- Status Closed
- Percent Complete
- Task Type Bug Report
- Category QCAD/CAM
-
Assigned To
Andrew - Operating System All
- Severity Low
- Priority Very Low
- Reported Version 3.21.3
- Due in Version Undecided
-
Due Date
Undecided
- Votes
- Private
Attached to Project: QCAD Bugtracker
Opened by H. Stiekema - 02.02.2019
Last edited by Andrew - 15.03.2019
Opened by H. Stiekema - 02.02.2019
Last edited by Andrew - 15.03.2019
FS#1850 - Toolpath error
Hi Andrew,
While generating a toolpath I stumbled upon an odd error.
Hi Andrew,
Fidling around with trial and error, I have managed to find some causes, but not all.
780524B_BotCopLaser_Pt1.DXF (2.76 MiB)
There are some issues here:
- Radius correction (inside / outside) is used for line fonts. Inside / outside only makes sense for closed profiles.
- The line fonts that come with QCAD were originally made for screen display and are not precise enough for effective CAM processing. This will be adjusted in a future version, possibly the next version.
Unfortunately the toolpath error is not fixed.
More likely I think there is a issue here.
Probably still an issue