|
850 | QCAD (main) | Bug Report | Low | Splines not selectable | Closed | |
|
Task Description
Imported splines which typically represent lines, circles or arcs (explicit knot vector given) are sometimes wrongly identified as invalid by the OpenNURBS library. This results in splines that are loaded and displayed correctly but are not selectable.
|
|
1014 | QCAD (main) | Bug Report | Low | Spline shape changes in DXF/DWG file when saved after m ... | Closed | |
|
Task Description
Draw Spline from fit points
Mirror spline
Save as DXF/DWG
Load into 3rd party application
spline shape changed
Reconstructing the mirrored spline from scratch maybe used as a workaround.
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2754
|
|
777 | QCAD (main) | Bug Report | Low | Spline display error | Closed | |
|
Task Description
Splines produced by Illustrator are not correctly imported or displayed.
See: http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2344
|
|
659 | QCAD (main) | Bug Report | Very Low | Some true type fonts may not be supported | Closed | |
|
Task Description
Customer reports that TTF called “Magneto” is not shown properly.
|
|
469 | QCAD (main) | Bug Report | Low | Solid entity properties | Closed | |
|
Task Description
Split from FS#465 by Stefan:
After more testing, it seems that a solid triangle causes trouble, perhaps correlated to Z-coordinates and the property editor.
Attached you find a dxf example file with only 7 objects. Three noticable cases: - Selecting all and change Selection in the property editor to “Solid” flips to “No Selection” although objects selected. - Selecting all and change Selection in the property editor to “Line” shows “Length” and “Angle” in Geometry with “*VARIES*” values although only one line is selected. - Selecting all but the solid object (6 objects selected now), everything works as expected, in particular Selection “Line” shows valid values (and Z-coordinate 0).
I hope this helps, please give instructions how to help if necessary.
|
|
1379 | QCAD (main) | Bug Report | Low | Snap: cannot snap to intersection between infinite line ... | Closed | |
|
Task Description
Intersections between polylines and XLines (infinite lines, contruction lines) cannot be found in some situations.
|
|
2208 | QCAD (main) | Bug Report | Low | Snap: Cannot snap to block arrays | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8251
|
|
1088 | QCAD (main) | Bug Report | Low | Snap: can snap to endpoints of text entities in block r ... | Closed | |
|
Task Description
Create block with text entity in it
Insert block reference
Snap tools snap to endpoints, centers, etc. of text entity shapes
|
|
126 | QCAD (main) | Feature Request | Low | Snap to reference points of arcs | Closed | |
|
Task Description
Snap to reference points does not work for arc entities as one would expect. The four points on the arc at angles 0,90,180,270 should be reference points (like for circles).
|
|
254 | QCAD (main) | Bug Report | Low | Snap to ellipse / ellipse intersections | Closed | |
|
Task Description
Snap to ellipse / ellipse intersections
|
|
386 | QCAD (main) | Bug Report | Low | Snap to center: does not work for circles in block refe ... | Closed | |
|
Task Description
Snap to center: does not work for circles in block references
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1705
|
|
132 | QCAD (main) | Task | Low | Snap restrictions | Closed | |
|
Task Description
Implement snap restrictions
|
|
331 | QCAD (main) | Bug Report | Low | Snap buttons doubled | Closed | |
|
Task Description
1. For some reason on the Window machine, the snap toolbar buttons are doubled for all functions. I therefore have two buttons for each type of snap and cannot access the bottom snaps unless I undoc the toolbar.
For some reason, this is still fine in the Linux Beta 3. Single buttons like always.
Reported by: koosjr
|
|
2420 | QCAD (main) | Bug Report | Low | Snap > X/Y from Points / Y/X from Points: command line ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9663
|
|
1253 | QCAD (main) | Bug Report | Low | Snap > Intersection Manual: no result between line and ... | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3661
|
|
1878 | QCAD (main) | Feature Request | Low | Snap > Distances from 2 Points: snap to point with give... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211
|
|
1315 | QCAD (main) | Performance Issue | Low | Snap > Auto Snap: slow when snapping to complex polylin ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3838
|
|
2090 | QCAD (main) | Bug Report | Low | Snap > Auto Snap: intersections of pattern with other e ... | Closed | |
|
Task Description
- Create hatch with pattern “ANSI31” (or other). - Move cursor along boundary with auto snap - Auto snap finds intersections between hatch pattern and boundary or other entities close to the hatch boundary
|
|
233 | QCAD (main) | Performance Issue | Low | Slower selection / manipulation | Closed | |
|
Task Description
Slower selection / manipulation compared to QCAD 2.
|
|
728 | QCAD (main) | Performance Issue | Low | Slow loading of drawing with many block inserts | Assigned | |
1 |
Task Description
Slow loading of drawing with huge number of block inserts (more than 10000).
|
|
1308 | QCAD (main) | Bug Report | Low | Simple text: x-scale not saved | Closed | |
|
Task Description
Create simple text (no formatting) Set x scale to a factor other than 1 Save and reload X scale is reset to 1
|
|
351 | QCAD (main) | Bug Report | Low | Simple text: position, simple text flag | Closed | |
|
Task Description
Simple text tool does not create simple text but mtext. When changed to simple in property editor, position does not work
|
|
116 | QCAD (main) | Feature Request | Low | Show polyline area in property editor | Closed | |
2 |
Task Description
Show area of closed polyline, hatch, solid fill in property editor.
|
|
232 | QCAD (main) | Feature Request | Low | Show / hide block references from block list (eye-icon) | Closed | |
|
Task Description
Show / hide block references from block list (eye-icon)
|
|
1352 | QCAD (main) | Bug Report | Low | Shortcuts not working when action not visible | Closed | |
|
Task Description
This also affects actions which are never added to a menu, tool bar or CAD tool bar (e.g. property editor layer menu).
See also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3921
|
|
346 | QCAD (main) | Feature Request | Low | Set up fixed grid | Closed | |
|
Task Description
Set up fixed grid without any auto scaling or adjusting or meta grid at all.
|
|
133 | QCAD (main) | Task | Low | Set relative zero point | Closed | |
|
Task Description
Set relative zero point tool.
|
|
1549 | QCAD (main) | Feature Request | Low | Separate Coordinate Display from Drawing Dimensions | Assigned | |
|
Task Description
Source: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752
According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.
|
|
172 | QCAD (main) | Feature Request | Medium | send to back / to front | Closed | |
|
Task Description
implement
|
|
163 | QCAD (main) | Bug Report | Low | Selection with locked layers | Closed | |
|
Task Description
- two lines on top of each other - one line on locked layer - one line on unlocked layer
Selection of the line on unlocked layer should be easily possible.
|
|
162 | QCAD (main) | Bug Report | Low | Selection tools: select entities on hidden layers | Closed | |
|
Task Description
Rectangle select selects entities on hidden layers Select all selects entities on hidden layers
|
|
982 | QCAD (main) | Bug Report | Low | Selection filter: selects entities on hidden layers | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=34&t=2690
|
|
1361 | QCAD (main) | Bug Report | Low | Selection Filter: Selecting by property "Color" does no ... | Closed | |
|
Task Description
Selection filter should offer choices “By Layer”, “By Block” for “Color” property.
|
|
983 | QCAD (main) | Feature Request | Low | Selection filter: only show available entity types | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=2689
|
|
985 | QCAD (main) | Bug Report | Low | Selection filter: layers / blocks not updated | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2694
|
|
1029 | QCAD (main) | Performance Issue | Low | Selecting many entities: poor performance | Closed | |
|
Task Description
Selecting a great number of entities (>10000) can be slow, likely due to updating the property editor.
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
296 | QCAD (main) | Bug Report | Low | Segmentation Fault: Mac OS X: Print Preview | Closed | |
|
Task Description
Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libobjc.A.dylib 0x9392df87 objc_msgSend + 23 1 QtGui 0x05006ceb -[QCocoaWindow sendEvent:] + 267 2 com.apple.AppKit 0x902b760b -[NSApplication sendEvent:] + 6431 3 QtGui 0x0500a3ed -[QNSApplication sendEvent:] + 93 4 com.apple.AppKit 0x9024b253 -[NSApplication run] + 917 5 QtGui 0×05014481 QEventDispatcherMac::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) + 1505 6 QtCore 0x04d60941 QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) + 65 7 QtCore 0x04d60c8a QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) + 170 8 QtCore 0x04d620e6 QCoreApplication::exec() + 182 9 ...ript_core_debug.1.0.0.dylib 0x1dec391e qtscript_QCoreApplication_static_call(QScriptContext*, QScriptEngine*) + 1316 (qtscript_QCoreApplication.cpp:314) 10 QtScript 0x04af8318 QScript::FunctionWrapper::proxyCall(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) + 136 11 QtScript 0x04a10871 QTJSC::NativeFuncWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) const + 113 12 QtScript 0x049e5ac9 cti_op_call_NotJSFunction + 489 13 ??? 0x202e626f 0 + 539910767 14 QtScript 0x0499d057 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, int, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 1031 15 QtScript 0x0499d351 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 97 16 QtScript 0x04aca7b6 QScriptEnginePrivate::evaluateHelper(QTJSC::ExecState*, long, QTJSC::EvalExecutable*, bool&) + 582 17 QtScript 0x04acb011 QScriptEngine::evaluate(QString const&, QString const&, int) + 801 18 com.ribbonsoft.qcad 0x0003868b RScriptHandlerEcma::eval(QString const&, QString const&) + 57 19 com.ribbonsoft.qcad 0x00037c6f RScriptHandlerEcma::doScript(QString const&, QStringList const&) + 805 20 com.ribbonsoft.qcad 0x009c3b8d RScriptHandler::init(QString const&, QStringList const&) + 641 21 com.ribbonsoft.qcad 0x0002f4b8 main + 3878 (main.cpp:218) 22 com.ribbonsoft.qcad 0x0002e289 _start + 208 23 com.ribbonsoft.qcad 0x0002e1b8 start + 40
|
|
644 | QCAD (main) | Feature Request | Low | Search for text | Closed | |
|
Task Description
Search for a text, highlight or select (?) the result(s).
|
|
550 | QCAD (main) | Feature Request | Low | Search / replace for (selected) text entities | Closed | |
|
Task Description
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=1923
|
|
393 | QCAD (main) | Feature Request | Low | Scrolling with arrow keys | Closed | |
|
Task Description
Scrolling with arrow keys
|
|
230 | QCAD (main) | Feature Request | Low | Scroll bars optional | Closed | |
|
Task Description
Provide option to hide scroll bars.
|
|
426 | QCAD (main) | Feature Request | Low | Scriptable entities | Closed | |
|
Task Description
Provide script functionality for entities:
Paint or decorate entity, for example based on custom properties assigned to the entity
Listen and react to events
|
|
443 | QCAD (main) | Bug Report | Low | Script exception when selecting a spline with fit point ... | Closed | |
|
Task Description
Script exception when selecting a spline with fit points and a spline with control points
|
|
956 | QCAD (main) | Bug Report | Low | Screen based linetypes: splines, texts, dimensions | Closed | |
|
Task Description
Screen based linetypes not working for splines, texts (CAD fonts) and dimension arrows.
|
|
1865 | QCAD (main) | Bug Report | Low | Scaling polyline with width by negative factor removes ... | Closed | |
|
Task Description
Create polyline with global width (e.g. 10)
Scale polyline by factors X=-1, Y=1
Polyline loses width
|
|
2171 | QCAD (main) | Bug Report | Low | Scaling a block reference should not scale line type pa ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7948
|
|
1246 | dxflib | Bug Report | Low | Saving MText with linefeeds in escaped text causes corr ... | Closed | |
|
Task Description
Saving MText with linefeeds in escaped text causes corruption of file.
See: http://www.qcad.org/rsforum/viewtopic.php?f=76&t=3593
|
|
1732 | dxflib | Bug Report | Low | Saving dimension with custom text position | Closed | |
|
Task Description
Custom text position must be written as type flag (code 70, flag 128) as well as in style overrides as codes
1070
279
1070
2
|
|
911 | QCAD (main) | Bug Report | Low | Saving / loading text with accents ('é') | Closed | |
|
Task Description
Text with é turns into È.
|