QCAD Bugtracker

Installing QCAD 3 RC5 under Linux using the .bin installer leads to an English only installation.

Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)

example file generator: adjust the print settings automatically, so the example file can be immediately printed to the chosen paper format / orientation without having to adjust the scale / offset

Snapshot release 3.23.0.2

See also:
https://qcad.org/rsforum/viewtopic.php?p=24757

Points are not being exported.

This option seems to only work with the script debugger enabled.
See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3091

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914

When switching from one drawing to another, the 3D view is updated which can be slow, especially for drawings with many text entities.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4945

1. Load drawing
2. Create new drawing
3. Add toolpath / tool
4. CAM > CAM Export

Fails to identify current config (post processor).

Clicking cancel button only hides dialog but does not stop nesting. Escape key works as expected.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=8449

Lead out type and size are not respected (signals blocked and not unblocked).

- Create a block reference to block “A” - Duplicate block reference
- Nest both block references

Only one block reference is nested, the other one is not placed.

Exception in CAM simulation when previewing tool position.

If nesting preference “Place small parts into holes of other parts” is disabled there may be fewer solutions or no solution if rotations is set to 1.

formatValue returns “0” instead of “+0” for negative values that round up to 0 with the configured decimals.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=76&t=5092

See:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9940

Files which don’t contain any entities cannot be loaded (bulk load of spatial index library fails with exception).

File - Save might not save in last chosen format but default format.
E.g. if a file is saved as DXF R12, and then saved, check if the format is still DXF R12 and not the default DXF format (2010).

Load QCAD 2 drawings, including:

• print preview settings, drawing scale, etc.
• hatch patterns
  • fix name
  • fix scale
  • fix angle
• dimension labels (tolerances)

Fix QCAD 2 example drawings:

1. dimension labels with tolerances
2. hatch pattern scale

Undo undoes end point movement and angle change (angle property should be ignored in undo/redo operations).

QCAD crashes directly after start (when all plugins have been loaded) with a “Bus Error” or segmentation fault in approximately 90% of all starts with the LibraryBrowser module. Without modules

• scripts/Widgets/LibraryBrowser
• scripts/Tools/LibraryTranslator
• scripts/Developer/BookImages
• scripts/Developer/UiTest/LibraryBrowserTest
• scripts/Developer/UiTest/LibraryBrowserTest2

no crashes occur.

Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
0   QtGui                         	0x0349d27b QWidgetPrivate::showChildren(bool) + 235
1   QtGui                         	0x0349d38b QWidgetPrivate::show_helper() + 107
2   QtGui                         	0x0349d2b9 QWidgetPrivate::showChildren(bool) + 297
3   QtGui                         	0x0349d38b QWidgetPrivate::show_helper() + 107
4   QtGui                         	0x034a13c3 QWidget::setVisible(bool) + 1075
5   QtGui                         	0x0349fd7a QWidget::qt_metacall(QMetaObject::Call, int, void**) + 1098
6   QtGui                         	0x03abf6a5 QMainWindow::qt_metacall(QMetaObject::Call, int, void**) + 53
7   com.ribbonsoft.qcad           	0x007d31c7 RMainWindowQt::qt_metacall(QMetaObject::Call, int, void**) + 45
8   QtScript                      	0x05aa79db QScript::callQtMethod(QTJSC::ExecState*, QMetaMethod::MethodType, QObject*, QTJSC::ArgList const&, QMetaObject const*, int, bool) + 11595
9   QtScript                      	0x05aab60e QScript::QtFunction::execute(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::ArgList const&) + 174
10  QtScript                      	0x05aab900 QScript::QtFunction::call(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) + 224
11  QtScript                      	0x059aec41 QTJSC::NativeFuncWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) const + 113
12  QtScript                      	0x05983e99 cti_op_call_NotJSFunction + 489
13  ???                           	0x1a761a65 0 + 443947621
14  QtScript                      	0x0593b427 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, int, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 1031
15  QtScript                      	0x0593b721 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 97
16  QtScript                      	0x05a68cb6 QScriptEnginePrivate::evaluateHelper(QTJSC::ExecState*, long, QTJSC::EvalExecutable*, bool&) + 582
17  QtScript                      	0x05a69511 QScriptEngine::evaluate(QString const&, QString const&, int) + 801
18  com.ribbonsoft.qcad           	0x0003589b RScriptHandlerEcma::eval(QString const&, QString const&) + 57
19  com.ribbonsoft.qcad           	0x000357f1 RScriptHandlerEcma::doScript(QString const&, QStringList const&) + 805
20  com.ribbonsoft.qcad           	0x00923a19 RScriptHandler::init(QString const&, QStringList const&) + 641
21  com.ribbonsoft.qcad           	0x0002d51f main + 2417 (main.cpp:172)
22  com.ribbonsoft.qcad           	0x0002c909 _start + 208
23  com.ribbonsoft.qcad           	0x0002c838 start + 40

Printing does nothing.
Sometimes crashes on quite (possibly related to printing).
PDF export works (as a workaround).

Coordinate input broken.

- Add layer
- Undo
→ Current layer is invalid
- Draw line
→ Assert

- Create new empty drawing
- Make layer 0 invisible or lock it
- Dimension > Leader
- Set start point

Create spline through point P.
Create zero length line at P.
Snap to P → crash.

Missing file Qt5XmlPatterns.dll in Windows 64bit release.

Affects 32bit Linux when compiled against Qt4 (legacy platform release).

Depolyment issue with qcaddwg plugin.

Importing or pasting a drawing which references a non-existing image crashes.

RGraphicsSceneDrawable or type image references deleted, temporary preview document through RImageData which leads to crash when trying to load the image.

Exception due to invalid include path.

Recursion in move, rotate, mirror, stretch of viewport entity.

Move cursor near spline, e.g. when drawing line with auto snap active.

Custom text height cannot be set (enter closes the dialog, tab does not activate the entered text height)

cannot hatch single full ellipse

Printing segfaults under Linux after the printer dialog is shown.

Advanced selection dialog hits a debugger statement on line 1088.

1. Selection- Advanced Selection
2. Change first combo box to “Any”

implement

Chain dimensions

Reference dimensioning (baseline dimensioning)

Create multiple dimensions using the same base line.

Text position of texts in blocks wrong.

“Null Object ID” exception when saving a previously loaded file.

File: “fs515.dwg”

To reproduce:
- Create a part library item with file name “Test1 .dxf” (note the space at the end of the base name)
- Insert this part library item into a blank drawing
- Try to save the drawing
- Error “Invalid Symbol Table Name” occurs