QCAD Bugtracker

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tuğalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...

Implement a multiline tool.

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

Hello,

I have got a dwg file from architect, which I can open, but I get “Invalid symbol table name” when I try to save it. I do not know which software was used to create it.
I have tried to change all spaces and national characteds in block and layers names as advised elswhere, but that didn’t help.

Lp
Tomaž

Text that has been applied to a drawing with the ‘bold’ attribute sometimes appears as regular, un-bolded, text. When increasing the viewing magnification one will see the text adopt the bold attribute, but at smaller sizes the text appears without the bold. This can be confusing causing the draftsman to double-check whether the text had the bold attribute.

Current version: 3.26.2

Previous version: 3.22.1 (note: in this version, bolded text appeared bold at all viewing magnifications.)

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.