QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1302QCAD (main)Feature RequestLowIsometric projection on the current layerAssigned
0%
2 Task Description

It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.

1345QCAD (main)Feature RequestLowAdded option to paste a number of entities with even/eq...Assigned
0%
2 Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209

An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.

1356QCAD (main)Feature RequestLowOption to lengthen/Shorten from both ends of entity at ...Assigned
0%
2 Task Description

It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.

1362QCAD (main)Feature RequestLownew layer tool: Toggle visibility allAssigned
0%
2 Task Description

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ... ;-)

pics: “Toggle visibility all” with one click:

1364QCAD (main)Feature RequestLowNew Tool -'Run Parallel with'Assigned
0%
2 Task Description

New Tool request:

When drawing a line it would be good to have a tool/option to ‘run parallel with’.

For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!

1552QCAD (main)Feature RequestLowLayers: assign different color for printingAssigned
0%
2 Task Description

Original request:

https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
2 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

1627QCAD (main)Feature RequestLowrevision cloudAssigned
0%
2 Task Description

how do i draw revision cloud in Qcad pro
or when do you will implemented it

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
2 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
2 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

1887dwg2bmpFeature RequestLowAdd "-max-lineweight" option for dwg2bmpAssigned
0%
2 Task Description

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

2091QCAD (main)Feature RequestLowToggle redrawing of hatches Assigned
0%
2 Task Description

Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.

The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.

This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch.
Or the draft mode can be extended to include simplified hatches while modifying.

Also see the discussion

2127QCAD (main)Feature RequestLowSnap for predicted intersections while using "Restrict ...Assigned
0%
2 Task Description

I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.

Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.

Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.

2128QCAD (main)Feature RequestLow"Create Library Item" "Save As" dialogue doesn't rememb...Assigned
0%
2 Task Description

This is either a bug or a feature request, depending on perspective; my apologies if I’ve picked the wrong one. Additional discussion can be found here.

Steps to reproduce:
1. Create an entity
2. Run “Create Library Item” [BT]
3. Select Reference Point

Expected outcome:
“Save As” dialogue opens in the directory that the previous library item was saved in

Actual outcome:
“Save As” dialogue opens in ( RSettings.getLaunchPath() + “/libraries” )

Additional Context:
The reason I’ve categorized this as a bug is because, relative to the behaviour of the main “Save As” dialogue (which does remember the last directory used) the behaviour of the “Create Library Item” “Save As” dialogue is unexpected.

Software versions:
QCAD 3.25.2 Pro
Windows 10 Pro

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

2138QCAD (main)SuggestionVery LowBlock zoomstate supersedes Model_Space after Undo of BCAssigned
0%
1 Task Description

Summary: Block zoomstate supersedes Model_Space after Undo of BC

QCAD Professional
Version: 3.25.2.1 (3.25.2.1)
Internet: QCAD.org
Build Date: Oct 15 2020
Revision: 2895712
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown «< (Win installer 32 bit)

With the file provided:
ZW to see the top green ‘revision cloud’ up close
QQ
Box select around the cloud
»> 2 entities in selection
BC, select origin somewhere inside the selection, accept proposed naming
»> ‘Block 1’ is created from the selection
TN
BD, select the newly created Block Reference
»> Auto zoom of ‘Block 1’ (Intended behavior)
OO
»> Returns to Model_Space with the zoomstate of the removed Block
»> Halfway down the drawing
»> The former zoomstate of the Model_Space is lost

Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378

This proves they do, even if the block doesn’t exists anymore.

Regards,
CVH

PS: 3th trial to enter a suggestion ...

2140QCAD (main)SuggestionLowChanging navigation mode for mouse wheel doesn't change...Assigned
0%
1 Task Description

Looks like error, but may be that’s feature request.

CAD software uses typical navigation behavior as:
Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.

Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior:
Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.

Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.

QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel.
Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!

Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.

2146QCAD (main)SuggestionVery LowKeep 'Invisible' objects invisible while savingAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882
Explanation found in REntity.cpp
Listed as a Public Member Functions inherited from RObject

Regards,
CVH

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2177DocumentationSuggestionLowUpdate class_r_polyline.htmlAssigned
0%
1 Task Description

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

2242QCAD (main)SuggestionLowBill of MaterialsAssigned
0%
1 Task Description

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
1 Task Description

Modify - Round - Click polyline - round all corners

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

502QCAD (main)Feature RequestLowPoints on line: enter distance instead of number of poi...Assigned
0%
1 Task Description

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

612QCAD (main)Feature RequestLowPlot math functionsAssigned
0%
1 Task Description

Input:

  1. X axis min/max or choose line (?) or center (for polar functions)
  2. function: y = f(x) / polar function: r = f(a)

Output:

  1. function plot
617QCAD (main)Feature RequestLowDifferent dimensions font sizes in the same drawing.Assigned
0%
1 Task Description

Different dimensions font sizes in the same drawing.

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

661QCAD (main)Feature RequestLowAdd support for the DGN formatAssigned
0%
1 Task Description

See OpenDesign news:
“ODA consolidates support for .dgn and .dwg file formats in Teigha”

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
1 Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

680QCAD (main)Feature RequestLowAdditional Export function for Sketchup etc. ....Assigned
0%
1 Task Description

Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

687QCAD (main)Feature RequestLowPlot Stamp optionAssigned
0%
1 Task Description

To add a Plot Stamp option for printing, to have options to print file name, date , time etc...

See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967

720QCAD (main)Feature RequestLowLocked Blocks ....Assigned
0%
1 Task Description

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks” ;-)

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
1 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

786QCAD (main)Feature RequestLowMulti - Breakout toolAssigned
0%
1 Task Description

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

Showing tasks 51 - 100 of 430 Page 2 of 9 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing