|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
652 | QCAD (main) | Bug Report | Low | Arbitrary options toolbar height | Closed | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=2099
|
|
670 | QCAD (main) | Feature Request | Low | Configurable rendering options for stacked text | Assigned | |
1 |
Task Description
Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript). This may also apply to superscripts.
|
|
684 | QCAD (main) | Feature Request | Low | Configurable behavior for using box selection with Shif... | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180
|
|
728 | QCAD (main) | Performance Issue | Low | Slow loading of drawing with many block inserts | Assigned | |
1 |
Task Description
Slow loading of drawing with huge number of block inserts (more than 10000).
|
|
731 | QCAD (main) | Bug Report | Low | Break out segment: fails in some cases | Closed | |
1 |
Task Description
See fs731.dxf
|
|
735 | QCAD (main) | Bug Report | Low | Angle dimensioning | Assigned | |
1 |
Task Description
See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
809 | QCAD (main) | Bug Report | Low | Hatch modifications and undo | Closed | |
1 |
Task Description
- Draw ellipse - Fill ellipse (solid or hatch) - Rotate ellipse and filling - Undo
→ Angle of ellipse shaped fill is not undone.
Other hatch boundary elements that break or cannot be undone: - splines from fit points - arcs (when only one point is moved, e.g. stretch) - circles (when radius changes, e.g. scale, position changes) - ellipses (when major point changes)
|
|
928 | QCAD (main) | Task | Low | CXF font editing | Closed | |
1 |
Task Description
Port CXF font editor to QCAD 3. - Load CXF fonts (load glyphs into blocks) - Save back to CXF format
|
|
940 | QCAD (main) | Feature Request | Low | Automatically change fonts in a drawing | Closed | |
1 |
Task Description
Apply a font name replacement table to a drawing. E.g. change font ‘romanc’ to ‘Arial’, etc.
|
|
979 | QCAD (main) | Feature Request | Low | Text dialog: insert special characters in simple text m... | Assigned | |
1 |
Task Description
The Omega button to insert special characters is only available in rich text mode. Make it available in simple text mode as well.
|
|
994 | QCAD (main) | Feature Request | Low | Create block from selection: overwrite existing block | Closed | |
1 |
Task Description
Create a new block from a selection Enter the name of an existing block Overwrite warning Overwrite block
|
|
995 | QCAD (main) | Feature Request | Low | Property editor: add 'edit block' button | Assigned | |
1 |
Task Description
Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.
|
|
1021 | dwg2pdf | Feature Request | Low | dwg2pdf: switch to set block to export | Closed | |
1 |
Task Description
Add a command line switch to dwg2pdf to export a given block instead of “*Model_Space”.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1139 | dxflib | Bug Report | Low | dxflib: leading / trailing spaces are removed from text | Closed | |
1 |
Task Description
dxflib strips leading / trailing spaces from text when importing DXF files.
|
|
1169 | QCAD (main) | Feature Request | Low | Bitmap clipping | Assigned | |
1 |
Task Description
Clipping bitmaps to only show a part of the image.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
1 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|
|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
1394 | QCAD (main) | Feature Request | Low | Arc length dimension | Closed | |
1 |
Task Description
Support arc length dimenions (undocumented DXF entity ‘ARC_DIMENSION’). Create arc length dimensions with parallel extension lines for angle < 90, orthogonal extension lines otherwise. Display arc symbol beside or on top of label text.
|
|
1425 | QCAD (main) | Feature Request | Low | Automatically create hatch entities behind border entit... | Assigned | |
1 |
Task Description
Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.
|
|
1430 | QCAD (main) | Feature Request | Low | Modify > Round: one-click fillet | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256
|
|
1449 | QCAD (main) | Feature Request | Low | Property Editor: show centroid of polylines | Closed | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320
|
|
1484 | QCAD (main) | Feature Request | Low | Dimensions: optionally use comma instead of dot | Closed | |
1 |
Task Description
Use comma to display dimension labels.
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1566 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: deleted bl ... | Closed | |
1 |
Task Description
Deleted (undone) block attributes are stored to DXF/DWG.
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
1 |
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1878 | QCAD (main) | Feature Request | Low | Snap > Distances from 2 Points: snap to point with give... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1975 | QCAD (main) | Bug Report | Low | RPolyline::getOrientation: Wrong orientation for polyli ... | Closed | |
1 |
Task Description
Wrong orientation is returned for polylines with large arcs (>180d).
Replaces FS#1967 .
|
|
2006 | dwg2pdf | Feature Request | Low | dwg2pdf: Auto detect page orientation | Closed | |
1 |
Task Description
Auto detect page orientation based on width / height of document.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6774
|
|
2400 | QCAD (main) | Bug Report | Low | View > Selection Filter: Entity type "Any" has no effec ... | Closed | |
1 |
Task Description
The “Any” filter matches no entities.
|
|
2534 | QCAD (main) | Bug Report | Low | Clipping in model space after working in paper space | Closed | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10650
|
|
1179 | QCAD (main) | Bug Report | Critical | Crash when opening empty file | Closed | |
|
Task Description
Files which don’t contain any entities cannot be loaded (bulk load of spatial index library fails with exception).
|
|
44 | QCAD (main) | Bug Report | High | Save might not save in last chosen format | Closed | |
|
Task Description
File - Save might not save in last chosen format but default format. E.g. if a file is saved as DXF R12, and then saved, check if the format is still DXF R12 and not the default DXF format (2010).
|
|
49 | QCAD (main) | Bug Report | High | Import QCAD 2 drawings | Closed | |
|
Task Description
Load QCAD 2 drawings, including:
print preview settings, drawing scale, etc.
hatch patterns
fix name
fix scale
fix angle
dimension labels (tolerances)
|
|
85 | QCAD (main) | Bug Report | High | QCAD 2 example drawing errors | Closed | |
|
Task Description
Fix QCAD 2 example drawings:
dimension labels with tolerances
hatch pattern scale
|
|
105 | QCAD (main) | Bug Report | High | Undo after line end point drag'n'drop operation | Closed | |
|
Task Description
Undo undoes end point movement and angle change (angle property should be ignored in undo/redo operations).
|
|
142 | QCAD (main) | Bug Report | High | Crash when staring QCAD with LibraryBrowser module | Closed | |
|
Task Description
QCAD crashes directly after start (when all plugins have been loaded) with a “Bus Error” or segmentation fault in approximately 90% of all starts with the LibraryBrowser module. Without modules
scripts/Widgets/LibraryBrowser
scripts/Tools/LibraryTranslator
scripts/Developer/BookImages
scripts/Developer/UiTest/LibraryBrowserTest
scripts/Developer/UiTest/LibraryBrowserTest2
no crashes occur.
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 QtGui 0x0349d27b QWidgetPrivate::showChildren(bool) + 235
1 QtGui 0x0349d38b QWidgetPrivate::show_helper() + 107
2 QtGui 0x0349d2b9 QWidgetPrivate::showChildren(bool) + 297
3 QtGui 0x0349d38b QWidgetPrivate::show_helper() + 107
4 QtGui 0x034a13c3 QWidget::setVisible(bool) + 1075
5 QtGui 0x0349fd7a QWidget::qt_metacall(QMetaObject::Call, int, void**) + 1098
6 QtGui 0x03abf6a5 QMainWindow::qt_metacall(QMetaObject::Call, int, void**) + 53
7 com.ribbonsoft.qcad 0x007d31c7 RMainWindowQt::qt_metacall(QMetaObject::Call, int, void**) + 45
8 QtScript 0x05aa79db QScript::callQtMethod(QTJSC::ExecState*, QMetaMethod::MethodType, QObject*, QTJSC::ArgList const&, QMetaObject const*, int, bool) + 11595
9 QtScript 0x05aab60e QScript::QtFunction::execute(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::ArgList const&) + 174
10 QtScript 0x05aab900 QScript::QtFunction::call(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) + 224
11 QtScript 0x059aec41 QTJSC::NativeFuncWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) const + 113
12 QtScript 0x05983e99 cti_op_call_NotJSFunction + 489
13 ??? 0x1a761a65 0 + 443947621
14 QtScript 0x0593b427 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, int, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 1031
15 QtScript 0x0593b721 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 97
16 QtScript 0x05a68cb6 QScriptEnginePrivate::evaluateHelper(QTJSC::ExecState*, long, QTJSC::EvalExecutable*, bool&) + 582
17 QtScript 0x05a69511 QScriptEngine::evaluate(QString const&, QString const&, int) + 801
18 com.ribbonsoft.qcad 0x0003589b RScriptHandlerEcma::eval(QString const&, QString const&) + 57
19 com.ribbonsoft.qcad 0x000357f1 RScriptHandlerEcma::doScript(QString const&, QStringList const&) + 805
20 com.ribbonsoft.qcad 0x00923a19 RScriptHandler::init(QString const&, QStringList const&) + 641
21 com.ribbonsoft.qcad 0x0002d51f main + 2417 (main.cpp:172)
22 com.ribbonsoft.qcad 0x0002c909 _start + 208
23 com.ribbonsoft.qcad 0x0002c838 start + 40
|
|
224 | QCAD (main) | Bug Report | High | Printing not working under Windows | Closed | |
|
Task Description
Printing does nothing. Sometimes crashes on quite (possibly related to printing). PDF export works (as a workaround).
|
|
253 | QCAD (main) | Bug Report | High | coordinate input | Closed | |
|
Task Description
Coordinate input broken.
|
|
440 | QCAD (main) | Bug Report | High | Assert: Current layer invalid | Closed | |
|
Task Description
- Add layer - Undo → Current layer is invalid - Draw line → Assert
|
|
1280 | QCAD (main) | Bug Report | High | Dimension > Leader: crash when attempting to draw leade ... | Closed | |
|
Task Description
- Create new empty drawing - Make layer 0 invisible or lock it - Dimension > Leader - Set start point
|
|
1331 | QCAD (main) | Bug Report | High | QCAD cannot be launched, application preferences incomp ... | Closed | |
|
Task Description
Missing file Qt5XmlPatterns.dll in Windows 64bit release.
|
|
1658 | QCAD (main) | Bug Report | High | Crash when switching to layout block (32bit Linux, Qt4) | Closed | |
|
Task Description
Affects 32bit Linux when compiled against Qt4 (legacy platform release).
|