QCAD Bugtracker

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet

Regards,
CVH

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

QCAD Professional
Windows 7, Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Issues most likely unrelated to OS and installations before 3.25.
Related post:
https://qcad.org/rsforum/viewtopic.php?&t=7982

Flaws documented in full in attached dxf.
The dxf has meaningful Layer States.

4 Columns:
- Prior Art
- The test cases
- Actual results
- Results with proposed fix

Tried as many things as I can come up with.
Orange: Flaws
Red: Errors
Green: Good results (or as good as I can get them)

Solution(s) given in attached script explode.js
(I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)

In section: “explode polyline into line and arc segments”
group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}”
All additions, updates & typos are marked with “CVH”, one can textual search for it.
Over-documented for sure.
Any Eaction is to debug in Windows and is obsolete.

Included PreferencesPage.ui is updated for the all Splines from Text fix
Still in consideration: Forcing cubic splines from text to degree 2 ...
... I am rather convinced ...

CVH

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

Select the previously selected entities.

The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.

An option for unidirectional dimensions, in addition to the default aligned dimensions.

Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.

See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170

The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool

QCAD Professional
Win7 installer 32 bit
Version: 3.25.2.13 (3.25.2.13)
Internet: QCAD.org
Build Date: Feb 12 2021
Revision: cad2d36
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

In the file provided one would expect *VARIES* in the property editor under custom properties when selecting 2 or more entities.
The key list is reduced to what keys are common to the multiple selection. (Here 3)
The values displayed are inconsistent depending the selection.

Select All » 3 custom properties of line 3
Select the 3 vertical » 3 custom properties of line 2
Select the first vertical and the diagonal » 3 custom properties of line 1
Select all but the first vertical » 3 custom properties of line 3
And so on ...

Regards,
CVH

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

During saving file I’m getting information “Invalid Symbol Table name error”. Problem is already known so i tried to follow the instructions given to other users by you. I’ve tried to change spaces to _ symbol in the layers names or deleting polish specific letters but there was no change. I was able to find out that the problem is related only to four layers named: A_ciany... When I delete these layers I’m able to save file without error message. Can you tell me what’s wrong in these layers? I’ve tried to change names of these layers but problem still exists. Best regards.

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.