|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Unconfirmed | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
173 | QCAD (main) | Feature Request | Low | explode text to letters | Assigned | |
1 |
Task Description
implement
|
|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
512 | QCAD (main) | Feature Request | Low | Modify stretch and Restrict ortho | Assigned | |
1 |
Task Description
The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.
So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
525 | QCAD (main) | Feature Request | Low | change the printed symbol of points | Assigned | |
1 |
Task Description
Hi,
in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.
It would be nice if one could change this behaviour / select the symbol of points.
Best regards - Stefan
This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.
|
|
566 | QCAD (main) | Feature Request | Low | Shortkey for rectangle text rotation | Assigned | |
1 |
Task Description
I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
596 | QCAD (main) | Feature Request | Low | Tool "Lengthen" mit "Total" erweitern oder .... | Assigned | |
1 |
Task Description
Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.
Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.
Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.
Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel
|
|
609 | QCAD (main) | Feature Request | Low | Clean up tool | Assigned | |
1 |
Task Description
To have a ‘clean up ' tool to:
- eradicate duplicate lines - eradicate stray points - remove empty layers - remove unused blocks
Perhaps with an initial dialog which allows the user to choose what they want to clean up.
|
|
612 | QCAD (main) | Feature Request | Low | Plot math functions | Assigned | |
1 |
Task Description
Input:
X axis min/max or choose line (?) or center (for polar functions)
function: y = f(x) / polar function: r = f(a)
Output:
function plot
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
670 | QCAD (main) | Feature Request | Low | Configurable rendering options for stacked text | Assigned | |
1 |
Task Description
Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript). This may also apply to superscripts.
|
|
684 | QCAD (main) | Feature Request | Low | Configurable behavior for using box selection with Shif... | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180
|
|
703 | QCAD (main) | Feature Request | Low | Info function -> contour for Hatch not closed ... | Assigned | |
1 |
Task Description
Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!
But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.
If I have to zoom into the Problem - I will lose the Info where the problem is
To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............
It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.
And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)
|
|
708 | QCAD (main) | Feature Request | Low | To re-introduce Tile and Cascade window options | Assigned | |
1 |
Task Description
To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.
|
|
724 | QCAD (main) | Feature Request | Low | Useless reference point entering when moving relatively | Assigned | |
1 |
Task Description
Hi, this is a usability feature request:
If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.
It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).
Thx
|
|
757 | QCAD (main) | Feature Request | Low | Dim: Architectural tick and Leader Arrow size independe... | Assigned | |
1 |
Task Description
Leader Arrow size and the Architectural tick size are controlled by one and the same value.
It would be nice to get the possibility to adjust them independently from each other ...
|
|
764 | QCAD (main) | Feature Request | Low | Links to Data sheet, Part List ... | Assigned | |
1 |
Task Description
Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.
It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing. Like the bitmap function without displaying the files in the drawing ...
|
|
774 | QCAD (main) | Feature Request | Low | Additional Button in the Blocklist menu for "Create Blo... | Assigned | |
1 |
Task Description
If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”. If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.
But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.
Or alternative an additional Button ...
Anyway - in my opinion would that make the “Blocklist” complete.
|
|
775 | QCAD (main) | Feature Request | Low | Note book tool for QCAD | Assigned | |
1 |
Task Description
It would be really cool to have a Note book tool for QCAD!
For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.
Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!
|
|
779 | QCAD (main) | Feature Request | Low | Turning detailed view on/off | Assigned | |
1 |
Task Description
My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)
For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.
But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.
Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.
Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)
|
|
784 | QCAD (main) | Feature Request | Low | Turn text into hatched polylines | Assigned | |
1 |
Task Description
Would it be possible to add a feature which turns selected text into solid fill hatched polylines?
That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.
Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.
|
|
798 | QCAD (main) | Feature Request | Low | elaborate on purge tool | Assigned | |
1 |
Task Description
Modify the “purge layer” tool to preserve empty layers with a locked status. see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386
|
|
823 | QCAD (main) | Feature Request | Low | Add Midpoint Handles to Lines and Polylines | Assigned | |
1 |
Task Description
The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality. Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value. It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)
|
|
829 | QCAD (main) | Feature Request | Low | Additional options for the Info Tool Area ... | Assigned | |
1 |
Task Description
The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options
Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!
It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area. Two mouse clicks for a rectangle area and done
In addition to that it would be nice to have the possibility to count up or down a couple areas. E.g. I measure area 1 plus area 2 or area 1 minus area 2 ... Maybe just with an additional keystroke like + or -
|
|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
849 | QCAD (main) | Feature Request | Low | Make maximum visible reference points of selection conf... | Assigned | |
1 |
Task Description
Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).
Original report:
Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.
I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger
regards
Benjamin
|
|
859 | QCAD (main) | Feature Request | Low | Persistent selection button added to tool set. | Assigned | |
1 |
Task Description
It would be useful to have a persistent selection button added to the ‘selection’ tool set.
This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.
|
|
866 | QCAD (main) | Feature Request | Low | Paste block reference: add third option to rename paste... | Assigned | |
1 |
Task Description
Scenario:
Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.
Switch to Drawing 2, this drawing has also a Blockname X but with a different content.
Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.
No warning pops up - it just happens!
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
962 | QCAD (main) | Feature Request | Low | Default save / open directories | Assigned | |
1 |
Task Description
Add the option to use a fixed path for the save to, open and CAM export directories.
(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)
|
|
979 | QCAD (main) | Feature Request | Low | Text dialog: insert special characters in simple text m... | Assigned | |
1 |
Task Description
The Omega button to insert special characters is only available in rich text mode. Make it available in simple text mode as well.
|
|
986 | QCAD (main) | Feature Request | Low | Detect duplicates - only on selected area | Assigned | |
1 |
Task Description
It would be useful to have an additional option to only detect duplicates on user defined selection of drawing. Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
995 | QCAD (main) | Feature Request | Low | Property editor: add 'edit block' button | Assigned | |
1 |
Task Description
Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
1104 | QCAD (main) | Feature Request | Low | Printing: Add support for page range | Assigned | |
1 |
Task Description
When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1152 | QCAD (main) | Feature Request | Low | Add preference for snap label and snap cursor shape / c... | Assigned | |
1 |
Task Description
Would it be possible to have options for:
1.Enable or disable Snap label with text.
2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.
* It would be good for users to have the choice.
|
|
1156 | QCAD (main) | Feature Request | Low | Add preference to force toolbars to be floating | Assigned | |
1 |
Task Description
Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?
|
|
1169 | QCAD (main) | Feature Request | Low | Bitmap clipping | Assigned | |
1 |
Task Description
Clipping bitmaps to only show a part of the image.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263
|
|
1172 | QCAD (main) | Feature Request | Low | Print Preview - Add 'Place Paper Option' tool | Assigned | |
1 |
Task Description
Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.
Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!
If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
1 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|