|
926 | QCAD (main) | Feature Request | Low | Splines: break up at point | Closed | |
|
Task Description
Break up spline at given point, break out segment, etc.
|
|
925 | QCAD (main) | Bug Report | Low | Attribute definitions duplicated when loaded from DWG | Closed | |
|
Task Description
Title says it all. Cannot get QCAD to synchronise attributes on Fedora 19 box with QCAD 3.2.2 installed as the machine hangs (a single core of CPU maxed out). This is not present on my Windows machine (Windwows 7).
I can provide a sample file privately if needed.
Kurt
|
|
924 | QCAD (main) | Bug Report | Low | Printing under Linux: printing continues after cancelli ... | Closed | |
|
Task Description
Once the print dialog is displayed, it will print even if I “cancel” or “x” the page.
|
|
923 | QCAD (main) | Feature Request | Low | Diagramming (Intelligent Orthogonal Connectors) | Assigned | |
2 |
Task Description
Hi,
With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
921 | QCAD (main) | Bug Report | Low | File - Save As: chosen file type filter ignored under K ... | Closed | |
|
Task Description
This affects only certain KDE installations: - Fedora 12 with KDE - Kubuntu 13.04
|
|
920 | QCAD (main) | Feature Request | Low | Matrix transformations | Closed | |
|
Task Description
Add matrix transformations to projection tools.
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2569
|
|
919 | QCAD (main) | Bug Report | Low | Insert block with attributes: third attribute input not ... | Closed | |
|
Task Description
Insert block with attributes: third attribute input not working
|
|
918 | QCAD (main) | Feature Request | Low | Info tools: add measurement result permanently to drawi ... | Closed | |
|
Task Description
Add an option to measuring tools to add results permanently to the drawing (on current layer, with current layer attributes).
|
|
916 | QCAD (main) | Feature Request | Low | SVG export: make zero line width behaviour configurable | Closed | |
|
Task Description
Somewhere in the 3.1 series the SVG exporter (both precise and PG) started to make lines that are zero (0) width in CAD 0.01 (@scale 1:1) points wide in exported files (0.1 @scale 1:10). I use such lines to constrain exported files to a common size and rather not have them show. In my view, this is a regression, as there is no reason for changing line weight, isnt it? If I wanted the lines to have weight, I’d draw them with a weight.
|
|
915 | QCAD (main) | Bug Report | Low | Texts with undefined characters | Closed | |
|
Task Description
Texts in CAD fonts with characters for which no glyph is defined report a wrong bounding box which always includes the absolute zero point. This makes the spatial index ineffective for drawings containing many such texts (typically complex drawings from international users).
|
|
914 | QCAD (main) | Performance Issue | Low | Invert selection: poor performance | Closed | |
|
Task Description
Inverting the current selection is significantly slower than select all, deselect all or other selection tools.
|
|
913 | QCAD (main) | Bug Report | Low | Library browser: SVG items show no icon / cannot be ins ... | Closed | |
|
Task Description
SVG import fails if no resolution is specified for SVGImporter.
|
|
912 | QCAD (main) | Bug Report | Low | Move to back has no effect on hatches / solid fills | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=2548
|
|
911 | QCAD (main) | Bug Report | Low | Saving / loading text with accents ('é') | Closed | |
|
Task Description
Text with é turns into È.
|
|
910 | QCAD (main) | Bug Report | Low | Exploding block with attribute | Closed | |
|
Task Description
Exploding a block with attributes results in wrong exploded text (tag instead of value).
|
|
909 | QCAD (main) | Bug Report | Low | Moving paper in print preview: does not terminate | Closed | |
|
Task Description
Action to move paper in print preview does not properly terminate on right-click (paper can still be moved after right-click)
|
|
908 | QCAD (main) | Feature Request | Low | Library Browser Block Delete Function | Assigned | |
2 |
Task Description
It would be very helpful if the library browser had a delete function.
I know that this can be very risky for some people, but it is the easiest way to see clearly what you delete.
Regards Henry
|
|
907 | QCAD (main) | Bug Report | Low | I, M file dialog doesn't work as intended (with fix) | Closed | |
|
Task Description
In scripts/Draw/Image/Image.js, while building the filter for the file dialog, constructs like this are used:
var formats = QImageReader.supportedImageFormats();
for (var i=0; i<formats.length; ++i) {
var format = formats[i];
if (format==="jpg" ||
format==="tif") {
continue;
}
=== also checks for type equality, and since format is actually an object, it will never match. The result is that duplicates are not filtered from the list as the code suggests they were intended to be filtered, nor are formats that are not intended to be there.
The following patch fixes this:
diff --git a/scripts/Draw/Image/Image.js b/scripts/Draw/Image/Image.js
index 0a6400e..cc58c98 100644
--- a/scripts/Draw/Image/Image.js
+++ b/scripts/Draw/Image/Image.js
@@ -91,23 +91,23 @@ Image.prototype.getFileName = function() {
var formatAlt = "";
// ignore format aliases:
- if (format==="jpg" ||
- format==="tif") {
+ if (format=="jpg" ||
+ format=="tif") {
continue;
}
// ignore unsupported formats:
- if (format==="ico" || format==="mng" ||
- format==="pbm" || format==="pgm" || format==="ppm" ||
- format==="svg" || format==="svgz" ||
- format==="xbm" || format==="xpm") {
+ if (format=="ico" || format=="mng" ||
+ format=="pbm" || format=="pgm" || format=="ppm" ||
+ format=="svg" || format=="svgz" ||
+ format=="xbm" || format=="xpm") {
continue;
}
- if (format==="jpeg") {
+ if (format=="jpeg") {
formatAlt = "jpg";
}
- else if (format==="tiff") {
+ else if (format=="tiff") {
formatAlt = "tif";
}
|
|
906 | QCAD (main) | Bug Report | Low | Stretch: not working for hatch entities | Closed | |
|
Task Description
Stretching hatch entities results in broken hatches. Regression introduced in QCAD 3.1.5, bug still present in 3.2.2.
|
|
903 | QCAD (main) | Bug Report | Low | Cannot read POLYLINE / VERTEX entities from DXF | Closed | |
|
Task Description
Polylines that are stored with vertices as separate entities in DXF are not read by QCAD. See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=2531
|
|
902 | QCAD (main) | Bug Report | Low | Reduced font selection not working as expected | Closed | |
|
Task Description
QCAD GPL Git reba26f7a, completely new configuration (seemingly important); also happens with the binary QCAD 3.2.2 download.
I wanted to use the Standard CAD font and the Standard CAD font only. To achieve that, in Application Preferences→Draw→Text, I ticked “Use reduced selection of fonts” and hit “Uncheck all”.
My expectation is that in this case the Text tool lists only the Standard font.
What actually happens is that the “Standard” font stays disabled, is deselected, and the Text tool lists every font I have installed on my system (system-wide fonts only, TTF and whatever else), and none of the CAD fonts bundled with QCAD in fonts/ (not even Standard).
There seems to be some inconsistency in the handling of “Standard” – it is apparently meant to be selected no matter what, and its checkbox disabled so the end user isn’t even able to de-select it. What actually happens is that the Text preferences “Check all”/”Uncheck all” buttons do affect its selected state.
At this time, the saved configuration (in ~/.config/QCAD3) contains the following entries:
[Text]
ReducedFontList=@Invalid()
UseReducedFontList=true
Note that at this point the Text preferences screen indicates that the Standard entry is disabled and not selected, see fontsel-1.png
So I did the following as an experiment:
--- a/scripts/Edit/AppPreferences/TextPreferences/TextPreferences.js
+++ b/scripts/Edit/AppPreferences/TextPreferences/TextPreferences.js
@@ -58,7 +58,7 @@ TextPreferences.initPreferences = function(pageWidget, calledByPrefDialog, docum
// always check 'standard':
if (item.text().toLowerCase()==="standard") {
item.setCheckState(Qt.Checked);
- flags = new Qt.ItemFlags(item.flags() & ~Qt.ItemIsEnabled);
+ // flags = new Qt.ItemFlags(item.flags() & ~Qt.ItemIsEnabled);
}
if (list.contains(item.text())) {
item.setCheckState(Qt.Checked);
At this point, the Text preferences screen has the “Standard” font enabled and still not selected, see fontsel-2.png
The saved configuration file still contains an invalid entry for the font list:
[Text]
ReducedFontList=@Invalid()
UseReducedFontList=true
(This is probably is as intended, since the list is not supposed to be empty, but it really is now.)
Now let’s select “Standard” in the Text preferences screen, Apply, and undo the above change to TextPreferences.js.
At this point, the configuration file contains what seems correct:
[Text]
ReducedFontList=@Variant(\0\0\0\t\0\0\0\x1\0\0\0\n\0\0\0\x10\0S\0t\0\x61\0n\0\x64\0\x61\0r\0\x64)
UseReducedFontList=true
The font list on the Text preferences screen has changed as seen on fontsel-3.png.
Note that now the “Standard” font is again disabled, but now it is selected.
At this point, the Text tool behaves as expected: there is only one entry, the “Standard” CAD font.
Summary: I see two related issues:
If I tick “Use reduced selection of fonts” for the first time, “Standard” starts as being unselected, and it can not as such be selected by ticking its checkbox, because it is disabled
“Check all” does select it, but then “Uncheck all” also unselects it, whereas it should be immutable to these operations (and be selected in the first place).
What *can* be done is “Check all”, then manually unselect every other font one by one, but this is probably not how it was intended to work.
|
|
901 | QCAD (main) | Feature Request | Low | Dimension text styles | Assigned | |
|
Task Description
Support custom dimension text styles for imported DXF / DWG files.
|
|
899 | QCAD (main) | Bug Report | Low | (De-)Select Polygon - No Mode buttons/Icons showing | Closed | |
|
Task Description
Linux Mint -64
(De-)Select Polygon - No Mode buttons/Icons showing
|
|
898 | QCAD (main) | Bug Report | Low | Circle tool regression in git ec746571 | Closed | |
|
Task Description
Git ec746571 introduced the following artifact:
Start circle tool, center and radius
Click on point to select radius
Circle appears, along with a line to the coordinate system origin; also circle is not closed at around where this ghost line hits the circle entity
Happens with any circle tool, in slightly different manners
Doesn’t happen with any other tool, as far as I can tell
100% reproducible, doesn’t happen on git 6171094d.
This ghost line is also added to existing circles; ie. opening a drawing that has circles, a ghost line is attached to each of them. Not always pointing to the origin, but seems kind of random (changes with zoom level etc.)
It doesn’t seem to be a part of the drawing as such, as in ZA will not zoom so that all these ghost lines are fully visible, but the visual artifact remains.
If relevant: Linux/amd64 (Ubuntu 12.04), Qt 4.8.1, GCC 4.6.3, and as said, QCAD git ec746571.
Lines on attached illustration were not actually drawn in any way, shape or form; also they behave as if a particular line and its corresponding circle were a block, except one end of the line is firmly attached to origin.
|
|
896 | QCAD (main) | Bug Report | Low | Lineweight problem | Closed | |
|
Task Description
Linux Mint - 64
I need to laser cut some dashed circles and in order to do this I need to change the lineweight to 0.00mm (this is the lineweight I use for all laser cutting), however when I do this the result I get is not acceptable.
Using a lineweight of 0.05 is fine but our laser cutters will only read a lineweight of 0.00mm.Normally I would use a linetype of continuous and would be no problem, but for this particular job I need to use the smallest Dash option here! For now I can get around this problem but it would be good to be able to choose this lineweight and linetype choice at some stage.
|
|
895 | QCAD (main) | Feature Request | Low | Area calculation based on existing entities | Assigned | |
4 |
Task Description
Use case:
Start tool
Choose one entity of the contour
If contour is closed, area of closed contour is calculated an printed in the command line history
Configuration parameters: segment length for arc interpolation
|
|
894 | QCAD (main) | Feature Request | Low | Modify - Clip to Rectangle: copy area to clipboard | Assigned | |
2 |
Task Description
New mode for clip to rectangle: copy contents of rectangular area to clipboard.
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
892 | QCAD (main) | Bug Report | Low | DXF compatibility issues when saved as DXF R15 / dxflib | Closed | |
|
Task Description
This report concerns QCAD 3.2.1 when used without the Teigha plugin for DXF / DWG support:
While playing around, I created a simple drawing with QCAD 3.2.0 with just some lines and dimensions.
QCAD 3.2.0 renders it as shown in dim-qcad320.png.
QCAD 2.0.5.0-community renders it as shown in dim-qcad2050free.png.
DraftSight V1R3.2 pops up a window upon loading that says “Drawing file requires recovery. Do you want to proceed?”. If I choose recovery, it renders it as shown in dim-draftsightv1r32.png (if I choose not to recover, it quits). If now I save the recovered drawing in “R2000-2002 ASCII drawing (*.dxf)” format (which looks closest to what QCAD 3.2 offers to save as by default), both QCAD 2 and QCAD 3.2 render this repaired drawing as intended (ie. as in dim-qcad320.png).
|
|
891 | QCAD (main) | Bug Report | Low | Block - Create Library item: unit / reference point pos ... | Closed | |
|
Task Description
Created library item does not have the same unit as source drawing. Zero point is not at chosen reference point.
Vers. 3.2.1, Drawing Unit “inch”!
... it takes the absolute 0 point as reference.
Millimeter works fine!!!
Rest of the units .... I don’t know
|
|
889 | QCAD (main) | Feature Request | Low | Filter the current selection to only include entities o ... | Closed | |
2 |
Task Description
The property editor should do, if I change Selection: All(xx) by Filtering by Entity Type Selection: Circle(xx) only the selected enteties(in this case the circles) should be selected, so we will be able to copy, delete ... directly
Der Eigenschaften Editor sollte wenn die Auswahl: Alle(xxx) auf z.B. Auswahl: Kreise (xx) geändert wird auch nur diese Selektierung in der Zeichnung auswählen um direct kopieren, löschen ... zu können
|
|
888 | Book | Bug Report | Low | Wrong pictures in hands-on | Closed | |
|
Task Description
In the “Drawing a Shape Using Absolute Polar Coordinates” hands-on, step 3, there are two toolbar pictures, each with a caption. The pictures don’t match the captions; ie. the pictures should be swapped.
|
|
887 | QCAD (main) | Bug Report | Low | Wrong warning window with area selection ... | Closed | |
|
Task Description
Lower left to upper right selection which includes invisible blocks causes warning window if I try to use the clipboard “copy” or “cut” function:
“Trying to draw on or modify entities on a locked or invisible layer”
... but it works!
Upper right to lower left selection over all doesn’t calls the warning window!
|
|
886 | Book | Bug Report | Low | Wrong coordinates in the Orthographic Projections hands ... | Closed | |
|
Task Description
I have the book dating about a year back, with the following metadata (no other version information in there):
Producer: FPDF 1.7
CreationDate: Fri Aug 24 15:10:36 2012
I believe there is a slight error in the Orthographic Projections hands-on (it may not be there in current versions of the book, but since my download timeframe is long over, I can not check that – should that be the case, sorry for the noise).
On page 219, step 1 of the exercise (drawing the front view), it is said
Set the first corner of the rectangle at the origin of the drawing (1)
and the other corner at 30,20 (2).
On pages 225-226, steps 7 and 8, drawing a 45-degree auxiliary line for the right-side view, it is said
Set the position of the line at the origin of the drawing (coordinate 0/0).
0/0 is the “bottom left” corner of the top view. The correct coordinates for the auxiliary line’s position are 0/30, the “bottom left” corner of the front view.
(I had not realized the bug tracker had a Book category as well – hence this is a duplicate of an e-mail report I have sent to info@.)
|
|
885 | QCAD (main) | Bug Report | Low | Xcode Clang wrongly reported as GCC | Closed | |
|
Task Description
src/core/RSettings.cpp:RSettings::getCompilerVersion() doesn’t account for Clang, used in Xcode. Instead of reporting the appropriate Clang version number, it reports the GCC compatibility level. The following patch addresses the issue.
diff --git a/src/core/RSettings.cpp b/src/core/RSettings.cpp
index 46dc6df..d6fbe63 100644
--- a/src/core/RSettings.cpp
+++ b/src/core/RSettings.cpp
@@ -363,7 +363,9 @@ QString RSettings::getQtVersion() {
}
QString RSettings::getCompilerVersion() {
-#if defined(Q_CC_GNU)
+#if defined(Q_CC_CLANG)
+ return QString("Clang %1.%2.%3").arg(__clang_major__).arg(__clang_minor__).arg(__clang_patchlevel__);
+#elif defined(Q_CC_GNU)
return QString("gcc %1.%2.%3").arg(__GNUC__).arg(__GNUC_MINOR__).arg(__GNUC_PATCHLEVEL__);
#elif defined(Q_CC_MSVC)
# if _MSC_VER==1310
|
|
884 | QCAD (main) | Feature Request | Low | Tool for copying/pasting selected entities along a path | Closed | |
|
Task Description
Not sure how complicated this one might be to develop/implement ?
But a tool for copying/pasting entities along a given path would be great. In the attached snapshot you can see what I am trying to acheive - to copy/paste the brick along a wall contour. A dedicated tool for doing something like this would be great...sure I can do it with the tools provided in QCAD already but it sure would make life so much easier if there was a tool specific for this kind of thing. I am actually working on some ‘real’work projects with these requirements and it does take a bit of time to get correct!
Or maybe an additional Points tool option to plant points along a curve would be good!
|
|
883 | QCAD (main) | Feature Request | Low | Information tool for finding the centroid of an irregul ... | Closed | |
1 |
Task Description
It would be extreamly useful to have an additional info tool to be able to find the centre of gravity (centroid) for an irregualr polygon. For info please see:http://en.wikipedia.org/wiki/Centroid
Actually a tool whicn gives an option for finding the centre and centroid of polygons would be good.
|
|
882 | QCAD (main) | Feature Request | Low | Repeat last tool button | Closed | |
|
Task Description
A ‘Repeat last tool’ button would be useful. When one has fully cancelled all operations, sometimes it would be convenient to have the option to have a repeat of the last tool again...I’m thinking that a simple button could do this a bit like the reset/idle button.
|
|
881 | QCAD (main) | Feature Request | Low | Line orthogonal to line and tangential to arc, circle o ... | Closed | |
2 |
Task Description
It would be useful to have an additional line tool that could be drawn tangent to an existing circle and perpendicular to a line. see screenshot for the idea:
|
|
880 | QCAD (main) | Feature Request | Low | New Ellipse tools | Closed | |
|
Task Description
It would be good to have additional ellipse tools that could produce an ellipse: Tangential to four given sides (closed like a Quadrilateral) or sperate sides and to 4 given coordinate points. see snapshot for the idea.
|
|
879 | QCAD (main) | Bug Report | Low | Autosave function not working if file is opened directl... | Assigned | |
1 |
Task Description
If a file is opened by clicking on it in an open ZIP archive, autosave will not work.
Linux Mint -64
Autosave function not working, error warning given instead!
|
|
878 | QCAD (main) | Bug Report | Low | Paste - Flip problem | Closed | |
|
Task Description
Please see related topic: http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8292#p8292
|
|
877 | QCAD (main) | Bug Report | Low | Patches to build QCAD 3.2.0.0 on FreeBSD | Closed | |
1 |
Task Description
Hello,
The attached patches are used to build QCAD on FreeBSD.
Notes:
- patch-shared_app.pri adds a dependency to libexecinfo. It is marked as fixed in FS#876 , but still there.
It could be useful also for the other BSDs.
- patch-src_3rdparty_opennurbs_opennurbs_system.h remove malloc.h. It is marked as fixed in FS#875 , but still there.
- patch-src_3rdparty_3rdparty.pro, patch-src_core_core.pro, patch-src_core_math_RSpline.h and patch-src_entity_entity.pro allow to use opennurbs as a dependency from the ports system, which is the recommended method, but you may ignore them in the general distribution sources if you prefer.
- patch-src_core_RSettings.cpp is specific to the ports system (”/usr/local/share/qcad” is not really hardcoded, and modified according to $PREFIX at build time): you may ignore it if you want.
Best regards, – Th. Thomas
|
|
876 | QCAD (main) | Bug Report | Low | libexecinfo is needed on FreeBSD | Closed | |
|
Task Description
backtrace() and backtrace_symbols() need devel/libexecinfo on FreeBSD. The attached patch solves this, making QCAD fully buildable on FreeBSD (9).
Please note that I am by no means a qmake expert, this is likely to be a sub-standard way of attacking the problem at hand. Tweak as needed.
|
|
874 | QCAD (main) | Bug Report | Low | Spelling error in 3.2 for 3 Tangents (CT3) | Closed | |
|
Task Description
In the feedback info for 3 Tangents (CT3) there is a spelling error!
‘tree’ instead of Three is used.
|
|
873 | QCAD (main) | Feature Request | Low | command line does not accept distance value for funtion... | Assigned | |
|
Task Description
In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).
|
|
871 | QCAD (main) | Bug Report | Low | Incompatible text line feeds | Closed | |
|
Task Description
Editing text in QCAD leads to line feeds that are incompatible with some other products (\p instead of \P).
|
|
870 | QCAD (main) | Bug Report | Low | Isometric projection of text creates unwanted bounding ... | Closed | |
|
Task Description
If I use the isometric tools for a text QCAD will keep a construction Box as a leftover ...
|
|
869 | QCAD (main) | Feature Request | Low | Support for block attributes | Closed | |
|
Task Description
I would like to use QCAD at work. Since the drawing using block attributes (ATTRIB) is not displayed correctly, I am troubled. Please give me correspondence by all means.
|