|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2421 | QCAD (main) | Feature Request | Low | Make the preview of Shorten (LE) more visible | Assigned | |
1 |
Task Description
Andrew,
When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity. With a negative amount there is seemingly no preview. It is generated and shown but one can not distinguish it especially with solid lines.
Adding an orthogonal auxiliary preview shape some N pixels long would do the trick.
Regards, CVH
|
|
2478 | QCAD (main) | Feature Request | Low | Make RMathLineEdit unit aware | Assigned | |
1 |
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094
When entering 1’ 1’‘ in an input field. - As the size of the rectangle in the topic - As the length property of a line selected in the drawing - ....
Returns 13 in a drawing in mm. And also in a drawing in inch what turns out to be correct. But also in a drawing in foot.
Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.
Regards, CVH
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
849 | QCAD (main) | Feature Request | Low | Make maximum visible reference points of selection conf... | Assigned | |
1 |
Task Description
Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).
Original report:
Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.
I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger
regards
Benjamin
|
|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
764 | QCAD (main) | Feature Request | Low | Links to Data sheet, Part List ... | Assigned | |
1 |
Task Description
Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.
It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing. Like the bitmap function without displaying the files in the drawing ...
|
|
1837 | QCAD (main) | Feature Request | Low | Line bisector tool | Assigned | |
1 |
Task Description
Hi,
we have already this nice tool “Angle bisector”.
I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.
Thanks.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
1 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
2452 | QCAD (main) | Feature Request | Very Low | Keyboard Shortcut for Undo Last Point While Drawing Spl... | Assigned | |
1 |
Task Description
Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
2293 | QCAD (main) | Feature Request | Low | insert attributes into a point element | Assigned | |
1 |
Task Description
Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.
|
|
1287 | QCAD (main) | Feature Request | Low | Information tool shows absolute units in print preview | Assigned | |
1 |
Task Description
With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units. So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.
See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
703 | QCAD (main) | Feature Request | Low | Info function -> contour for Hatch not closed ... | Assigned | |
1 |
Task Description
Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!
But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.
If I have to zoom into the Problem - I will lose the Info where the problem is
To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............
It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.
And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)
|
|
2505 | QCAD (main) | Feature Request | Very Low | Info > Polygonal Area > Use dimension decimal format fo... | Assigned | |
1 |
Task Description
Andrew, On behalf of user Kmeelo
Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.
Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805
Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458
I also see a misconception of the term ‘precision’. Numbers precision is the amount of significant digits disregarding the position of the decimal point. 12 decimal digits is about the largest precision for numbers with 5 integer digits.
Regards, CVH
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
2440 | QCAD (main) | Bug Report | Very Low | Hatch from Segments > False positives open loop warning... | Assigned | |
1 |
Task Description
Andrew,
Most probably not related to OS or QCAD version.
When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops. It seems that this is related to the orientation of the indicated segments and the order of selection. The real problematic position is not always the first that is reported. Loop count is increased even if it is a single loop.
Included a basic test drawing to replicate these. Further details to replicate the issue are in the file.
Regards, CVH
|
|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
1 |
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
2446 | QCAD (main) | Feature Request | Low | Extending dimension line beyond extension line when usi... | Assigned | |
1 |
Task Description
I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|
|
173 | QCAD (main) | Feature Request | Low | explode text to letters | Assigned | |
1 |
Task Description
implement
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
798 | QCAD (main) | Feature Request | Low | elaborate on purge tool | Assigned | |
1 |
Task Description
Modify the “purge layer” tool to preserve empty layers with a locked status. see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386
|
|
1298 | QCAD (main) | Feature Request | Low | Drawing Preference; File format | Assigned | |
1 |
Task Description
Hi, I get anoyed everytime saving a drawing;
File Format not recommended....... [Yes] ; I know. it's suppose to be in that format!
Saving to file...... [OK] ; I already told you
Black entities ......bla bla [OK] ; I already told you
Custom colors ...... bla bla [OK] ; I already told you
Therefore, Drawing Preferences should start with the file format choice field;
File Format: R.......
Drawing should be opened and saved in that format without any question. Please.
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|