Free Hatch Patterns
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
BARBWIRE Hatch Pattern, Handy for Architechs Adding Wire to Fences
- Attachments
-
- BARBWIRE - Metric and Imperial.zip
- (2.5 KiB) Downloaded 630 times
-
- barbwire.jpg (61.31 KiB) Viewed 20692 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
WIRE-FENCE Hatch Pattern
- Attachments
-
- WIRE-FENCE - Metric and Imperial.zip
- (1.13 KiB) Downloaded 647 times
-
- WIRE-FENCE.jpg (58 KiB) Viewed 20687 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
An example of the previous Hatch Patterns in use...fill borders on Layer Invisible ...
- Attachments
-
- Basket.jpg (58.57 KiB) Viewed 20685 times
-
- FENCE.jpg (501.69 KiB) Viewed 20686 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
LOOPLINKS Hatch Pattern..This Pattern Has been Removed and Will be updated ASAP
New Updated Pattern now on Page 4 of this topic
New Updated Pattern now on Page 4 of this topic
- Attachments
-
- LOOPLINKS.jpg (109.06 KiB) Viewed 20683 times
Last edited by John Hyslop on Wed Jan 29, 2020 11:33 am, edited 5 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Hi Andrew
I noticed in Qcad 3.24 that small lines are rendered as points, this is good but I had to redo LATTICE-02.PAT
manually as it had a Zero on the end of 2 lines, I've commented in PAT files where... if the current Pattern
File is Exploded it shows these points and sometimes even if not exploded also shows them slightly.... anyway
here are the updated Files please just write over the older ones..see what I mean by points in image below..
I noticed in Qcad 3.24 that small lines are rendered as points, this is good but I had to redo LATTICE-02.PAT
manually as it had a Zero on the end of 2 lines, I've commented in PAT files where... if the current Pattern
File is Exploded it shows these points and sometimes even if not exploded also shows them slightly.... anyway
here are the updated Files please just write over the older ones..see what I mean by points in image below..
- Attachments
-
- Fixed Lattice-02 Pattern.jpg (16.69 KiB) Viewed 20650 times
-
- Lattice-02 - Points.jpg (19.59 KiB) Viewed 20651 times
-
- LATTICE-02 - Imperial and Metric Updated.zip
- (595 Bytes) Downloaded 612 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Hi All
I'm Currently Testing out this tool "Tile2Hatch tool © CVH 2020" It seems to work flawlessly even at testing stage so
I'm posting all my patterns now using this tool as the AutoCad one has a lot of limitations... all header files will
contain this message to credit CVH on his amazing work on this tool that runs in Qcad
*HATCHNAME
;By John Hyslop, Tile2Hatch tool © CVH 2020
;Developed in inch as imperial QCAD3 pattern
AND
*HATCHNAME
;By John Hyslop, Tile2Hatch tool © CVH 2020
;Developed in mm as metric QCAD3 pattern
I'm Currently Testing out this tool "Tile2Hatch tool © CVH 2020" It seems to work flawlessly even at testing stage so
I'm posting all my patterns now using this tool as the AutoCad one has a lot of limitations... all header files will
contain this message to credit CVH on his amazing work on this tool that runs in Qcad
*HATCHNAME
;By John Hyslop, Tile2Hatch tool © CVH 2020
;Developed in inch as imperial QCAD3 pattern
AND
*HATCHNAME
;By John Hyslop, Tile2Hatch tool © CVH 2020
;Developed in mm as metric QCAD3 pattern
Last edited by John Hyslop on Sun Jan 05, 2020 7:01 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Files Attached In Imperial and Metric
BUBBLES-01,BUBBLES-02, LEAF-01 and LEAF-02..
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
New Updated Patterns now on Page 4 of this topic
BUBBLES-01,BUBBLES-02, LEAF-01 and LEAF-02..
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
New Updated Patterns now on Page 4 of this topic
- Attachments
-
- Bubbles-01 and 02.jpg (84.55 KiB) Viewed 20565 times
-
- Leaf -01 and -02 Patterns.jpg (120.3 KiB) Viewed 20571 times
Last edited by John Hyslop on Wed Jan 29, 2020 9:54 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
HATCH-DOTS and HATCH-SQRS in Metric and Imperial
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
- Attachments
-
- HATCH-DOTS - HATCH-SQRS - Metric and Imperial.zip
- (1.65 KiB) Downloaded 610 times
-
- HATCH-DOTS-SQRS.jpg (130.81 KiB) Viewed 20545 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Optimised Patterns Please replace older patterns with these ones
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
Patterns Will be updated ASAP
SCAFFOLD PATTERN HAS BEEN UPDATED, PLEASE SEE POST DATED 11/01/20
SQUIGGLE-01 & SQUIGGLE-02 Have been updated and can be found on page 4 of this topic
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
Patterns Will be updated ASAP
SCAFFOLD PATTERN HAS BEEN UPDATED, PLEASE SEE POST DATED 11/01/20
SQUIGGLE-01 & SQUIGGLE-02 Have been updated and can be found on page 4 of this topic
- Attachments
-
- Optimised Patterns.jpg (206.8 KiB) Viewed 20515 times
Last edited by John Hyslop on Wed Jan 29, 2020 9:55 am, edited 4 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
LEAF-03 PATTERN
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
Pattern Will be updated ASAP
New Updated Pattern now on Page 4 of this topic
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
Pattern Will be updated ASAP
New Updated Pattern now on Page 4 of this topic
- Attachments
-
- LEAF-03.jpg (132.66 KiB) Viewed 20461 times
Last edited by John Hyslop on Wed Jan 29, 2020 11:33 am, edited 3 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
LATTICE-07 Pattern [ Similar to LATTICE-02, but woven instead of overlapped ]
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
.
You Can Also Create This With My Free Basic Hatch Tool, That Can Be Downloaded Using The Link Below..
.
https://www.qcad.org/rsforum/viewtopic. ... =15#p33566
.
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
.
You Can Also Create This With My Free Basic Hatch Tool, That Can Be Downloaded Using The Link Below..
.
https://www.qcad.org/rsforum/viewtopic. ... =15#p33566
.
- Attachments
-
- LATTICE-07.jpg (85.78 KiB) Viewed 20427 times
-
- LATTICE-07 - Metric and Imperial.zip
- (666 Bytes) Downloaded 604 times
Last edited by John Hyslop on Sun Nov 28, 2021 11:01 am, edited 1 time in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
WEAVING Pattern
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
WARNING This uses a lot of resources use wisely
Pattern Will be updated ASAP
New Updated Pattern now on Page 4 of this topic
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
WARNING This uses a lot of resources use wisely
Pattern Will be updated ASAP
New Updated Pattern now on Page 4 of this topic
- Attachments
-
- WEAVING.jpg (202.24 KiB) Viewed 20425 times
Last edited by John Hyslop on Wed Jan 29, 2020 9:56 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
UPDATE TO SCAFFOLD PATTERN
DUPLICATE LINE REMOVED - 11-01-20
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
DUPLICATE LINE REMOVED - 11-01-20
Using Tool Developed by CVH "Tile2Hatch tool © CVH 2020"
- Attachments
-
- SCAFFOLD - Metric and Imperial.zip
- (1.38 KiB) Downloaded 598 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Hi All
As you are all aware CVH discovered that some hatch patterns when hatched far away from the drawings X Y Origin start to lose accuracy , this is due to the limitation of the number of decimal points used to calculate entity positions at that distance. Although it's not the norm to hatch at such distances, we have come up with a workaround if needed, simply click on the pattern that has lost it's definition and reset the hatch origin... see screenshot below. I will be reinstating the patterns I removed recently as we now know what is causing this...
The Installed AR-CONC.PAT does exactly the same thing and that's been around for years
As you are all aware CVH discovered that some hatch patterns when hatched far away from the drawings X Y Origin start to lose accuracy , this is due to the limitation of the number of decimal points used to calculate entity positions at that distance. Although it's not the norm to hatch at such distances, we have come up with a workaround if needed, simply click on the pattern that has lost it's definition and reset the hatch origin... see screenshot below. I will be reinstating the patterns I removed recently as we now know what is causing this...
The Installed AR-CONC.PAT does exactly the same thing and that's been around for years
- Attachments
-
- Drifting Hatch Patterns.jpg (158.11 KiB) Viewed 20160 times
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
New Updated Patterns now on Page 4 of this topic, The QCAD-LOGO was kindly fixed up by CVH , he edited 1 line of the code that was making 1 side of the pencil shift...dramatically [/size][/b]
Last edited by John Hyslop on Wed Jan 29, 2020 9:58 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]