Hi All
I have a collection of hatch patterns spread over quite a few pages
So after a little bit of persuasion I have decided to upload a complete set to date.
Since build 3.24 Qcad & Qcad/CAM some of my patterns have been included so I see no need to include the "PAT" files but I have included a catalogue for your convenience.
These are the PAT files to date uploaded on this topic, I will continue to upload single patterns but when I get to the next full page I'll upload a new catalogue including an updated set of "PAT" files.
.
These are my Hatch files that are already included in Qcad..
.
These are my forum uploads not included in Qcad.
.
These are all the PAT files from my forum uploads Metric & Imperial..
.
I hope this makes it easier for you all..
Cheers
John
Free Hatch Patterns by John Hyslop
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files, scripts and screenshots.
Post one question per topic.
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Free Hatch Patterns by John Hyslop
Last edited by John Hyslop on Thu Dec 07, 2023 8:01 am, edited 2 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Hi All
I thought I may as well add these too, then you'll all have a complete catalogue of available hatch patterns..
Qcad Standard Original Hatch Pattern Collection
The hatch patterns in this catalogue are included in Qcad & Qcad/Cam prior
to build 3.24 (© 2011-2022 RibbonSoft, GmbH.) before any of my additions..
.
. .
.
Cheers
John Hyslop
I thought I may as well add these too, then you'll all have a complete catalogue of available hatch patterns..
Qcad Standard Original Hatch Pattern Collection
The hatch patterns in this catalogue are included in Qcad & Qcad/Cam prior
to build 3.24 (© 2011-2022 RibbonSoft, GmbH.) before any of my additions..
.
. .
.
Cheers
John Hyslop
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns
Hi All
This topic has been tidied up as requested "thank you"
Here are the images relating to the downloads above, I've added these as a reference so they can be viewed online prior to any downloads, you can then easily see which patterns you may be interested in without downloading them blindly.
I hope this makes it easier for anyone interested in them.
The files below are in PNG format ... and are named appropriately..
Happy Hatching
John Hyslop
Available in page PDF format in the first two posts. Available in page PDF format in the first two posts. Available in page PDF format in the first two posts.
This topic has been tidied up as requested "thank you"
Here are the images relating to the downloads above, I've added these as a reference so they can be viewed online prior to any downloads, you can then easily see which patterns you may be interested in without downloading them blindly.
I hope this makes it easier for anyone interested in them.
The files below are in PNG format ... and are named appropriately..
Happy Hatching
John Hyslop
Available in page PDF format in the first two posts. Available in page PDF format in the first two posts. Available in page PDF format in the first two posts.
Last edited by John Hyslop on Thu Dec 07, 2023 8:19 am, edited 8 times in total.
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
-
- Premier Member
- Posts: 474
- Joined: Mon Sep 30, 2019 6:21 am
- Location: Melbourne - Australia
Re: Free Hatch Patterns by John Hyslop
Many Thanks Husky
IF IT IS TO BE IT IS UP TO ME [ Ten most powerful 2 letter words ]
Re: Free Hatch Patterns by John Hyslop
You're quite welcome!
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."