|
1478 | QCAD (main) | Bug Report | Low | compile qcad from git source problem | Closed | |
|
Task Description
I am following the instructions for compiling qcad from source
http://www.qcad.org/en/component/content/article/78-qcad/111-qcad-compilation-from-sources
I am using fedora 24 and qt4
git clone https://github.com/qcad/qcad
cd qcad qmake-qt4 -r this step ok make release this step fails
RSettings.cpp: In static member function ‘static QStringList RSettings::getPrinterNames()’: RSettings.cpp:722:12: error: ‘availablePrinterNames’ is not a member of ‘QPrinterInfo’
return QPrinterInfo::availablePrinterNames();
^~~~~~~~~~~~
RSettings.cpp: In static member function ‘static QString RSettings::getDefaultPrinterName()’: RSettings.cpp:726:12: error: ‘defaultPrinterName’ is not a member of ‘QPrinterInfo’
return QPrinterInfo::defaultPrinterName();
^~~~~~~~~~~~
Makefile.Release:2505: recipe for target ‘release/RSettings.o’ failed make[3]: *** [release/RSettings.o] Error 1
|
|
1479 | QCAD (main) | Bug Report | Low | Modify > Explode: too many segments for splines with la ... | Closed | |
|
Task Description
Exploding splines creates more segments than necessary in some cases with very large tolerances. The number of segments created should be the number of bezier spline segments times two.
|
|
1480 | QCAD (main) | Feature Request | Low | dwg2dwg: add command line switches to modify header var ... | Closed | |
|
Task Description
Add command line switches to dwg2dwg to change header variables during conversion (e.g. DIMASZ, DIMEXT, DIMTXT, ...)
|
|
1481 | QCAD (main) | Bug Report | Low | Block List: update changes selected item | Closed | |
|
Task Description
- Select a block in the block list. - Toggle the visibility of another block or add a block, etc. - Selected block changes
|
|
1482 | QCAD (main) | Bug Report | Low | FTBFS on FreeBSD | Closed | |
|
Task Description
Git 3ed32041, FreeBSD 10.3, amd64
Qt had been updated from 5.5.1 to 5.6.1 just recently. This resulted in two FTBFSs:
- Missing script bindings for 5.6.1:
--- /dev/null
+++ b/src/3rdparty/qt-labs-qtscriptgenerator-5.6.1/qt-labs-qtscriptgenerator-5.6.1.pro
@@ -0,0 +1,4 @@
+include( ../../../shared.pri )
+
+SUBDIRS = ../qt-labs-qtscriptgenerator-5.5.0/qtbindings
+TEMPLATE = subdirs
After this,
- Project ERROR: Unknown module(s) in QT: webenginewidgets
--- a/shared.pri
+++ b/shared.pri
@@ -46,8 +46,8 @@ macx-ios-* {
!r_mobile {
greaterThan(QT_MAJOR_VERSION, 4) {
- greaterThan(QT_MINOR_VERSION, 5) {
- # Qt >= 5.6
+ greaterThan(QT_MINOR_VERSION, 6) {
+ # Qt >= 5.7
QT += webenginewidgets
}
else {
|
|
1483 | QCAD/CAM | Bug Report | Low | Draw -> Polyline -> Create from Segments deletes a segm ... | Closed | |
1 |
Task Description
With the attached DXF file, select Draw → Polyline → Create from Segments (O, G) and click on the complex polyline inside the circle (eg on the top left arc). Apolyline is created with a few segments, and one or more segments are deleted!
Different segments are deleted depending on which segment is clicked.
|
|
1484 | QCAD (main) | Feature Request | Low | Dimensions: optionally use comma instead of dot | Closed | |
1 |
Task Description
Use comma to display dimension labels.
|
|
1485 | dxflib | Bug Report | Low | dxflib: Lines are on the wrong layer when processing dx ... | Closed | |
|
Task Description
I create a drawing using QCAD which is stored using dxflib. For some reasons dxflib must be used. This drawing contains arcs and lines on a separate layer. If the dxf file is processed by an other tool only the arcs are referenced to the specific layer. The lines are referenced to the standard layer 0. It doesn’t matter if I’m using the community edition or the pro edition.
After a some investigations I found that the created dxf file is not correct. I manually corrected the dxf file and it works as it should.
For details please refer to the appended files. Take a look to the ENTITY section and the LINE entities, e.g. line 2370. It is just to swap two entities.
Thanks for support.
|
|
1487 | QCAD (main) | Bug Report | Low | On OS X using a trackpad pinch gesture to zoom in / out ... | Closed | |
|
Task Description
On OS X using a trackpad pinch gesture to zoom in / out breaks panning and zooming. When a drawing is opened or created, pan and zoom functions work as expected. As soon as you use a pinch gesture to zoom in/out all zooming and panning operations (toolbar buttons and scroll bars) begin producing erratic behavior. The drawing has to be closed and re-opened to restore proper operation. Other open drawing windows are not affected and work properly unless you pinch gesture zoom in their window.
|
|
1490 | QCAD (main) | Suggestion | Low | Text Edit Control <ESC> maps to <cancel>. If anything i ... | Closed | |
|
Task Description
For all the Linux VI editor geeks, can you disable the <ESC> function in the text edit mode. <ESC> maps to <cancel>. If anything it should map to <ok>. Which creates no harm as it can be later undone. I have accidentally lost edits countless times due to an unbreakable habit.
|
|
1491 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: cancelling dialog ... | Closed | |
|
Task Description
Select entities, launch the Layer tool: Create Layer from Selection, change your mind - cancel this tool,
QCAD moves - regardless the cancellation - all selected entities to the active layer.
|
|
1496 | QCAD (main) | Bug Report | Low | Draw > Circle > Center, Point: coordinate input interpr ... | Closed | |
|
Task Description
I started a drawing with a circle, center at 0,150 and gave 0,0 as coordinate for a point on the circle and got visually nothing. After some head scratching and trying to find some error like locked layer, drawing color the same as background color and such, I found at the location of the center (0,150) a circle with radius 0.
I made the following trials, every time starting with a new drawing, entering everything with the keyboard.
Center point on result
circle
0,150 0,0 circle radius 0 at 0,150 0,150 50,50 circle radius 50 at 0,150 (should be a radius of 111.8 from 0,150 to 50,50) 0,150 0,50 circle radius 50 at 0,150 0,150 50,0 circle radius 0 at 0,150
It seems I always get a circle with the radius of the y-part of the coordinate.
Used version of Qcad is: QCAD version: 3.15.5.0 Date: Aug 19 2016 Qt version: 5.5.1 Compiler version: MSVC++ 12.0 (2013) Build Date: Aug 19 2016 Revision: 15ef1a13237ff8355ff590fd2e16570ef9de82a0
|
|
1497 | QCAD (main) | Performance Issue | Low | Autosnap: hangs with very complex splines | Closed | |
|
Task Description
Splines with hundreds of control points or fit points can cause hangs when using auto snap near them.
|
|
1499 | QCAD (main) | Suggestion | Low | Add script generator for Qt 5.6.2 | Closed | |
|
Task Description
As it says on the tin - please add script generator for Qt 5.6.2.
|
|
1501 | QCAD (main) | Bug Report | Low | non-layer line type assignment lost on Modify->Copy | Closed | |
|
Task Description
If a non-layer assigned line type is used, when the object(s) are duplicated the line type reverts back to ‘By Layer’.
|
|
1507 | QCAD (main) | Task | Low | Improve arc rendering for screen-based linetypes | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566
|
|
1508 | QCAD (main) | Bug Report | Low | QCAD CE: Subscript and superscript formatting lost when ... | Closed | |
|
Task Description
When multiple superscripts or subscripts are used in a text field, re-opening the saved dxf file will fail to render all but the first super/subscript element. As per attached example. Bug occurs on all Mac OS X from Mavericks onward.
Minimal reproducible steps: 1. Open new document in QCAD 2. Add a text object 3. Make part of the text sub or super-script 4. Make another part of the text also sub/superscript, with at least one ‘normal’ character between the two sub/superscripts 5. Save file and close it. Don’t have to quit QCAD. 6. Reopen the file. Voila, all but the first sub/superscript element is broken.
Dan.
ps. QCAD is a pretty great piece of software, nice work all.
|
|
1509 | QCAD (main) | Bug Report | Low | Ellipse / circle, ellipse / ellipse intersections | Closed | |
|
Task Description
Not all intersections points between ellipses and circles or other ellipses are found. This is due to too tight tolerances.
See: http://www.qcad.org/rsforum/viewtopic.php?f=76&t=4574
|
|
1511 | QCAD (main) | Bug Report | Low | Preferences not saved | Closed | |
|
Task Description
as read in http://www.qcad.org/rsforum/viewtopic.php?t=2957, I want to edit my preferences, but it does not save from one session to the other.
I meet the same problem state here, http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&p=7287&hilit=preferences+save#p7287 but the solution two have one change at the time does not work for me. octal permits are: 120 -rwxrwxrwx@ 1 dr staff
should I change the group ?
In ini file at line 78, it points to a java script: scripts/Pro/Edit/AppPreferences/ShortcutPreferences, where is that stored ?
|
|
1513 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: Layer created, sel ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583
|
|
1514 | QCAD (main) | Bug Report | Low | Block attributes: association with block reference lost ... | Closed | |
|
Task Description
Create block reference with attribute Copy block reference and attribute Paste
The copied attribute is now associated with the first block reference instead of the second.
|
|
1516 | QCAD (main) | Suggestion | Low | QT style on Linux | Closed | |
|
Task Description
The startup script still forces a QT-style; Getting bored of that one, qcad runs fine with the system default style - probably that was a qt4 thing, that can be removed, so it blends better with the DE?
18c18 /opt/qcad/qcad < LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@” —
LD_LIBRARY_PATH=”$DIR” “$binary” “$@”
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1519 | QCAD (main) | Bug Report | Low | Ruler precision always zero | Closed | |
|
Task Description
Rulers show only whole numbers.
|
|
1520 | QCAD (main) | Bug Report | Low | Modify > Rotate: rotating splines changes start/end tan ... | Closed | |
|
Task Description
- Create spline from fit points - Rotate spline - Spline shape changes due to erroneous start/end tangents
Similar problem when reversing spline from fit points.
|
|
1521 | QCAD (main) | Bug Report | Low | Modify > Offset: fails in certain cases with short arcs | Closed | |
|
Task Description
Offset curve not trimmed / clipped correctly.
Offset distance: 2.5
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1523 | QCAD (main) | Bug Report | Low | Draw > Hatch > Hatch from Segments: fails for circle in ... | Closed | |
|
Task Description
- Draw circle inside other circle - Draw > Hatch > Hatch from Segments - Click both circles - Right-click
|
|
1524 | QCAD (main) | Bug Report | Low | Command line: cannot enter @ sign in command line on Ge ... | Closed | |
|
Task Description
@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.
This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.
Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
1530 | QCAD (main) | Bug Report | Low | Draw > Circle > 3 Tangents: solutions not found | Closed | |
1 |
Task Description
Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)
When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.
I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.
I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.
Hope you can confirm my findings.
|
|
1531 | dwg2svg | Feature Request | Low | dwg2maptiles: add support for transparent background | Closed | |
|
Task Description
Trying to create map tiles using dwg2maptiles with a transparent background by adding the option- -background=’#00FFFFFF’ -background=’transparent’
The output has transparent background but the PNGs get multiplied and scrambled and are not at all as expected.
Attached: original DWG file and an example of the error prone PNG.
|
|
1532 | QCAD (main) | Bug Report | Low | Selection Problem ? | Closed | |
|
Task Description
Please attached file. When dragging a selection window across only the cyan lines -I get only one line selected?
|
|
1533 | QCAD (main) | Bug Report | Low | I can not print and I can not export to "pdf" file (Qca ... | Closed | |
|
Task Description
I can not print and I can not export to “pdf” file. I use the latest professional version of Qcad with windows 10. Thank you
|
|
1534 | QCAD (main) | Suggestion | Low | Headless Styling | Closed | |
|
Task Description
Since the launcher batch no longer requests “-style plastique” QT wants to apply the native style of the desktop environment. This fails on a headless system (or where the current user has no graphical shell to connect to) with the message “Gtk-WARNING **: cannot open display: “. Fortunately, QT provides a workaround in addtion to the new “platform=offscreen” flag.
In the tools that set -no-gui, beforehand export these variables into the environment
export QT_STYLE_OVERRIDE=""
export QT_QPA_PLATFORM=offscreen
export DISPLAY=""
PS: QT-offscreen will not find fonts; unfortunately the workaround only allows for a single directory to search them (I need helvetica):
export QT_QPA_FONTDIR="/usr/local/share/fonts/type1"
Maybe that should get reported upstream, so that like LD_LIBRARY_PATH several directories could be specified.
|
|
1538 | QCAD/CAM | Bug Report | Low | CAM not use the shortest way | Closed | |
|
Task Description
ich habe ein Linien Gitter in QCAD erstellt und dann mit CAM Export eine NC Datei erstellt. Im CAM Simulator sieht man dass der GCODE Postprozessor nicht den kürzesten Weg verwendet. Anbei folgende Dateien : CAM_TEST_LINIEN.dxf, CAM_TEST_LINIEN.nc, CAM_TEST_LINIEN.log und eine Bilddatei CAM_TEST_LINIEN.png hier kann man sehen wie die Eistellungen für die GCODE Erstellung sind.
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
1540 | QCAD (main) | Bug Report | Low | Draw > Line > Parallel: Changing back to Auto has no ef ... | Closed | |
|
Task Description
Draw > Line > Parallel - switch type to Line, XLine or Ray - switch back to Auto - Parallel is always line segment
|
|
1544 | QCAD (main) | Bug Report | Low | Crash when selecting spline | Closed | |
|
Task Description
This is an interesting bug on my machine. The attached file crashes on 3.15.5, works perfectly well on 3.11.0 and 3.7.5
To see the problem open the file and click on the upper spline. QCAD disappears.
dajo
|
|
1545 | QCAD (main) | Bug Report | Low | File > Open: Crash on some Linux setups | Closed | |
|
Task Description
A curious fact is occurring here QCad 3.16.5 is aborting the opening of files in 90% of the attempts on a machine with native Linux Mint 18.1 and works normally in a virtual machine under Virtualbox in Windows 10, tests were done on the 3 machines (VM-Linux, Nat-Linux and Win 10) with QCad 3.15.5 and everything works normally. The two notebooks tested have Intel I-7 RAM = 8Gb Ram and 4 processors. Follow 02 files for evaluation.
|
|
1546 | QCAD (main) | Bug Report | Low | 'Open file' dialog shows no files - although the direct ... | Closed | |
|
Task Description
I have many .dxf files created in QCad-2.2.2.0 (which I still use) all of which open in LibreCad without issues.
If I try to open a file in the version below (or an earlier fairly recent version) the file chooser dialog is empty.
Version: 3.16.5.0 (3.16.5) Build Date: Feb 20 2017 Qt Version: 5.6.2 Architecture: x86_64 Compiler: gcc 5.4.0 OS: Mageia 6 x86_64 with plasma5 D.E
However if I copy a file name from the same directory using Dolphin file manager and paste it into the filename field in the chooser (which is showing no files) the file opens up correctly.
I reported this in Mageia bugzilla here against an earlier version but there was no response as I think the maintainer is MIA. https://bugs.mageia.org/show_bug.cgi?id=18816
Today I decided to try the latest version in the hope that this issue would be fixed (I am also a packager with Mageia) but it is still the same.
I will add the build log as an attachment in case you see something that may be specific to our configuration.
It would be good if we could resolve this before the imminent release of Mageia 6 ;)
Running from CLI I see these around the time I open the file chooser dialog: ——–snip———
22:05:02: Debug: TransactionListenerPlugin::postInit 22:05:02: Debug: got transaction 22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:16: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:05:19: Debug: got transaction 22:05:47: Debug: got transaction 22:06:08: Debug: Refilling KProtocolInfoFactory cache in the hope to find “file”
22:06:09: Debug: got transaction ———-snip——–
|
|
1548 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: exception | Closed | |
1 |
Task Description
Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.
|
|
1550 | QCAD (main) | Bug Report | Low | Block references: mirrored block references in 3rd part ... | Closed | |
|
Task Description
Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.
|
|
1551 | QCAD (main) | Bug Report | Low | File > Bitmap Export: exception when image size too lar ... | Closed | |
|
Task Description
Hi friends,
I have this traceback with my Qcad from ppa for linux, to export in png image: Warning: libpng warning: Image width is zero in IHDR Warning: libpng warning: Image height is zero in IHDR libpng error: Invalid IHDR data Error: cannot save file: /home/patrinux/Bureau/IMAGE.png Error: Unknown error Debug: got transaction Warning: RScriptHandlerEcma::eval: script engine exception: “Error: :-1:-1: Wrong number/types of arguments for RMainWindowQt.handleUserWarning(). <native>() at -1 <anonymous>() at scripts/File/BitmapExport/BitmapExport.js:56 <native>(RActionAdapter(0x26d1ea0)) at -1 <global>() at 1” Warning: “<anonymous>()@scripts/File/BitmapExport/BitmapExport.js:56” Debug: got transaction
Impossible to obtain an png image, and others too. I am on Linux Mint Serena 64B alias Ubuntu Xenial 16.04. Qcad last release:
Version : 3.16.4.4 (3.16.4.4) Internet : QCAD.org Date de fabrication : Jan 26 2017 Révision :
Qt Version : 4.8.7 Architecture : x86_64 Compiler : gcc 5.4.0
|
|
1553 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception with circles | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4776
|
|
1554 | QCAD (main) | Bug Report | Low | Auto focus of options toolbar when entering numbers bro ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4774
|
|
1556 | QCAD (main) | Bug Report | Low | Linux lubuntu - menu doesn't work properly | Closed | |
|
Task Description
This is not the only menu that didn’t work properly: moving the mouse cursor on the lower arrow made the list moving up; but is impossible to make the list moving down when I put the mouse over the upper arrow. The only workaround (time consuming but effective) is to select the first upper paper size: selecting again the menu I can see tha current selection in the second position: I select the one above it; and so on, until I find what I need.
|
|
1557 | QCAD (main) | Bug Report | Low | Zero length lines not shown | Closed | |
|
Task Description
Zero length lines are not shown in QCAD. For best compatibility these should be shown as dots.
|
|
1558 | QCAD (main) | Bug Report | Low | unlayed lines | Closed | |
1 |
Task Description
DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.
|
|
1559 | QCAD (main) | Bug Report | Low | Font substitution in command line tools | Closed | |
|
Task Description
Font substitutions broken for many cases. Font “Standard” can never be substituted.
|