|
1598 | QCAD (main) | Bug Report | Low | Open In The Browser doesn't work | Closed | |
|
Task Description
The option “open in the browser” in the “library browser” doesn’t work on Linux Mint 18.2 (KDE) whose default browser is Dolphin.
|
|
1600 | QCAD (main) | Bug Report | Low | File > Save As: Only partial information shown for avai ... | Closed | |
|
Task Description
Some Linux distributions only show filter strings up to the first “(” in the file dialog.
|
|
1601 | QCAD (main) | Feature Request | Low | Add regex to text search & replace | Assigned | |
|
Task Description
Add a more versatile way of doing a search and replace for text. Regular expressions maybe?
|
|
1603 | QCAD (main) | Feature Request | Low | Curved leader Lines | Closed | |
|
Task Description
Hi Andrew,
I would like to request an additional option in the dimension tool set to have a curved leader line, could be just the spline tool with an arrow on the end?
Regards
Clive
|
|
1604 | QCAD (main) | Bug Report | Low | Exploding splines has equal results disregarding the s ... | Closed | |
|
Task Description
The explode function preference ‘Spline Segments’ has no influence on the created number of polyline segments any more.
Attached is a file with an example. The same spline exploded with setting 2-4-8 & 128 segments. Result for the indicated spline is 59 and constant.
|
|
1606 | QCAD (main) | Performance Issue | Low | Selecting 'Draw Order' halts system temporary | Closed | |
|
Task Description
Merely clicking on ‘Draw Order’, and usualy unintended, halts the system for several seconds up to several tens of seconds.
Intel(R) Core(TM) i7-2600K CPU @ 3.40Ghz 4,00 GB RAM installed 3,49 GB usable 32-bit Operating System Windows 7 Professional SP1
|
|
1609 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: dimension size scale cannot ... | Closed | |
|
Task Description
Load “Bemassung.dxf” Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor: set to 1 Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor reverts to 0.5
See: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926&start=15#p18229
|
|
1610 | QCAD/CAM | Performance Issue | Low | Switching from one drawing to another slow | Closed | |
|
Task Description
When switching from one drawing to another, the 3D view is updated which can be slow, especially for drawings with many text entities.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4945
|
|
1611 | QCAD (main) | Feature Request | Low | Cabinet projection at 30 degree also | Closed | |
|
Task Description
Hi Andrew,
Cabinet projections are usually drawn at 45 or 30 degrees, having drawn up many furniture configurations over the years, would it be possible to add options for 45 and 30 degrees at all?
Regards
Clive
|
|
1612 | QCAD (main) | Feature Request | Low | Multi - Lengthen / Shorten Tool | Closed | |
|
Task Description
To have an option added to the lengthen / Shorten tool to be able to select more than one entity and do a ‘multi’ lengthen / shorten operation.
|
|
1614 | QCAD (main) | Bug Report | Low | View > Selection Filter: no choices for linetype proper ... | Closed | |
|
Task Description
Good morning, i’m using italian version of QCAD. I’m very satisfied about it. But the filter selection do not work if you want to select by linetype. I can not fill the last field requested with the line type. Other filters for example color works well. I’m sorry for my little english , i hope you will understand me. Thanks a lot.
|
|
1615 | QCAD (main) | Bug Report | Low | Decimal point of dimensions shown as '?', preferences p ... | Closed | |
|
Task Description
First. I am not able to find OS selection for macOS Sierra so I choose Mac OS X. I noticed that when I opened my drawing, I saw dimensions on drawing showed ‘156?6’ instead of ‘156.6’ in prior version I had installed. Probably in 3.16.5
So I opened Dimension Settings page to review and found when opening Dimension Settings under Drawing Preferences, Dimension Settings does not show. It remains blank.
Then I clicked on other settings menu item from left and clicked back on the Dimension Settings I was able to see the Dimension setting. However; when I closed the dialog and try to open the Dimension Settings again, I am not able to see the settings page at all. Just blank. I can see other settings page fine.
One time when I was able to see the Dimension Setting, I noticed that the Separator symbol was blank. So I updated that to ‘.’ and hit OK. The drawing still shows ‘156?6’ instead of expected ‘156.6’.
It seems the separator symbol is not being saved for some reason.
|
|
1616 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: leader arrow switched off | Closed | |
|
Task Description
Case: Existing Leader with Arrow status “yes” in drawing, launch “Convert Drawing Unit”, convert drawing unit, Leader status for Arrow “yes” is now changed to “no”,
|
|
1617 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: Views in view list not con ... | Closed | |
|
Task Description
Case: Drawing in mm with Entries in the View List, Convert (CU) drawing from mm to inch, View List still exist but has lost the coordinates for each defined window,
|
|
1618 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: fails when extending (depending on ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4984
|
|
1619 | QCAD (main) | Bug Report | Low | Context menu: relocating start point of selected polyli ... | Closed | |
|
Task Description
Select a polyline Right click on it to show context menu Set new position of start point Tool stays active and does not properly terminate
|
|
1620 | QCAD (main) | Feature Request | Low | Layer Lineweight Default in Application Settings | Closed | |
|
Task Description
Application Setting to set line weight setting on Layer 0 to a value (Default for example). Currently Layer 0 set to 0.25mm (ISO) New drawings will have Layer 0 set to this “default” line weight. Works for addition of new layers, but not initial Layer 0 on New drawing?
|
|
1621 | QCAD (main) | Feature Request | Low | New Drawings in Draft Mode | Assigned | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001
|
|
1622 | QCAD (main) | Bug Report | Low | X Scale Property lost for Simple Texts and Attributes | Closed | |
|
Task Description
The X scale of block attributes, (and simple text) is not being saved with the drawing. This problem was fixed for a while, but has re-appeared lately.
|
|
1623 | QCAD (main) | Feature Request | Low | dwg2maptiles: specify single zoom level to generate | Closed | |
|
Task Description
Add command line argument to generate only one specific zoom level or a range of zoom levels.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005
|
|
1624 | QCAD (main) | Feature Request | Low | dwg2maptiles: specify single tile to generate | Closed | |
|
Task Description
Add command line argument to generate only one specific tile for a specific zoom level.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005
|
|
1625 | QCAD (main) | Feature Request | Low | Copy Layer | Closed | |
|
Task Description
Hi,
often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.
Example:
Existing Layer
Layer name: Lot 47 area existing
Attributes
Color: Red
Lineweight: 0.35
Linetype: Dashed
New Layer
Layer name: Lot 47 area proposal
Attributes
Color: Blue
Lineweight: 0.35
Linetype: Dashed
Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” ....
The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...
A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.
I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing. The new Layer itself is “empty” like any other new Layer.
|
|
1629 | QCAD (main) | Feature Request | Low | Add additional Option to Angelur DIM Tool | Assigned | |
|
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1630 | QCAD (main) | Bug Report | Low | File > SVG Export: polylines with arc segments with lar ... | Closed | |
|
Task Description
Polylines with arc segments with large radii are not exported correctly due to imprecise QPainterPath::addArc.
|
|
1631 | dxflib | Bug Report | Low | dxflib: wrong definition of DL_POLYLINE3D flag | Closed | |
|
Task Description
DL_POLYLINE3D should be 0×8.
|
|
1632 | QCAD (main) | Feature Request | Low | Option to add bespoke dimension precision + tolerance s... | Assigned | |
|
Task Description
Hi Andrew,
1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?
2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?
Many thanks
Clive
|
|
1633 | Themes | Bug Report | Low | Scrollbar in dark theme | Closed | |
|
Task Description
The scrollbar in the dark theme remains visible when there are many levels. For example, it blocks some operations such as unlocking or blocking individual levels after you have blocked all levels.
|
|
1634 | QCAD (main) | Bug Report | Low | View > Screen-based Linetypes: arc rendering quality | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5086
|
|
1635 | QCAD (main) | Bug Report | Low | Print current view / Portrait | Closed | |
|
Task Description
Hi,
if I use the “Print current view” tool for a Landscape format - everything works just nicely! If I use it for a Portrait print - the scale is way of.
For this example I used a rectangle as reference. The details what I’m looking for are captured with same sized red rectangles. The Paper orientation was changed before I used the Print command. To have the maximum view I select the rectangle and used “Zoom to selection” - then Print to current view.
Portrait, scale way of: Husky-2017.09.25-03.png
Portrait, manual adjusted - it should look close to this one: Husky-2017.09.25-04.png
I attache for testing the dxf too.
|
|
1636 | QCAD (main) | Bug Report | Low | Options toolbar: wrong icon size | Closed | |
|
Task Description
I have an UI icon size inconsistency : Please see the attached image I set my Edit > Application preferences > Toolbars > Icon Size to 16 px
|
|
1638 | QCAD (main) | Bug Report | Low | SansNS.cxf coding mismatch | Closed | |
|
Task Description
Some 50 glyphs in SansNS.cxf start with [#.... instead of [.... These glyphs are replaced by a ? when used. Merely removing the # fixes this. Corrected file included.
|
|
1639 | QCAD Community Edition | Bug Report | Low | Layer > Hide all Layers: cannot turn individual layer b ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=76&t=5092
|
|
1640 | QCAD (main) | Bug Report | Low | Modify > Offset: Tolerance issue when clipping offset c ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=91&t=5089
|
|
1641 | QCAD (main) | Bug Report | Low | HATCH COMMAND | Closed | |
|
Task Description
Hatch is not working !
|
|
1642 | QCAD (main) | Bug Report | Low | Selection Filter / Line / Continuous | Closed | |
|
Task Description
The Selection Filter doesn’t works proper with a Line / Continuous combination. Example drawing has Linetype by Layer and not by Layer
Filter Entity type: Line Property: Linetype Comparison: = (is) Value: Continuous
... doesn’t finds what I have ask for. Husky-2017.10.05-04.png
Filter Entity type: Line Property: Linetype Comparison: ≠ (is not) Value: Continuous
... finds more than that what I have ask for. Husky-2017.10.05-03
|
|
1643 | ECMAScript | Feature Request | Low | Modify > Explode: make drawing order predictable | Closed | |
|
Task Description
Usecase: Multiple entities ( for example polylines ) get exploded...
BUG: the exploded lines have all the same drawing ids the old entities had, a consequence of this is that when one explodes and then exports to dxf file the line order get’s scrambled wildly the exported order is “random”!
SUGGESTED FIX: sort the selected entities by their id first then after copying attributes ⇒ also set the order of the elements to the default order ! ( see fix in sourcecode attached )
|
|
1645 | QCAD (main) | Feature Request | Low | Add warning when opening file with 3D content | Assigned | |
|
Task Description
Hi.
I’m working currently a lot with files coming from rhino. Qcad can open them properly any also most operations on them work as usual - except the selection methods.
box select from upper left to lower right works as usual. double click to select all connected entities is broken. (only one entity is selected). box select from lower right to upper left does not select entities touching the selection box. (nothing is selected)
on mac os nothing is selectable with single click. on linux single click sometimes fails (nothing is selected after clicking on a line).
thanks for looking into this :)
Martin
|
|
1647 | QCAD (main) | Feature Request | Low | Add point / dot option for leaders | Assigned | |
|
Task Description
Hi Andrew,
Hopefully you might be able to squeeze this one around your busy schedule.
Would it be possible to add in the property editor an option to change a dimension arrow to a point / filled dot and maybe also a tick?
I see you are working on some viewport stuff, I am very much looking forward to testing some of this out ;).
Many thanks
Clive
|
|
1650 | QCAD (main) | Feature Request | Low | Option to remember / configure specific folder to save ... | Closed | |
|
Task Description
Option to remember / configure specific folder to save to when creating a library block.
Currently every time I want to create a library item I have to navigate to where I want to save the block - unless this is a bug and not working properly? I set the library path and re-started QCAD, but it doesn’t seem to work for me now!
|
|
1651 | QCAD (main) | Feature Request | Low | Change thickness of arch tick for dimensioning | Assigned | |
|
Task Description
An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.
|
|
1652 | QCAD (main) | Bug Report | Low | Insert file as block: block attributes not on correct b ... | Closed | |
|
Task Description
- Insert a block with block attribute definitions from a file (drag and drop or part library) into a new drawing into a layout block or another block that is not the model space block. - Attributes that are created for the attribute definitions end up in model space instead of the correct block.
|
|
1653 | QCAD (main) | Bug Report | Low | Dimension font configuration only loaded if drawing con ... | Closed | |
|
Task Description
This bugs me since a long time but I wasn’t able to reproduce it ..... till now!
My Dim Label font for new drawings (Application Preferences) is set to “Helvetica-Bold” Basically it was working just fine for new drawings but from time to time, after saving and reopen my drawing, the font was lost and replaced by “Standard”. No idea why!
Today I was playing with the new QCAD Feature “Default Template” and learned that I loose all the time my preselected font. QCAD ignores that my Template “Drawing Preferences” and also the “Application Preferences” are set to “Helvetica-Bold”. It will be replaced by “Standard”. Annoying!
Ok, question was why it doesn’t happened with all drawings, all the time? After many tests .... The “old” blank Template opens with the correct font setting. If I use a Dim in the drawing and save it everything works as expected. If I save the drawing without a Dim in it then the preselected Font will be replaced by “Standard”. It happens also if I delete all Dims in a so far proper working drawing - save and reopen it leads to the same issue. The Font will be replaced by “Standard”.
The new feature “your own Default Template” will not work regarding the Dim Label font in any cases - the template itself needs at least one Dim in the drawing to keep the desired Font.
|
|
1654 | QCAD (main) | Feature Request | Low | Edit > Convert Drawing Unit: convert viewports | Closed | |
|
Task Description
Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.
|
|
1655 | QCAD (main) | Bug Report | Low | File > Print Preview: cannot adjust page preferences fo ... | Closed | |
|
Task Description
Open Drawing Switch to model space File > Print Preview Edit > Drawing Preferences > Printing > Page: change paper size, scale, etc. Preferences cannot be applied to model space
|
|
1656 | QCAD (main) | Bug Report | Low | Dimension size scale wrong in viewports | Closed | |
|
Task Description
Dimensions in viewports do not reflect the configured Edit > Application Preferences > Dimension > Dimension Settings > Size scale factor if value != 1.
|
|
1661 | QCAD (main) | Bug Report | Low | Viewport rotation issue | Closed | |
|
Task Description
Case:
1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block = scale and rotation works as expected.
2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,
change scale setting = works as expected on view and frame,
change rotation = works on view BUT NOT ON VIEWPORT FRAME.
|
|
1662 | QCAD (main) | Performance Issue | Low | Select > Select Contour: slow for complex drawings | Closed | |
|
Task Description
Hi!
when working with files containing many not connected elements (non-poly-line elements) a double click can cause a coffee-break easily. The search for connected entities easily takes over 5 minutes on an up to date machine ([email protected]) with files that are pretty standard in size (2 or 3 MB file size ascii dxf). Adding an interruption-method would be suitable (for example by pressing escape).
attached a file with a polyline of 13000 entities and a second file with just everything duplicated. When exploding the polyline and double clicking an element it takes quite a while until all elements are selected. (this is not an extreme example, I had sometimes 10 minutes of waiting with slightly bigger files, accidently double clicking something).
also an improved algorithm for the search would help to speed up the selection. (e.g. divide the area in smaller parts, do the search there, or an option to search only in the visible view port of the document)
Martin
|
|
1664 | QCAD (main) | Bug Report | Low | Block > Insert Block: attribute color not synced with a ... | Closed | |
|
Task Description
1. Create new block 2. Edit block 3. Block > Attributes > Define Block Attribute 4. Use property editor to change color of this attribute definition to fixed color 5. Insert block into model space 6. Color of attribute is “By Layer” instead of fixed color
|
|
1665 | QCAD (main) | Bug Report | Low | Edit > Drawing / Application Preferences > Point Displa ... | Closed | |
|
Task Description
Button for point display mode 99 broken.
|
|
1666 | QCAD (main) | Feature Request | Low | Draw > Line > Relative Angle / Orthogonal: define lengt... | Assigned | |
|
Task Description
Add option to define length (end point) using mouse pointer.
If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205
|