|
868 | QCAD (main) | Feature Request | Low | Option to save to dwt - drawing template. | Assigned | |
|
Task Description
An option to save to dwt (drawing template) would be so very useful. Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=8237#p8237
|
|
873 | QCAD (main) | Feature Request | Low | command line does not accept distance value for funtion... | Assigned | |
|
Task Description
In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).
|
|
894 | QCAD (main) | Feature Request | Low | Modify - Clip to Rectangle: copy area to clipboard | Assigned | |
2 |
Task Description
New mode for clip to rectangle: copy contents of rectangular area to clipboard.
|
|
895 | QCAD (main) | Feature Request | Low | Area calculation based on existing entities | Assigned | |
4 |
Task Description
Use case:
Start tool
Choose one entity of the contour
If contour is closed, area of closed contour is calculated an printed in the command line history
Configuration parameters: segment length for arc interpolation
|
|
901 | QCAD (main) | Feature Request | Low | Dimension text styles | Assigned | |
|
Task Description
Support custom dimension text styles for imported DXF / DWG files.
|
|
908 | QCAD (main) | Feature Request | Low | Library Browser Block Delete Function | Assigned | |
2 |
Task Description
It would be very helpful if the library browser had a delete function.
I know that this can be very risky for some people, but it is the easiest way to see clearly what you delete.
Regards Henry
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
923 | QCAD (main) | Feature Request | Low | Diagramming (Intelligent Orthogonal Connectors) | Assigned | |
2 |
Task Description
Hi,
With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.
|
|
927 | QCAD (main) | Feature Request | Low | Further options for the 'Add Measurement' tools | Assigned | |
2 |
Task Description
Absolutely love the new options for adding the measurements in the current drawing.
I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.
Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!
|
|
936 | QCAD (main) | Feature Request | Low | Disproportional scaling of block references | Assigned | |
|
Task Description
XP/32
... doesn’t works proper at circles and ellipses.
Circles: the scale works only proportional even though I have the options for x and y. Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
952 | QCAD (main) | Feature Request | Low | Dimensions: manually control arrow position | Assigned | |
3 |
Task Description
See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.
The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.
|
|
962 | QCAD (main) | Feature Request | Low | Default save / open directories | Assigned | |
1 |
Task Description
Add the option to use a fixed path for the save to, open and CAM export directories.
(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)
|
|
964 | QCAD (main) | Feature Request | Low | New tool request - 'Break Out Arc' from Circle | Assigned | |
|
Task Description
It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.
Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
6 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
979 | QCAD (main) | Feature Request | Low | Text dialog: insert special characters in simple text m... | Assigned | |
1 |
Task Description
The Omega button to insert special characters is only available in rich text mode. Make it available in simple text mode as well.
|
|
986 | QCAD (main) | Feature Request | Low | Detect duplicates - only on selected area | Assigned | |
1 |
Task Description
It would be useful to have an additional option to only detect duplicates on user defined selection of drawing. Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145
|
|
990 | QCAD (main) | Feature Request | Low | Default Names for Custom Property ... | Assigned | |
|
Task Description
Property Editor - Geometry - Custom - Add Custom Property
It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names. Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point
If I have predefined Names - I have just to fill out the value
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
992 | QCAD (main) | Feature Request | Low | selections to stay selected when projecting to an isome... | Assigned | |
|
Task Description
My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing! Maybe an extra button could be added in the ISO options?
|
|
995 | QCAD (main) | Feature Request | Low | Property editor: add 'edit block' button | Assigned | |
1 |
Task Description
Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.
|
|
1005 | QCAD (main) | Feature Request | Low | Making use of mouse buttons configurable | Assigned | |
|
Task Description
According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.
|
|
1009 | QCAD (main) | Feature Request | Low | Layer Order is Alphabetical vs the Order Defined Origin... | Assigned | |
|
Task Description
It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.
|
|
1023 | QCAD (main) | Feature Request | Low | Arrange points on a plan according to variation of dist... | Assigned | |
2 |
Task Description
Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances
|
|
1026 | QCAD (main) | Feature Request | Low | Selection Filter also present in the Menu "Selection" | Assigned | |
|
Task Description
It would be nice to have the Selection Filter also present in the Menu / Selection List
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1034 | QCAD (main) | Feature Request | Low | Supplementary note added to Application preferences dia... | Assigned | |
|
Task Description
I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.
Please see topic for more details and feedback:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724
|
|
1036 | QCAD (main) | Feature Request | Low | Layer list - drop down menu option | Assigned | |
|
Task Description
In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!
|
|
1044 | QCAD (main) | Feature Request | Low | Radian measure symbol for Geometry labeling ... | Assigned | |
2 |
Task Description
We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...
It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.
|
|
1046 | QCAD (main) | Feature Request | Low | Please add script bindings for Qt 4.8.6 and 5.2.1 | Assigned | |
|
Task Description
These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.
(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)
Thanks,
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
1080 | QCAD (main) | Feature Request | Low | Bitmap export: calculate size based on bounding box inc... | Assigned | |
|
Task Description
I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y. The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side). Additionally in the export there is a frame around the image, making it 3.12 + 2*frame. The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.
|
|
1090 | QCAD (main) | Feature Request | Low | Export only selected layers to SVG and/or export each l... | Assigned | |
2 |
Task Description
When exporting to SVG it would be helpful if there was a selection of layers to export. E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.
As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step. The layer names could be used as (part of the) default file names during the export. E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.
|
|
1092 | QCAD (main) | Feature Request | Low | New tool: draw trace entities | Assigned | |
2 |
Task Description
Add tool to construct new trace entities. Trace entities can currently only be loaded from DXF/DWG.
|
|
1093 | QCAD (main) | Feature Request | Low | Edit Layer attributes by double-clicking on entry in la... | Assigned | |
2 |
Task Description
When double clicking on an entry in the layer list just nothing happens. I would prefer if this would directly open the layer attributes dialog to change color/name etc.
|
|
1098 | QCAD (main) | Feature Request | Low | Support for set of layers | Assigned | |
|
Task Description
Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?
It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.
In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness
|
|
1099 | QCAD (main) | Feature Request | Low | Add Leader with text and number bubble | Assigned | |
4 |
Task Description
Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.
Currently it takes too mush time to make the leaders with text and number bubbles.
|
|
1100 | QCAD (main) | Feature Request | Low | Add drag dimension (snap) along dimension line | Assigned | |
3 |
Task Description
In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.
This is very useful when the two lines the needs a dimension are close together, or overlapping with another.
Attached is two images one for autocad and one for Qcad
|
|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1104 | QCAD (main) | Feature Request | Low | Printing: Add support for page range | Assigned | |
1 |
Task Description
When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.
|
|
1106 | QCAD (main) | Feature Request | Low | Add support for wipeouts | Assigned | |
3 |
Task Description
Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.
|
|
1107 | QCAD (main) | Feature Request | Low | Splines: add / remove control points of existing spline... | Assigned | |
2 |
Task Description
Tools to add control points to existing splines and remove control points.
|
|
1111 | QCAD (main) | Feature Request | Low | Option to swap right/middle mouse button | Assigned | |
|
Task Description
Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag. So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad. Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.
So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
5 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
1126 | QCAD (main) | Feature Request | Low | Suggestion for Dimension Location setting | Assigned | |
3 |
Task Description
Please seet topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124
|
|
1127 | QCAD (main) | Feature Request | Low | Leaders: spline shaped | Likely to be implemented | |
2 |
Task Description
Add support for spline shaped leaders
|
|
1128 | QCAD (main) | Feature Request | Low | Text: automatically wrap text at text box width | Assigned | |
2 |
Task Description
Add support for automatic text line wrapping for multiline text entities.
|
|
1130 | QCAD (main) | Feature Request | Low | Offset Polyline from both sides at once | Assigned | |
|
Task Description
It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.
Maybe a similar feature could be added to the line -parallel tools?
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
2 |
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|