35 am

TRIANGLE & BOX OVERLAP PATTERNS in Metric & Imperial
Attachments
TRI-BOX-OVERLAP - Metric.zip
(784 Bytes) Downloaded 585 times
TRI-BOX-OVERLAP - Inch.zip
(712 Bytes) Downloaded 583 times
TRI-BOX-OVERLAP.jpg
TRI-BOX-OVERLAP.jpg (64.86 KiB) Viewed 19133 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

CVH
Premier Member
Posts: 3416
Joined: Wed Sep 27, 2017 4:17 pm

Re: Free Hatch Patterns

Post by CVH » Sat Dec 14, 2019 7:11 pm

John Hyslop wrote:
Wed Nov 20, 2019 10:51 pm
LATTICE-04 [ see angle note on screenshot ] to make it orthogonal..
If you require a more accurate angle the true one is 26.565051deg :-)
And the not turncated angle would be:
ATAN2(2,1)

Do you see it John? :D
Tiles2Patterns...Closing in on it.

Cheers
CVH

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sat Dec 14, 2019 10:06 pm

Hi CVH
I private messaged you to keep this area clear for hatch patterns..
Cheers john
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Sun Dec 15, 2019 3:57 am

SCAFFOLD PATTERN HAS BEEN UPDATED, PLEASE SEE POST DATED 11/01/20

This Pattern might be handy for builders and architects.
Note: if your drawing is scaled 1:1 Consider setting a high scale
eg. 200 then adjust it to get the approximate size..
Scaled at 200 will result in the platform sizes below:-
Metric = 2540mm Long
Inch = 100" Long

This Pattern is not intended to be an accurate way of drawing
scaffolding , it is for quick representational purposes only :-)

Metric & Imperial Files Included....

Cheers
John
Attachments
SCAFFOLD-PATTERNS - mm and inch.zip
(1.45 KiB) Downloaded 520 times
SCAFFOLD-PATTERN.jpg
SCAFFOLD-PATTERN.jpg (138.82 KiB) Viewed 19104 times
Last edited by John Hyslop on Sat Jan 11, 2020 7:17 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Tue Dec 17, 2019 4:41 am

Here's another 2 Hatch Patterns BLOCKS-01 & BLOCKS-02 in Metric & Inch
These could be exploded and used as garden screens cut from corten
steel " steel that naturally rusts " some of my other patterns can
be used for this purpose also eg some of the Lattice patterns.. :-)
Attachments
PATTERNS - BLOCKS-01 and -02 - mm and Inch.zip
(2.38 KiB) Downloaded 458 times
BLOCKS -01 and -02.jpg
BLOCKS -01 and -02.jpg (97.61 KiB) Viewed 19057 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

John Hyslop
Premier Member
Posts: 473
Joined: Mon Sep 30, 2019 6:21 am
Location: Melbourne - Australia

Re: Free Hatch Patterns

Post by John Hyslop » Tue Dec 17, 2019 5:32 am

XMASTREE PATTERNS Metric & Imperial
Attachments
PATTERNS - XMASTREE-01 and -02 - mm and inch.zip
(3.54 KiB) Downloaded 416 times
XMASTREE-01 and -02.jpg
XMASTREE-01 and -02.jpg (173.24 KiB) Viewed 19055 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]

Post Reply

Return to “QCAD Programming, Script Programming and Contributing”