Sorry for the silly question as I'm new to QCad.
I've setup a document in inches and the dimensions as architectural.
I drew a line 21' long. The length displays properly in the display from 0,0 to 21'-0". Then added a dimension to test dimensioning. The dimension shows the line to be 105'-0" long.
Lines of different lengths are also wildly off. I'm sure I've setup something incorrectly. Suggestions?
Line length and dimensions are wildly different
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Line length and dimensions are wildly different
Hi kplumb - welcome to the QCAD Forum.
Note: When you launch the Dim tools an option bar pops up with the possibility to use a scale. Make sure it is set to 1:1.
If that doesn't solves the issue please attach the drawing to this post. Thanks
Your drawing Unit is inch - your line is 21' what means 252". Where can you seen this "length display" from 0,0 to 21'-0"? Ruler?
Note: When you launch the Dim tools an option bar pops up with the possibility to use a scale. Make sure it is set to 1:1.
- Husky-2018.12.01-01.png (9.04 KiB) Viewed 2453 times
If that doesn't solves the issue please attach the drawing to this post. Thanks
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."