|
1705 | QCAD (main) | Feature Request | Low | Connect certain actions and layers | Assigned | |
1 |
Task Description
When dimensioning my drawings I always want the dimensions to be on the dimensions layer. When adding text I want the text to be on the text layer. When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer. When drawing a line segment it almost always is on my outline layer.
So I propose a new option to bind certain actions to certain layers. Whenever those actions are selected the layer should automatically be switched.
I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
1452 | QCAD (main) | Feature Request | Low | Colour opacity option | Assigned | |
1 |
Task Description
Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?
related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715
|
|
609 | QCAD (main) | Feature Request | Low | Clean up tool | Assigned | |
1 |
Task Description
To have a ‘clean up ' tool to:
- eradicate duplicate lines - eradicate stray points - remove empty layers - remove unused blocks
Perhaps with an initial dialog which allows the user to choose what they want to clean up.
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
1282 | QCAD (main) | Feature Request | Low | Changeable color of the selection bar in layer list. | Assigned | |
1 |
Task Description
Changeable color of the selection bar in the layer list. Now the color of the bar is darkblue and the underlaid icons are black and are not readable.
|
|
1810 | QCAD (main) | Feature Request | Low | Change icons from black on white to white on black depe... | Assigned | |
1 |
Task Description
Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window. See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970
|
|
1469 | QCAD (main) | Suggestion | Low | Cartouche automatique | Assigned | |
1 |
Task Description
Would not it be possible to create a kind of template for printing? We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).
Original suggestion:
Bonjour,
Ne serait il pas possible de créer une sorte de template lors de l’impression ? On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
316 | QCAD (main) | Feature Request | Low | Blocks list and selected block | Assigned | |
1 |
Task Description
Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?
(Feature request sounds a little harsh, enhancement proposal would seem more apt.)
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1023 | QCAD (main) | Feature Request | Low | Arrange points on a plan according to variation of dist... | Assigned | |
1 |
Task Description
Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
1789 | QCAD (main) | Suggestion | Low | Application Preferences / General / Performance :0 | Assigned | |
1 |
Task Description
Hi Andrew,
we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.
I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.
Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.
Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.
Just my two cents. ;)
|
|
1337 | QCAD (main) | Feature Request | Low | Alternate units for dimensions | Assigned | |
1 |
Task Description
Add support for alternate units for dimension style, for example to display units in mm and in.
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
680 | QCAD (main) | Feature Request | Low | Additional Export function for Sketchup etc. .... | Assigned | |
1 |
Task Description
Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176
|
|
1888 | dwg2bmp | Feature Request | Low | Add support to disable hatch rendering on "dwg2bmp" | Assigned | |
1 |
Task Description
Hi!
A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.
Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”
Amazing product, thank you so much!
|
|
661 | QCAD (main) | Feature Request | Low | Add support for the DGN format | Assigned | |
1 |
Task Description
See OpenDesign news: “ODA consolidates support for .dgn and .dwg file formats in Teigha”
|
|
1613 | QCAD (main) | Feature Request | Low | Add Orthogonal Option to Angelur DIM Tool ... | Assigned | |
1 |
Task Description
... please see below:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
823 | QCAD (main) | Feature Request | Low | Add Midpoint Handles to Lines and Polylines | Assigned | |
1 |
Task Description
The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality. Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value. It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)
|
|
1099 | QCAD (main) | Feature Request | Low | Add Leader with text and number bubble | Assigned | |
1 |
Task Description
Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.
Currently it takes too mush time to make the leaders with text and number bubbles.
|
|
1100 | QCAD (main) | Feature Request | Low | Add drag dimension (snap) along dimension line | Assigned | |
1 |
Task Description
In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.
This is very useful when the two lines the needs a dimension are close together, or overlapping with another.
Attached is two images one for autocad and one for Qcad
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
1 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2192 | QCAD (main) | Feature Request | Low | Add "Define angle using mouse cursor" to Move and Rotat... | Assigned | |
1 |
Task Description
The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool
|
|
2174 | QCAD (main) | Bug Report | Low | [SOLVED] Numerous shortcomings when exploding Polylines... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7, Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Issues most likely unrelated to OS and installations before 3.25. Related post: https://qcad.org/rsforum/viewtopic.php?&t=7982
Flaws documented in full in attached dxf. The dxf has meaningful Layer States.
4 Columns: - Prior Art - The test cases - Actual results - Results with proposed fix
Tried as many things as I can come up with. Orange: Flaws Red: Errors Green: Good results (or as good as I can get them)
Solution(s) given in attached script explode.js (I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)
In section: “explode polyline into line and arc segments” group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}” All additions, updates & typos are marked with “CVH”, one can textual search for it. Over-documented for sure. Any Eaction is to debug in Windows and is obsolete.
Included PreferencesPage.ui is updated for the all Splines from Text fix Still in consideration: Forcing cubic splines from text to degree 2 ... ... I am rather convinced ...
CVH
|
|
860 | QCAD (main) | Feature Request | Low | "Create Library item from selection" default Path ... | Assigned | |
1 |
Task Description
Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ... ... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources. And QCAD doesn’t remember the last path choice ....
If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.
It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ...
|
|
681 | QCAD (main) | Feature Request | Low | 'Plug-in' for Gear generator | Assigned | |
1 |
Task Description
Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc... To produce 2D templates for all sorts of projects.
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|
|
1811 | QCAD (main) | Feature Request | Low | Zoom 1:1 | Assigned | |
|
Task Description
It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.
Thanks!
|
|
1506 | dxflib | Feature Request | Low | writeVPort parameters | Assigned | |
|
Task Description
Add parameters to the function DL_Dxf::writeVPort. This way users will be able to specify the desired viewport.
Is the github the official repository? Are pull requests sent there accepted?
|
|
1863 | ECMAScript | Feature Request | Low | WidgetFactory.saveState: save state of checkable QGroup... | Assigned | |
|
Task Description
QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf
|
|
1754 | QCAD (main) | Suggestion | Low | When Selecting multiple blocks that contain the same at... | Assigned | |
|
Task Description
When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.
|
|
637 | QCAD (main) | Feature Request | Low | Viewports / View List | Assigned | |
|
Task Description
1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?
2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071
|
|
1915 | QCAD (main) | Suggestion | Low | Viewport does not rotate view-port when changed in pape... | Assigned | |
|
Task Description
To reproduce
1. Select a new view-port in model-space 2. Select the appropriate paper-space 3. When the paper space opens change the angle of the viewport.
Actual
The object in the viewport changes but the viewport itself remains unchanged
Expected
That both the view-port and the object changes angle as the angle is updated
Motivation
If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter
Workaround
1. Select the view-port per normal in model-space 2. Open the paper-space and set the wanted angle but do not place the view-port in paper space 3. Abort the placement on paper-space and redo the whole operation
Once the paper space is opened again the view-port will have the chosen angle
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
|
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
|
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
721 | QCAD (main) | Bug Report | Low | Vertical dimensions imported as horizontal dimensions | Assigned | |
|
Task Description
Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem. Problem occurs in QCAD 2.2 and QCAD 3.0.
|
|
802 | QCAD (main) | Feature Request | Low | User defined toolbar | Assigned | |
|
Task Description
It would be a nice feature to be able to define your own toolbar.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393
|
|
724 | QCAD (main) | Feature Request | Low | Useless reference point entering when moving relatively | Assigned | |
|
Task Description
Hi, this is a usability feature request:
If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.
It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).
Thx
|
|
827 | QCAD (main) | Feature Request | Low | Use Properties Editor to define Properties of newly cre... | Assigned | |
|
Task Description
If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
|
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|