|
2205 | QCAD (main) | Bug Report | Low | Text rendering fails in certain zoom level | Waiting on fix in 3rd party library | |
1 |
Task Description
Case: Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level
Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
2216 | QCAD (main) | Suggestion | Low | DIM modification cause overlapping text | Assigned | |
1 |
Task Description
When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.
|
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
2282 | QCAD (main) | Feature Request | Low | Add a "Save As" command while editing blocks in place | Assigned | |
1 |
Task Description
As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.
Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.
Thanks Andrew and team!
|
|
2284 | QCAD (main) | Bug Report | Low | Zooming in & out causes grid/snap scale value change in... | Assigned | |
1 |
Task Description
I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports. When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ, This causes a variation in the grid/snap reference points lending to drawing errors.
example When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue. Other values do, See below.
set value first zoom second zoom next zoom
point point point ...
0.01 0.1 1.0 10.0 ... 0.02 0.04 0.4 4.0 ... 0.04 0.16 1.6 16.0 ... 0.05 0.25 2.5 25.0 ... 0.0625 0.390625 3.90625 39.0625 ... 0.0254 0.64516 6.4516 64.516 ...
Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?
QCAD Professional Version: 3.26.4.0 (3.26.4) Internet: QCAD.org Build Date: Jun 3 2021 Revision: 0bb4334 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
|
|
2293 | QCAD (main) | Feature Request | Low | insert attributes into a point element | Assigned | |
1 |
Task Description
Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.
|
|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2338 | QCAD (main) | Feature Request | Low | Show non-QCAD custom XDATA optionally | Assigned | |
1 |
Task Description
QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)
I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.
(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)
|
|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
2348 | QCAD (main) | Bug Report | Low | text in simple format do not save position after save t... | Assigned | |
1 |
Task Description
How to reproduce the bug: 1-open a new file 2-select text tool, simple text(one line,no formatting) and alignment in base-left 3-write some text in somewhere position in the draw, repeat this in others positions 4-save the file in .dxf R15 [2000/LT2000] (dxflib) format 5-close Qcad 6-open the saved file, the writhed text lose original position and now all the text have 0,0 position
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
2370 | QCAD (main) | Feature Request | Low | Retain global width / segment widths when reversing pol... | Assigned | |
1 |
Task Description
Andrew,
Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.
Single line pieces as polyline default to CCW. Still the global width is cleared when trying to set them CW.
I didn’t update since 3.27.0 but reading this topic I suppose it still is valid. Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362
Regards, CVH
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
2406 | QCAD (main) | Bug Report | Low | SVG Export incorrect on blocks | Assigned | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
2416 | QCAD (main) | Feature Request | Low | Automatically set a proper alternating row color for th... | Assigned | |
1 |
Task Description
Andrew,
When switching from Default to Dark mode the text on alternating rows is hardly visible. We can customize this color.
It would be easier if a proper default color is set on switching to and back.
Perhaps the user preferences can be remembered. Perhaps only when the contrast would be affected.
Regards, CVH
|
|
2421 | QCAD (main) | Feature Request | Low | Make the preview of Shorten (LE) more visible | Assigned | |
1 |
Task Description
Andrew,
When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity. With a negative amount there is seemingly no preview. It is generated and shown but one can not distinguish it especially with solid lines.
Adding an orthogonal auxiliary preview shape some N pixels long would do the trick.
Regards, CVH
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
2446 | QCAD (main) | Feature Request | Low | Extending dimension line beyond extension line when usi... | Assigned | |
1 |
Task Description
I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785
|
|
2448 | QCAD (main) | Feature Request | Low | Scale lineweight display on model space | Assigned | |
1 |
Task Description
Currently, the model space can display lineweights at scale 1:1 It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing. But this feature is unusable for architects or users who draw large objects.
Therefore, it would be very useful to have a factor to multiply lineweight display in model space. For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50. Then every line would be displayed 50x thicker in model space.
|
|
2453 | QCAD (main) | Bug Report | Low | Control point Splines - Issue with Closed & Minimal poi... | Assigned | |
1 |
Task Description
Andrew, For more detailed description please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=40081#p40081
In the included screen grab below, left is when drawn cubic, closed periodic, from 4 points. Right is when the file is re-loaded.
It is hard to select the incorrect shape when pointing near it ... Probably it is referring to the correct internal shape. After drawing it explodes to a Null length polyline with 2 identical vertices.
I can’t include the error in a file as it reverts on re-load.
The same issue exist for quadratic, closed periodic, from 3 points.
Regards, CVH
|
|
2478 | QCAD (main) | Feature Request | Low | Make RMathLineEdit unit aware | Assigned | |
1 |
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094
When entering 1’ 1’‘ in an input field. - As the size of the rectangle in the topic - As the length property of a line selected in the drawing - ....
Returns 13 in a drawing in mm. And also in a drawing in inch what turns out to be correct. But also in a drawing in foot.
Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.
Regards, CVH
|
|
2482 | QCAD (main) | Bug Report | Low | RShape::getIntersectionPointsCC still failing for touch... | Assigned | |
1 |
Task Description
Andrew,
Referring to this forum post: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10152
With radii 1341.35667735 and 26 the relative tolerance is 0.00683678 and exceeds the former used fixed tolerance of 1e-4.
These arcs will then be considered to be tangent and the intersection point is 0.31024 units to the left of where we expect it.
Implemented: https://github.com/qcad/qcad/commit/77ae3e4518cc34f178779d2d2c724adcf80c229d#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449
Updated: https://github.com/qcad/qcad/commit/071b60acd1176e6301bf6b6fcf716684221a97e8#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449
I had already expressed my reserves on the relative tolerance but that was already a better solution for small arcs: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8775&p=34907#p34907
We could limit the tolerance by: A- The smallest of the fixed and the relative. B- A relative tolerance based on R2 there circle 1 is forced to be the larger one.
This will never account for the position in the plane. At a certain point the tolerance will be less than the accuracy/certainty of the values.
Regards, CVH
|
|
2498 | QCAD (main) | Bug Report | Low | Light/dark mode UI colours depend on OS theme when QCAD... | Assigned | |
1 |
Task Description
On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.
To reproduce:
1. Set the OS to light mode.
2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.
3. With QCAD still running, switch the OS to dark mode.
4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.
A similar behaviour is observed when starting from dark mode and switching to light mode.
I hope that makes sense. See attached screenshots for examples.
|
|
2507 | QCAD/CAM | Feature Request | Low | Add Toolpath from Layer | Assigned | |
1 |
Task Description
I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.
Desired functionality:
1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection) 2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality) 4) Choosing an active Layer will use the Layer as source of EntityIds 5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.
I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.
For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.
Thanks
|
|
2540 | QCAD (main) | Feature Request | Low | Retain original handle when Hatch properties are change... | Assigned | |
1 |
Task Description
Andrew,
When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle. This doesn’t influence the drawing order in direct. But already changing the drawing order of a Hatch it is recreated as a new entity.
It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.
Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.
This is more pronounced when copying/pasting entities from a source to a target drawing. The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.
Most other entities are probably just updated in situ. It is unsure to me at this point if merely updating a Hatch is even possible. And perhaps this is related to the addObject ForceNew flag what is false by default.
Regards, CVH
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Unconfirmed | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
1 |
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
2098 | QCAD (main) | Bug Report | Very Low | Offset will pick up hidden blocks while using it in a l... | Assigned | |
1 |
Task Description
When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden. It is not happening with all the block.
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
2176 | QCAD (main) | Bug Report | Very Low | Modify > Break out Manual: relevance of order of click ... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7; Win installer 32 bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988 File included. I have no intention to make 48 separate reports.
CVH
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
2248 | QCAD (main) | Bug Report | Very Low | Themes: east and west dock widget tabs facing the wrong... | Assigned | |
1 |
Task Description
Hi Andrew
In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions. I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report. I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..
Best Regards John Hyslop PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu
|
|
2302 | QCAD (main) | Bug Report | Very Low | polygon.getSelfIntersectionPoints(tol) returns 3th inva... | Assigned | |
1 |
Task Description
Windows 7 pro 32 bit msi-Installer Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Andrew,
In the attached dxf: Besides that it is clear that duplicate vectors are not filtered ... Where a segment is crossing in another node a non valid node is returned as self-intersection point. Seems to be unrelated to CW/CCW or tolerance.
Where 2 nodes coexists 4 duplicate vectors are returned.
Regards, CVH
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|