QCAD Bugtracker

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

While updating or regenerating toolpath on the attached dxf file I repeatedly get the warning message in the attached jpg file. If I keep clicking OK then the toolpath is successfully generated. This did not happen in version 3.23.0 with the same file.

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

FlexPainter works in the Pro version of QCad but not in the Comunity one.
If it’s not supposed to works in the latter, maybe, it would be better to remove it from the menu (Misc > Script Examples > Mathematics).

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

I can’t print from Q-cad in Win 10 latest update. Q-cad says it has sent it to the printer but does not print.
To make it work I print to a PDF file then send it to the printer. I was able to print prior to the update.

I have checked and rechecked the settings in Q-cad as well as my Firewall and printer. All other programs print ok.

I tried printing from my Win 7 computer and all works fine.

Please advise.

Trim, or round do not work between the green line and the magenta arc. The line properties do not report the length correctly.

Info - distance reports the distance between the end point of the magenta arc and the start point of the red arc as .1534. the Property editor reports the green line length as .257.

If the length of the green line is edited to .5 inches then trim and round work properly, and the green line length is reported properly. The other line/arc intersections have been edited in this manner.

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden.
It is not happening with all the block.

implement

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

Insert field into drawing that displays current date, file name, ...

Modify - Round - Click polyline - round all corners

command line arguments: allow class name after -exec

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

Blocks: moving complex blocks with drag and drop should show bounding box as preview

A missing feature in my work are logical operations (combine, intersect, ..) for polylines

Example:
Draw some elements, select them, say combine. The result will be the outline of all elements.

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht

To add the option to ‘print only’ selected area in a drawing.

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren.
Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste).
Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.

So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.

Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären.
Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.

Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.

Beispiel:
Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.

Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.

Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.

Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

Input:

1. X axis min/max or choose line (?) or center (for polar functions)
2. function: y = f(x) / polar function: r = f(a)

Output:

1. function plot

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature ....

Different dimensions font sizes in the same drawing.

To have the option to set your own ‘user defined’ line weight.

Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally.
See attached image:
Possibly this option could be added to the Label drop down menu.

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.