QCAD Bugtracker

  • Status Closed
  • Percent Complete
    100%
  • Task Type Bug Report
  • Category QCAD/CAM
  • Assigned To
    Andrew
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version 3.21.3
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: QCAD Bugtracker
Opened by H. Stiekema - 02.02.2019
Last edited by Andrew - 15.03.2019

FS#1850 - Toolpath error

Hi Andrew,

While generating a toolpath I stumbled upon an odd error.

(application/pdf)    5_44_CAM_RS274NGC_Les12.pdf (346.9 KiB)
   780524B_BotCopLaser_Pt1.DXF (1.71 MiB)
Closed by  Andrew
15.03.2019 11:04
Reason for closing:  Fixed
01.04.2019 : A request to re-open the task has been made.
H. Stiekema commented on 04.02.2019 15:55

Hi Andrew,

Fidling around with trial and error, I have managed to find some causes, but not all.

(application/pdf)    5_44_CAM_RS274NGC_Les12.pdf (510.4 KiB)
   780524B_BotCopLaser_Pt1.DXF (2.76 MiB)
Admin
Andrew commented on 15.03.2019 11:04

There are some issues here:
- Radius correction (inside / outside) is used for line fonts. Inside / outside only makes sense for closed profiles.
- The line fonts that come with QCAD were originally made for screen display and are not precise enough for effective CAM processing. This will be adjusted in a future version, possibly the next version.

H. Stiekema commented on 26.03.2019 15:05

Unfortunately the toolpath error is not fixed.

More likely I think there is a issue here.

(application/pdf)    BUG_QCAD_20190326.pdf (341.5 KiB)
H. Stiekema commented on 01.04.2019 07:24

Probably still an issue

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing