3 axis VMC and wire EDM
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Registered Member
- Posts: 2
- Joined: Sun Jan 17, 2021 2:55 pm
3 axis VMC and wire EDM
Hello - I am a CNC programmer and have been primarily using MasterCAM for programming 3 axis VMCs doing progressive die detail work. In a few months I will be moving to a very small family run shop where purchasing a MasterCAM license is not feasible. Would QCAM be suitable for simple 3 axis mill programming and holemaking on a CNC wire edm? I understand this software probably doesn't offer HEM or 3D form, but at this shop that won't be necessary. Thanks for any input!
Re: 3 axis VMC and wire EDM
Hello,
Please refer to our QCAD/CAM tutorial at:
https://qcad.org/en/tutorial-qcad-cam
This should give you a pretty good idea about what is feasible with QCAD/CAM and what not. Don't hesitate to post back if you have any further questions or example files or screenshots.
Please refer to our QCAD/CAM tutorial at:
https://qcad.org/en/tutorial-qcad-cam
This should give you a pretty good idea about what is feasible with QCAD/CAM and what not. Don't hesitate to post back if you have any further questions or example files or screenshots.
-
- Registered Member
- Posts: 2
- Joined: Sun Jan 17, 2021 2:55 pm
Re: 3 axis VMC and wire EDM
Thank you! I see the tutorial shows profile cutting and allows for cutter compensation.. this should definitely work for a wire EDM, but will the software post canned cycles for drilling and tapping, pockets, etc? Is that something I would need to manually add in to the post processor?
Re: 3 axis VMC and wire EDM
Pockets could be realized using the offset tool as described here:
viewtopic.php?&t=5411
Drilling toolpaths are possible, also with multiple passes.
viewtopic.php?&t=5411
Drilling toolpaths are possible, also with multiple passes.