FS#2167 - Comma format decimal separator fails ZSafety CAM configurations
QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown
Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format.
Didn’t try anything else yet
Regards,
CVH
Changing the input decimal separator requires a restart of QCAD (the appropriate warning has been added for the next release).
Andrew,
QCAM trial!
I didn't change anything !!!
My local format is a comma.
My drawings under QCAD are with a comma.
For Coordinate Format I use comma and semicolon.
Under QCAD PRO since ever.
QCAM has no individual format setting so far as can see.
Most settings are shared with my QCAD PRO installation.
My numpad decimal point inserts a comma as I type numbers.
The CAM configuration UI RMathLineEdit fields accept the comma format.
My CNC driver soft requires the dot format.
The values entered in the settings with the comma format get truncated.
It would not be a reboot issue.
Rebooted QCAD PRO & QCAD/QCAM Trial both about 20-30 times each before the report.
Regards,
CVH
Please attach your DXF file (with tools / toolpaths) as I cannot reproduce, thanks.
Not a reboot issue,
Not a QCAD PRO issue
Please
tryoutComma.nc (0.2 KiB)
tryout.dxf (98.9 KiB)
tryout3.png (130.7 KiB)
tryout2.png (63.6 KiB)
tryout1.png (58.7 KiB)
And the dxf saved under CAM
+ QCADiniSnippet
QCADiniSnippet.txt (0.5 KiB)