|
1180 | dxflib | Bug Report | Low | dxflib cannot open files with international characters ... | Closed | |
4 |
Task Description
With dxflib, QCAD cannot open any file with Chinese file name or path name, it popups a “Important Error” dialog. But the writing (”Save As” command) with Chinese file name or path name is of no problem. Does it mean dxflib can only handle single byte characters file name/path name? WinXP, QCAD 3.8.0
|
|
1151 | QCAD (main) | Bug Report | Low | Modify > Chamfer / Round: broken between first and last ... | Closed | |
2 |
Task Description
At closed Polygons: Chamfer / Bevel / Round tools are not proper working at the Start/End corner transition.
see also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3192&p=11358#p11358
|
|
1644 | QCAD (main) | Bug Report | Low | Crash on hide all layers button / mixed layers of diffe ... | Closed | |
2 |
Task Description
Hi!
it occorred to me now several times, that I have been working on 2 or more files simultaneously when suddenly on some operations layers from one file showed up in the other file. nothing was pasted when it happened just many files open, or few files with many layers in them. (about 100 layers, but sometimes also only 10 layers) Today I disabled a single layer in one dxf (A) which caused all layers of the other dxf (B) to show up in the layer list (and the layers that should show up were all gone).
I knew this already from 2 more occurances and tried the best to undo all my changes in (A) before “emergency saving” (A). I closed one of the two dxf files (A), leaving one open (B). Everthing seemed pretty normal again. Then pressing the “hide all layers” button just crashed qcad without any message. That crash on “hide all layers” happened twice today). I can’t reproduce the crash right now, but will add details here when I find something. As far as I remember the bug occured already in qcad 3.17, but I’m now on 3.18.1
thanks :) Martin
|
|
1891 | QCAD (main) | Bug Report | Low | File > Import: import fails | Closed | |
2 |
Task Description
I’m not able to import any dxf or dwg.
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
4 | Book | Bug Report | Medium | Book "CAD Instruction" layout issues | Closed | |
1 |
Task Description
Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.
|
|
257 | QCAD (main) | Bug Report | Low | autosnap to reference point | Closed | |
1 |
Task Description
Autosnap does not recognize the center of a circle as a reference point.
JJ
|
|
536 | QCAD (main) | Bug Report | High | Update RC5 NO icons | Closed | |
1 |
Task Description
After Update to RC5 there are NO icons displayed
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
599 | QCAD (main) | Bug Report | Low | Line tangent to ellipse with start point on minor axis | Closed | |
1 |
Task Description
Line tangent to ellipse with start point on the minor axis of the ellipse produces wrong result.
|
|
652 | QCAD (main) | Bug Report | Low | Arbitrary options toolbar height | Closed | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=2099
|
|
677 | QCAD (main) | Bug Report | Low | Incorrect rendering of the drawings with the dwg2pdf to ... | Closed | |
1 |
Task Description
Incorrect rendered faltering types of lines with the dwg2pdf tool. Some of them: “DOT”, “DOT2”, “CENTER2”, “BORDER2”, “DASHDOT2”, “DIVIDE2”, “DASHED2” and others. Lines are drawn by the “compressed”. But when exporting through the menu “File” → “PDF Export”, lines are drawn as expected! I attach two files as an example.
P.S. Excuse me and “Google Translate” for my English :)
|
|
731 | QCAD (main) | Bug Report | Low | Break out segment: fails in some cases | Closed | |
1 |
Task Description
See fs731.dxf
|
|
732 | QCAD (main) | Bug Report | Low | Text Control Info is displayed in Drawing when imported ... | Closed | |
1 |
Task Description
May relate to 646.
Control Text is Displayed on Drawing created in ACAD. The Text is representing /p as a new line when I think it should be ignored. See QCAD PDF I am unsure what this represents in ACAD. /pxqc;
V3.0.0 Windows 7 64-bit
|
|
735 | QCAD (main) | Bug Report | Low | Angle dimensioning | Assigned | |
1 |
Task Description
See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
794 | QCAD (main) | Bug Report | Low | Applying Solid grid lines - not working | Assigned | |
1 |
Task Description
Windows 3.0.8 Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?
|
|
796 | QCAD (main) | Bug Report | Low | Pasting to current layer results in empty layers being ... | Closed | |
1 |
Task Description
Initial situation: A drawing with two visible layers: One for the outline and one for hidden lines. A second empty drawing with the standard 0 layer.
The bug: When copying the objects from the first drawing and pasting them to the current layer of the second drawing, both layers present in the first drawing are created and are empty. I suppose that’s not the way it was intended. I expected the selected objects being pasted to the current layer and NO extra layers being created.
|
|
809 | QCAD (main) | Bug Report | Low | Hatch modifications and undo | Closed | |
1 |
Task Description
- Draw ellipse - Fill ellipse (solid or hatch) - Rotate ellipse and filling - Undo
→ Angle of ellipse shaped fill is not undone.
Other hatch boundary elements that break or cannot be undone: - splines from fit points - arcs (when only one point is moved, e.g. stretch) - circles (when radius changes, e.g. scale, position changes) - ellipses (when major point changes)
|
|
831 | QCAD (main) | Bug Report | Medium | Multiple words of non-english language in Richtext are ... | Closed | |
1 |
Task Description
Version - 3.1, binary.
If I “Draw text” with text “aaaa bbbb” - it displays correctly, but when I enter “аааа бббб” (with russian keyboard) - I see that “аааа” and “бббб” are displayed one above other - see screenshot.
The same problem is for imported .dxf file with russian texts in it. Problem makes the solution as a whole actually inusable for (at least, some of) russian users.
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
877 | QCAD (main) | Bug Report | Low | Patches to build QCAD 3.2.0.0 on FreeBSD | Closed | |
1 |
Task Description
Hello,
The attached patches are used to build QCAD on FreeBSD.
Notes:
- patch-shared_app.pri adds a dependency to libexecinfo. It is marked as fixed in FS#876 , but still there.
It could be useful also for the other BSDs.
- patch-src_3rdparty_opennurbs_opennurbs_system.h remove malloc.h. It is marked as fixed in FS#875 , but still there.
- patch-src_3rdparty_3rdparty.pro, patch-src_core_core.pro, patch-src_core_math_RSpline.h and patch-src_entity_entity.pro allow to use opennurbs as a dependency from the ports system, which is the recommended method, but you may ignore them in the general distribution sources if you prefer.
- patch-src_core_RSettings.cpp is specific to the ports system (”/usr/local/share/qcad” is not really hardcoded, and modified according to $PREFIX at build time): you may ignore it if you want.
Best regards, – Th. Thomas
|
|
879 | QCAD (main) | Bug Report | Low | Autosave function not working if file is opened directl... | Assigned | |
1 |
Task Description
If a file is opened by clicking on it in an open ZIP archive, autosave will not work.
Linux Mint -64
Autosave function not working, error warning given instead!
|
|
959 | QCAD (main) | Bug Report | Low | Trimming two lines which already meet causes both to di ... | Closed | |
1 |
Task Description
If I “Trim Both” a pair of lines which already meet, then neither line changes appearance on screen (as expected). However, after saving and reloading the file, both lines are now missing.
To reproduce:
Create a new drawing
Draw a 10×10 square
Save the drawing
Close and reopen. The square shows up as expected.
Use the Trim Both tool on a pair of lines meeting at one of the corners. No change in the display.
Save the drawing
Close and reopen. The lines used in step 5. have disappeared.
If one or both of the lines changes length, either lengthened or shortened, then the changed line is preserved.
Build information:
Version: 3.4.2.0 (3.4.2) Build Date: Oct 25 2013 Qt Version: 4.7.4 Compiler: MSVC++ 10.0 (2010)
Running on Windows 7 64-bit.
|
|
1032 | QCAD (main) | Bug Report | Medium | Copy / paste: pasting copied block references results i ... | Closed | |
1 |
Task Description
- Copy two block references of block “circle” which contains one circle - Paste into new, empty drawing - Pasted block “circle” contains two circles
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
1089 | QCAD/CAM | Bug Report | Low | Convert polyline from segments on locked layers deletes ... | Closed | |
1 |
Task Description
If you select (line) segments in a visible yet locked layer and choose “convert segments to polyline” (OG), the segments are deleted, but inserting the polyline fails. So you can easily destroy locked layers by mistake which contradicts the idea of locking layers.
|
|
1118 | QCAD (main) | Bug Report | Medium | Text not saved | Closed | |
1 |
Task Description
Hello,
I am stage manager and I have been using QCAD PRO nearly every day for 2 years now. But since yesterday it seems that text is not saved within the file : when I reopen a saved file, text doesn’t show up. Do I miss a setting ? I currently run Mac OS X Mavericks but there haven’t been any issues with this OS for months.
I deleted the app and prefs and tried out with 3.6.0 (which I don’t use because it often quits brutally), and also the free version of 3.6.4 But the issue still the same.
As I use this app for my work, it is very annoying not to be able to use text ! Thanks for your help
|
|
1139 | dxflib | Bug Report | Low | dxflib: leading / trailing spaces are removed from text | Closed | |
1 |
Task Description
dxflib strips leading / trailing spaces from text when importing DXF files.
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1242 | QCAD (main) | Bug Report | Low | SVG import DPI box should use localized decimal separat... | Assigned | |
1 |
Task Description
I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.
|
|
1283 | QCAD (main) | Bug Report | High | Crash when snapping to intersection points between zero ... | Closed | |
1 |
Task Description
Create spline through point P. Create zero length line at P. Snap to P → crash.
|
|
1329 | QCAD (main) | Bug Report | Low | Property Editor: Changing value of block attribute sets ... | Closed | |
1 |
Task Description
Attributes are not fixed on their layer. When changing the content of an attribute the content is automatically placed on the active layer not on the attribute layer. It would be much better if changing an attribute would not result in a change of the assigned layer. For an example look also on www.qcad.org/rsforum/viewtopic.php?f=89&t=3870
Thomas
|
|
1335 | QCAD (main) | Bug Report | Low | Wrong tangential snap point by moving an existing line ... | Closed | |
1 |
Task Description
When I try to make a tangential snap of an existing line to a circle by moving one line end to the circle, qcad snaps to a wrong snap point on the circle.
|
|
1387 | QCAD (main) | Bug Report | Low | Offset tool not working on rounded polylines | Closed | |
1 |
Task Description
When “offset whole polyline” is selected and the mouse is moved over a rounded polyline, the preview is not working at least in Window 7/8. This worked in older versions e.g. 3.6.3.
There is an example appended with an edged inner polyline and a rounded outer one. For the inner one, the offset preview is working as expected, for the rounded one it isn’t. Tested on two different PCs, one Win7 and the other one Win8.
Also see: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4009
|
|
1419 | QCAD (main) | Bug Report | Low | Multi-Monitor enviroment - Option toolbar didn't work | Closed | |
1 |
Task Description
Hello everybody,
I’m using QCAD 3.14.3 on Ubuntu Linux 64bit wit a two monitor enviroment. When I place the option toolbar from the top of main window onto the second monitor, it’s impossible to input a distance. The cursor is missing. Seems that the input-field is only working correct, when the option toolbar is connected to the main-window.
Hope I described the issue understandable, if not, please don’t hesitate to ask me for further descriptions...
Whould be nice to fix this bug...
Best regards
Andreas
|
|
1420 | QCAD (main) | Bug Report | Low | Multi-Monitor environment - Commandline toolbar didn't ... | Closed | |
1 |
Task Description
Hello everybody,
I’m using QCAD 3.14.3 on Ubuntu Linux 64bit with a two monitor environment. When I place the commandline-toolbar from the bottom of main window onto the second monitor, it’s impossible activate the commandline by pressing SPACE or CTRL+M. Only when I click into the commandline-toolbar with the mouse-cursor it’s been activated.
Hope I described the issue understandable, if not, please don’t hesitate to ask me for further descriptions...
Whould be nice to fix this bug...
Best regards
Andreas
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1460 | QCAD (main) | Bug Report | Very Low | Two Display Environment --> Problems with Toolboxes and ... | Closed | |
1 |
Task Description
Hello,
I’m unsing a two display environment and got all Tools and Widgets placed on the second display. See qcad1.png
There are two problems:
1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application. See qcad2.png
2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1. See qcad3.png
Whould be great, when this issues will be fixed
Thank you very much Andreas
P.S.: Hope described well, if not, please drop me a reply...
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
1483 | QCAD/CAM | Bug Report | Low | Draw -> Polyline -> Create from Segments deletes a segm ... | Closed | |
1 |
Task Description
With the attached DXF file, select Draw → Polyline → Create from Segments (O, G) and click on the complex polyline inside the circle (eg on the top left arc). Apolyline is created with a few segments, and one or more segments are deleted!
Different segments are deleted depending on which segment is clicked.
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1525 | QCAD (main) | Bug Report | Low | Block attributes: escaped unicode sequences in files no ... | Closed | |
1 |
Task Description
The characters in Portuguese such as “ç é â ... etc ...” are replaced by codes starting with version 3.16.x Files created with versions of QCAD 3.15.x whose characters were correct in the Properties List when opened by QCAD 3.15.x appear in this strange way when opened in versions 3.16.x. However, in the screen and in the extraction of the list of attributes the characters are correct. Apparently the error only occurs in texts on the Block Properties List and Attributes. However, you can use correctly the characters in a file created from version 3.16.x
Exemplo: “dormitory’ in portuguese is “dormitório” it’s appear like “DORMIT\U+00d3RIO” when file is opened on QCAD 3.16.x
|
|
1530 | QCAD (main) | Bug Report | Low | Draw > Circle > 3 Tangents: solutions not found | Closed | |
1 |
Task Description
Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)
When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.
I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.
I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.
Hope you can confirm my findings.
|
|
1535 | QCAD (main) | Bug Report | Low | File > Save: image references of deleted images remain ... | Closed | |
1 |
Task Description
by inserting and deleting many figures in the drawing the references to these figures are not excluded from the dxf / dwg file structure, if you exclude a figure and include it again, the reference is duplicated, etc .. this causes an increase of the size of the files dwg / dxf.
|
|
1543 | QCAD (main) | Bug Report | Low | Input with dead-keys broken (Linux) | Closed | |
1 |
Task Description
Latin characters do not work in version 3.16.5 on Linux, such as ã, õ, é, à, the curious thing is that “ç-” works. If on your machine the Latin characters that do not work are not appearing follow a bitmap for visualization.
|
|
1548 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: exception | Closed | |
1 |
Task Description
Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.
|
|
1558 | QCAD (main) | Bug Report | Low | unlayed lines | Closed | |
1 |
Task Description
DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.
|
|
1566 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: deleted bl ... | Closed | |
1 |
Task Description
Deleted (undone) block attributes are stored to DXF/DWG.
|