|
1241 | QCAD (main) | Bug Report | Medium | Options tool bar fields not editable, no interaction wi ... | Closed | |
|
Task Description
Likely affects Windows Vista, 7, 8.
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3588 http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3587
Caused by update from Qt 4.7.4 to Qt 4.8.7
|
|
1243 | QCAD (main) | Bug Report | Medium | Printing / PDF Export: points offset | Closed | |
|
Task Description
Hi ! im’ trying the 3.9.6 base version, and i have found a problem in printing/exporting..
To replicate the bug: Try to draw a simple form, for ex a circle, and draw a center of this circle using POINT function.
Now if you make a print preview, then CENTER the circle in the page and try to export to pdf or print, the circle and the POINT (center) are ofsetted !!
i have try to make the same operation with 3.9.5 and i have no problem !!!
|
|
1268 | QCAD (main) | Bug Report | Medium | DXF/DWG import: cannot open file with custom linetypes | Closed | |
|
Task Description
If custom complex linetypes embedded in a file refer to a font that is not available for linetype shapes, the file cannot be opened.
Error: Can not open file Please check your access rights, file format and file extensions
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3718
|
|
1293 | QCAD/CAM | Bug Report | Medium | Crash when snapping to intersection points between 3d l ... | Closed | |
|
Task Description
I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.
Steps to reproduce: Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.
The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.
Cause: 3D lines with x1==x2, y1==y2 but z1!=z2
|
|
1294 | dxflib | Bug Report | Medium | Hatches scale differently now from earlier releases | Closed | |
|
Task Description
Something with hatching changed between 3.10 and 3.12; Changelog for 3.11.2 states: “Add support for hatch patterns defined per entity”. That may be?
Attached drawing from an older version; open in current and see a black box where there should be earth. Change scaling of hatch from 10 to 254 and it will be exactly the same it was when saving the file.
Curiously, that is like swapping inches and mm? Looking into prefs, there is a new drop down: “Messsytem für Linien und Schraffuren” and it read “imperial”; making it metric and bingo, my drawing looks as intended!
This is bad, because each drawing has to be changed! I changed the application default drawing setting to metric and the existing drawing still had imperial set…
Probably a heuristic was on order? If the drawing does not specify the new setting, and the drawing units is metric, use metric?
|
|
1347 | QCAD (main) | Bug Report | Medium | Point style bug. | Closed | |
|
Task Description
Hi ! i have find another strangeware about points.. if you set a different point style in program options, on the display the style is correct, but when you try to print or export the drawing, the points are printed as default “point” (little black circle).
|
|
1348 | QCAD (main) | Bug Report | Medium | Points move during print/PDF-export | Closed | |
|
Task Description
Points move by a constant offset relative to the rest of the drawing when printing or exporting to PDF.
This is the exact same bug as FS#1243 , which was reportedly fixed in version 3.9.7 with commit https://github.com/qcad/qcad/commit/9c9d7bbc3fd845b8475ff12a919ad8e86bbaeb1f, but has resurfaced in version 3.12.4 (and possibly earlier versions that I have not tested).
To replicate the bug, create a simple drawing with points and lines then print or export to PDF, and notice that the points have moved relative to the lines or have disappeared off of the page entirely.
Tested with Arch Linux, 64 bit; QCAD version 3.12.4 using the prebuilt binaries supplied from the qcad.org download site.
|
|
1353 | QCAD (main) | Bug Report | Medium | Text rendering: subscripts and superscripts display | Closed | |
|
Task Description
Text with subscripts (e.g. “S\S^3;”) is display incorrectly with the latest version on both Mac OS X and windows 64-bit.
The subscript (”3”) is displayed before the normal text (”S”).
I have been using subscripts to indicate electrical switch types on my blue prints.
It appears that superscripts are also being displayed incorrectly.
|
|
1357 | QCAD (main) | Bug Report | Medium | Can't open files with special characters in their names | Closed | |
|
Task Description
When opening a .dxf file saved by QCAD with a name containing a special characters (tested with diacritics), it fails with the following message:
Cannot open file
'E:/tèst1.dxf'
Import failed.
How to reproduce: 1 - Save a file (content doesn’t matter, it’s the same with an empty file and a file containing data) using the name “tèst1.dxf” 2 - Try to open the file 3 - Error message
What is expected: The file open.
Note that the problem doesn’t lie in the “save” step: the same file, once renamed to “test1.dxf” opens fine.
|
|
1442 | QCAD (main) | Bug Report | Medium | Imported and saved dimensions reference empty blocks | Closed | |
|
Task Description
- Import drawing from other CAD application with dimension blocks (*D..) - Save file with QCAD - Dimension blocks are exported to drawing file but are empty which can break compatibility with other products
|
|
1564 | QCAD/CAM | Bug Report | Medium | QCAD/CAM: black main window or main window not painted ... | Closed | |
|
Task Description
QCAD/CAM version 3.16.7.1 (snapshot release)
QCAD/CAM version 3.16.7.1 for Ubuntu Linux starts up with a totally black screen with only the title bar showing. By clicking around at the top of the screen I can get the menus to drop down and appear over the blank black screen. That is how I captured all the version information below. QCAD/CAM version: 3.15.5.0 for Ubuntu Linux starts with all the normal screen graphics appearing normally. I labeled this bug report as critical because QCAD/CAM is unusable on Ubuntu Linux, but for me it is not so critical since I can use the Windows version.
Versions QCAD version: 3.16.7.1 Date: Mar 22 2017 Qt version: 5.8.0 Compiler version: gcc 4.8.1 Build Date: Mar 22 2017 Revision: 17a80fac27c3ae6aa68cd4ee15ffa4f3e2ab0a9a
Architecture: x86_64 OS: Linux OS version: Unknown
Locale QCAD locale: en Name: en_US Country: 225 Country name: United States Language: 31 Language name: American English Script: 7 Script name: Latin Decimal point: 46 Negative sign: 45 Positive sign: 43 Text direction: 0 System codec: UTF-8
Arguments: /home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin
Plugins Description=CAM tools. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadcamscripts.so ID=CAM License=Proprietary Name=CAM NamePostfix=/CAM PurchaseURL=http://ribbonsoft.com/add-ons/qcadcam-purchase QtVersion=5.8.0 SplashOverride=:/scripts/Cam/splashscreen.png SplashOverride@2x=:/scripts/Cam/[email protected] URL=http://ribbonsoft.com/add-ons/qcadcam Version=3.16.7.1
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddwg.so ID=DWG License=Proprietary Name=QCAD Pro PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0 SystemCodePage=0 URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1 (Teigha® 4.02.2.0)
Description=Import/export support for the DXF format. Based on dxflib. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddxf.so ID=DXF License=GPLv2+ Name=DXF QtVersion=5.8.0 URL=http://www.qcad.org Version=3.16.7.1 (dxflib 3.12.2.0)
Description=OpenGL ES 3D display. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadgles3d.so ID=GLES License=Proprietary Name=QCAD Pro PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0 URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1
Description=Integrated help browser. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadhelp.so ID=HELP License=Proprietary Name=QCAD Pro QtVersion=5.8.0 URL=http://www.ribbonsoft.com Version=3.16.7.1
Description=Polygon clipping, boolean polygon operations, path offset. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadpolygon.so ID=POLYGON License=Proprietary Name=QCAD Pro PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0 URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1
Description=QCAD Professional tools. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadproscripts.so ID=PROTOOLS License=Proprietary Name=QCAD Pro NamePostfix= Professional PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0 URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1
Description=Polygon triangulation. FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadtriangulation.so ID=TRIANGULATION License=Proprietary Name=QCAD Pro PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0 URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1
Environment LC_TIME=en_US.UTF-8 DESKTOP_SESSION=default SSH_AGENT_PID=1743 XMODIFIERS=@im=ibus LOGNAME=dave QT_ACCESSIBILITY=1 PAPERSIZE=letter HOME=/home/dave LC_NUMERIC=en_US.UTF-8 XDG_DATA_DIRS=/usr/share/default:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop XDG_VTNR=2 SHELL=/bin/bash XDG_SEAT=seat0 GIO_LAUNCHED_DESKTOP_FILE=/home/dave/Desktop/Ribbonsoft-qcad.desktop WINDOWPATH=2 QT_IM_MODULE=ibus XDG_SESSION_TYPE=x11 XDG_RUNTIME_DIR=/run/user/1000 LC_MEASUREMENT=en_US.UTF-8 LC_TELEPHONE=en_US.UTF-8 XDG_CURRENT_DESKTOP=GNOME UNICODEMAP_JP=cp932 DEFAULTS_PATH=/usr/share/gconf/default.default.path LC_PAPER=en_US.UTF-8 XAUTHORITY=/run/user/1000/gdm/Xauthority LC_ADDRESS=en_US.UTF-8 LC_IDENTIFICATION=en_US.UTF-8 QT_STYLE_OVERRIDE=gtk LC_NAME=en_US.UTF-8 GIO_LAUNCHED_DESKTOP_FILE_PID=13310 LC_MONETARY=en_US.UTF-8 XDG_SESSION_DESKTOP=default GTK_MODULES=gail:atk-bridge XDG_MENU_PREFIX=gnome- XDG_SESSION_ID=1 QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1 XDG_CONFIG_DIRS=/etc/xdg/xdg-default:/etc/xdg DISPLAY=:1 LD_LIBRARY_PATH=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64 PWD=/home/dave USER=dave SHLVL=1 _=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin MANDATORY_PATH=/usr/share/gconf/default.mandatory.path LANG=en_US.UTF-8 SSH_AUTH_SOCK=/run/user/1000/keyring/ssh DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-S2ePMZG3dG,guid=e590a63ac7ca3b971f776cae58d663c0 GDMSESSION=default GNOME_DESKTOP_SESSION_ID=this-is-deprecated SESSION_MANAGER=local/OPA:@/tmp/.ICE-unix/1681,unix/OPA:/tmp/.ICE-unix/1681 USERNAME=dave PATH=/home/dave/bin:/home/dave/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
|
|
1608 | QCAD (main) | Bug Report | Medium | Unsupported XData type NOT imported | Closed | |
|
Task Description
Unsupported XData type NOT imported errors on loading DWG files. Resulting lines in image are not drawn correctly. See details and sample file in forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=18223#p18223
|
|
1646 | QCAD/CAM | Bug Report | Medium | 3.18 has a HATCH issue | Closed | |
|
Task Description
If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.
But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.
|
|
1657 | QCAD (main) | Bug Report | Medium | Edit > Drawing Preferences > Printing > Page: no effect ... | Closed | |
|
Task Description
Printer settings cannot be changed for model space.
|
|
1733 | QCAD (main) | Bug Report | Medium | Open DXF just written by qcad crashes qcad | Closed | |
|
Task Description
I am a new qcad pro user and created a simple drawing and saved as DXF R27 and closed the app. I reopen the app and open that DFX and the app crashes. However, I can import it. I suspect (without any evidence) that the text in the dimension of the drawing is the problem. Perhaps this issue is like #1261
Process: QCAD-Pro [97927] Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro Identifier: org.qcad Version: 3.19 (3.19.2) Code Type: X86-64 (Native) Parent Process: ??? [1] Responsible: QCAD-Pro [97927] User ID: 501
Date/Time: 2018-04-11 18:07:15.937 -0700 OS Version: Mac OS X 10.12.6 (16G1314) Report Version: 12 Anonymous UUID: 1EBA0D43-4553-C6E8-6F6A-1A9F3992052D
Sleep/Wake UUID: 86FC779B-AD43-426E-9FFA-4AFBFD6EFC8A
|
|
1736 | QCAD (main) | Bug Report | Medium | Draw > Image: broken | Closed | |
|
Task Description
Draw > Image broken due to UI file resource not being found.
|
|
1737 | QCAD (main) | Bug Report | Medium | Block > Attributes > Define Block Attribute: broken | Closed | |
|
Task Description
Broken due to UI file resource not being found.
|
|
1747 | QCAD (main) | Bug Report | Medium | Scaling w 2 ratios fails to scale polyline arc | Closed | |
|
Task Description
Scaling without keeping the aspect ratio fails to scale an arc to an ellips when this is part of a polyline.
Discovered while documenting feature request ‘Skewing’
CVH
|
|
1750 | QCAD (main) | Bug Report | Medium | trimming polylines | Closed | |
|
Task Description
Trimming polylines especialy those with a string of small segments should be done at the intersection of those polylines. Now trimming is done with the seggments that where the nearest when selecting the two polylines.
|
|
1773 | QCAD (main) | Bug Report | Medium | File > PDF Export / SVG Export / Bitmap Export: file na ... | Closed | |
|
Task Description
Configure QCAD to use native file dialogs Load file Export file as PDF, SVG, Bitmap File name suggested by file dialog is drawing file which means user might accidentally overwrite drawing file.
|
|
1820 | QCAD/CAM | Bug Report | Medium | CAM Export: exporting text entities broken | Closed | |
|
Task Description
Hi Andrew,
Kubuntu, QCAD/CAM 3.21.3
Font Standard. Selected as ‘single line’ font for engraving with mill or laser.
While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.
In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?
Could this misallignment also traps Exporting?
|
|
1840 | QCAD (main) | Bug Report | Medium | Edit > Paste along entity: endless loop | Closed | |
|
Task Description
Ich habe im Snapshot 3.21.3.14 unter macOS einen Fehler gefunden, der QCAD in eine Endlosschleife führt, sodaß QCAD nicht mehr antwortet. Details siehe unter https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6011#p22435
|
|
1849 | QCAD (main) | Bug Report | Medium | paste of spline with scaling of 0 crashes application | Closed | |
|
Task Description
Application crashes when entering 0 in the scale option while pasting a spline.
This is an issue also when entering scale factors of less than 1, as the application immediately crashes when entering the 0 digit. As a workaround for a scale factor of e.g. 0.5, one can enter 1.5 and then edit the 1 digit to 0.
|
|
1868 | QCAD (main) | Bug Report | Medium | Reading ellipse from DXF | Closed | |
|
Task Description
Loading the appended dxf-file should show a circle and an ellipse. The circle is ok. The ellipse gets always an ellipse with center at (0|0), main vertex at (1|0) and ratio of 1.
|
|
1929 | QCAD (main) | Bug Report | Medium | Printing Problem - Preview differs from Printout | Closed | |
|
Task Description
... ? I reported this already some days ago, but the task doesn’t show up in the list? ...
Comparing ‘Drawing’ and ‘Preview’ - o.k. Comparing ‘Preview’ and ‘Printout’ - NOT o.k. ! Elements are missing (Rem: in the QCAD sketch itself, the missing elements are in a separate layer; however, anyway - preview should show the same image as the printout !?)
G.W.
|
|
1938 | QCAD (main) | Bug Report | Medium | Segfault when trying to insert block from library (Fedo ... | Closed | |
|
Task Description
(base) [kforrester@FedoraWorkStation qcad-3.23.0-pro-linux-x86_64]$ ./qcad QCAD version 3.23.0 10:21:34: Debug: calling odInitialize 10:21:34: Debug: dropped global XDATA (no res buf): “ViewportCenter” 10:21:52: Debug: importing file: /home/kforrester/Resilio Sync/Technical/Process Engineering/equipment_tag_and_name.dxf ./qcad: line 9: 3844 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” “$@”
QCAD has unexpectedly quit.
Please use the offscreen platform plugin for headless systems (without a running X11 server): ./qcad -platform offscreen
In addition, you might have to override the default Qt style to prevent the loading of a native desktop style (such as GTK): ./qcad -style plastique
I have tested this in version 3.22.1 too and get the same result. Reverting all the way back to 3.13.1 results in an operable version of qcad when working on the same file and library blocks.
|
|
1951 | QCAD (main) | Bug Report | Medium | QCAD Prof 3.23 does not switch to Finnish keyboard layo ... | Closed | |
|
Task Description
QCAD Professional 3.23.0 is using en_US keyboard layout although I have a Finnish keyboard on Fedora 29. I have not found a way, how to chance the keyboard definition. In Fedora repositories there is QCAD Community Edition 3.22.1, and keyboard definitions there are working OK. Keyboard layout is following Gnu desktop keyboard selection and can be changed on the fly. Wrong keyboard layout makes working very hard, because almost all special keys are in different places, like colon, semicolon, plus, minus, parentheses, slash etc.
|
|
1978 | QCAD (main) | Bug Report | Medium | Mirror is not Flip | Closed | |
|
Task Description
Hi Andrew,
Nosing around in the QCAD Reference Manual I noticed a misperception in the Mirror / Flip commands.
|
|
2054 | QCAD (main) | Bug Report | Medium | Misc > Modify > Flatten Drawing to 2D | Closed | |
|
Task Description
Crash when drawing contains viewports.
|
|
2074 | QCAD Community Edition | Bug Report | Medium | No tile print option | Closed | |
|
Task Description
I’m trying to print a large cad drawing at 1:1 scale. However, when I go into preview to select tile button, it doesn’t exit. First image is my screeen capture, the 2nd is from the online tutorial regarding printing and the button that is missing.
|
|
2113 | QCAD (main) | Bug Report | Medium | wrong objects are selected while selecting region with ... | Closed | |
1 |
Task Description
wrong objects are selected while selecting region with mouse. Actions:Trying to select small rectangle area using mouse while holding left mouse button. (ScreenShot_1.png) Expected result: only objects inside selection rectangle (text, lines, rectangles) are selected. Factual result: objects inside selection rectangle are selected as well as other objects which are farther away (marked with purple arrows in ScreenShot_2.png)
|
|
2200 | QCAD (main) | Bug Report | Medium | Linetype scale is wrong when scaling linetypes by linew ... | Closed | |
|
Task Description
All linetype patterns are displayed too large.
|
|
2388 | QCAD (main) | Bug Report | Medium | CAM module - Tab visibility problem | Closed | |
|
Task Description
Hi, Recently I found out that tabs (CAM module) are only visible on layer 0. If I turn this layer off, all tabs will disappear. It is very inconvenient for someone who create a drawing using multiple layers. Im my case, layer 0 contains the frame and the info table only. When the drawing is ready and verified, I add a layer with a copy of the drawing just for g-code generation. I do it in that way because the drawing sometimes has to be modified for cnc purposes. Please correct this problem.
Tested on: QCAD/CAM Pro 3.27.6 PC with Windows 10.
|
|
2444 | QCAD Community Edition | Bug Report | Medium | Entering letters with diacritics on MacOS in the QCAD T ... | Closed | |
|
Task Description
In order to type a diacritical letter (e.g. with ' (é) or " (ö)), MacOS does not repeat the letter when a key is pressed continuously. Instead a dialog appears which allows the user to select one of the diacritics related to the letter of the key pressed. In QCAD and presumably QT, keeping the key pressed starts typing the letter repeatedly while after the first letter is typed the selector for the diacritical letters appears. So you can still the select e.g. the ü but you have to delete all the u’s that were typed before you were able to release the key.
A stop gap measure is to minimise the ‘key repeat delay’ setting in keyboard preferences so that its easier to stop the repetition in time, but that influences other programs as well.
I suppose this is a QT dependency and hase less to do with QCAD. Still, I wanted to let you know.
Its an ‘acceptable’ nuisance
J
|
|
2454 | QCAD (main) | Bug Report | Medium | inserted jpegs will not 'go to back' properly | Closed | |
|
Task Description
Hi
Long time no see - so long that I’ve had to reregister. I must be getting a bit better (though I only do pretty basic stuff).
I often have to trace an actual paper drawing, so I scan it in as a jpeg and insert in the usual way. For a while now, this has become difficult to do because however often I send the image to back or bring the polyline to the front, just moving my mouse over the photo (not selecting it) makes the line disappear and I’ve got a bit fed up with trying to work around this (I don’t think it was always like this?)
I’ve attached my current example (there’s only a single image in it at the moment), and thank you in advance for your patience and help.
Jackie
|
|
2520 | QCAD (main) | Bug Report | Medium | No Layer Groups | Closed | |
|
Task Description
Layer groups are not present. See attached screenshot and link. In screenshot....3.28 is on the left, 3.29 on the right.
|
|
2559 | QCAD (main) | Bug Report | Medium | File > Open: dxflib preselected | Closed | |
|
Task Description
File > Open should not preselect the dxflib filter but All Files.
Caused by changed order of loading plugins.
|
|
9 | QCAD (main) | Bug Report | Low | RSettings.setValue() doesn't work for "GraphicsViewColo ... | Closed | |
|
Task Description
Context: Needed to set color settings for book images.
"GraphicsViewColors/BackgroundColor""GraphicsViewColors/MetaGridColor"
QCAD3.conf:
BackgroundColor=@Variant(\0\0\0\x7f\0\0\0\aRColor\0\x1\xff\xff\0\0\0\0\0\0\0\0\0\x2)
MetaGridColor =@Variant(\0\0\0\x7f\0\0\0\aRColor\0\x1\xff\xff\xff\xff\xfe\xfe\xfd\xfd\0\0\0\x2)
Setting the alpha channel value and the color mode for RColor doesn’t change anything. Using view.setBackgroundColor() instead works for the background color, but not for other colors such as the meta grid color.
|
|
10 | Book | Bug Report | Low | Book numbering in PDF is incorrect | Closed | |
|
Task Description
The numbers in the book don’t match with the bookmarks numbers in the PDF as shown in Acrobat Reader.
|
|
17 | ECMAScript | Bug Report | Low | RLineEntityPointer doesn't work as function argument of ... | Closed | |
|
Task Description
Script code (SvgExporter.js):
245 // only export entities on main block "*Model_Space":
246 if (realEntity.getBlockId() == this.doc.getBlockId("*Model_Space")) {
247 RFileExporterAdapter.prototype.exportEntity.call(this, entity, false);
248 }
Script debugger exception:
Uncaught exception at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246:
Error: :-1:-1: RExporter: Argument 0 is not of type REntity*.
<native>(RLineEntityPointer(0xb6fb158), false) at -1
<anonymous>(entity = RLineEntityPointer(0xb6fb158), preview = false) at
/home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246
<anonymous>() at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:211
Workaround: Used exportEntity() with ID as argument instead. However there may be other cases where no alternative method is available.
RFileExporterAdapter.prototype.exportEntity.call(this, realEntity.getId());
|
|
18 | QCAD (main) | Bug Report | Low | LineRectangleSize.js: options tool bar: alignment point ... | Closed | |
|
Task Description
Sometimes the popup widget that lets the user choose the alignment point for positioning the rectangle does not close when the user clicks the desired point.
|
|
22 | QCAD (main) | Bug Report | Low | Improve grid info display for imperial units | Closed | |
|
Task Description
For inch, foot, .. the grid info display should for example display “1/128” instead of 0.0078125
|
|
28 | QCAD (main) | Bug Report | Low | Test Recorder | Closed | |
|
Task Description
|
|
33 | QCAD (main) | Bug Report | Low | Prints always to A4 | Closed | |
|
Task Description
Print prints always to A4, regardless of paper size chosen.
|
|
34 | QCAD (main) | Bug Report | Low | Printing tests | Closed | |
|
Task Description
Iterate through all drawings in a directory and create PDFs from them using the same mechanism as for printing.
|
|
39 | QCAD (main) | Bug Report | Low | print of not found (invalid) layer crashes | Closed | |
|
Task Description
"dummy"
Thread [1] 23305 (Suspended : Signal : SIGSEGV:Segmentation fault)
RLayer::getLinetypeId() at 0x898faae
operator<<() at RLayer.cpp:141 0x8df7ce4
REcmaSharedPointerLayer::toString() at REcmaSharedPointerLayer.cpp:1,885 0x8b1ab59
0xb6bd913c
0xb6ac2f68
0xb6ac3058
0xb6b09fb5
0xb69ed8e7
0xb6b083d5
0xb6a5a992
<...more frames...>
|
|
42 | QCAD (main) | Bug Report | Low | Text Dialog: bold / italic main font | Closed | |
|
Task Description
bold / italic check box for main font has no effect
|
|
47 | QCAD (main) | Bug Report | Low | Print preview marks drawing as modified | Closed | |
|
Task Description
Print preview marks drawing as modified
|
|
48 | QCAD (main) | Bug Report | Low | Close drawing from print preview | Closed | |
|
Task Description
Fails if drawing was modified and user wishes to save drawing.
|
|
50 | QCAD (main) | Bug Report | Low | Text dialog: Uncaught exception | Closed | |
|
Task Description
open text dialog
select some characters (for coloring)
click on the “color” button → a pop up windows appears showing all colors
don’t choose a color, but click somewhere outside the pop up window
'chosenAction'"color" |