|
962 | QCAD (main) | Feature Request | Low | Default save / open directories | Assigned | |
1 |
Task Description
Add the option to use a fixed path for the save to, open and CAM export directories.
(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)
|
|
979 | QCAD (main) | Feature Request | Low | Text dialog: insert special characters in simple text m... | Assigned | |
1 |
Task Description
The Omega button to insert special characters is only available in rich text mode. Make it available in simple text mode as well.
|
|
986 | QCAD (main) | Feature Request | Low | Detect duplicates - only on selected area | Assigned | |
1 |
Task Description
It would be useful to have an additional option to only detect duplicates on user defined selection of drawing. Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
995 | QCAD (main) | Feature Request | Low | Property editor: add 'edit block' button | Assigned | |
1 |
Task Description
Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1051 | QCAD (main) | Feature Request | Low | Info tool, polygonal area, possibility for a postfix la... | Assigned | |
1 |
Task Description
... would be nice.
If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².
I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...
|
|
1067 | QCAD (main) | Feature Request | Low | Filling an area with a bitmap | Assigned | |
1 |
Task Description
Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
1104 | QCAD (main) | Feature Request | Low | Printing: Add support for page range | Assigned | |
1 |
Task Description
When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1152 | QCAD (main) | Feature Request | Low | Add preference for snap label and snap cursor shape / c... | Assigned | |
1 |
Task Description
Would it be possible to have options for:
1.Enable or disable Snap label with text.
2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.
* It would be good for users to have the choice.
|
|
1156 | QCAD (main) | Feature Request | Low | Add preference to force toolbars to be floating | Assigned | |
1 |
Task Description
Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?
|
|
1169 | QCAD (main) | Feature Request | Low | Bitmap clipping | Assigned | |
1 |
Task Description
Clipping bitmaps to only show a part of the image.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263
|
|
1172 | QCAD (main) | Feature Request | Low | Print Preview - Add 'Place Paper Option' tool | Assigned | |
1 |
Task Description
Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.
Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!
If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1242 | QCAD (main) | Bug Report | Low | SVG import DPI box should use localized decimal separat... | Assigned | |
1 |
Task Description
I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
1 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|
|
1282 | QCAD (main) | Feature Request | Low | Changeable color of the selection bar in layer list. | Assigned | |
1 |
Task Description
Changeable color of the selection bar in the layer list. Now the color of the bar is darkblue and the underlaid icons are black and are not readable.
|
|
1287 | QCAD (main) | Feature Request | Low | Information tool shows absolute units in print preview | Assigned | |
1 |
Task Description
With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units. So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.
See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
|
|
1288 | QCAD (main) | Feature Request | Low | Print Preview Scaled Rulers | Assigned | |
1 |
Task Description
Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?
|
|
1298 | QCAD (main) | Feature Request | Low | Drawing Preference; File format | Assigned | |
1 |
Task Description
Hi, I get anoyed everytime saving a drawing;
File Format not recommended....... [Yes] ; I know. it's suppose to be in that format!
Saving to file...... [OK] ; I already told you
Black entities ......bla bla [OK] ; I already told you
Custom colors ...... bla bla [OK] ; I already told you
Therefore, Drawing Preferences should start with the file format choice field;
File Format: R.......
Drawing should be opened and saved in that format without any question. Please.
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
1345 | QCAD (main) | Feature Request | Low | Added option to paste a number of entities with even/eq... | Assigned | |
1 |
Task Description
Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209
An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
1407 | QCAD (main) | Feature Request | Low | Splines: add support for knot weights, start-, end tang... | Assigned | |
1 |
Task Description
Attached DWG/DXF files are incorrectly read by QCAD. They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000. Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.
First spline is created with fit points: 2,2 4,4 6,2 Then copied and applied weight of 2 on central control point. Then copied again and applied weight of 0.5 on central control point.
Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent. Then copied and applied fit tolerance of 1 for fit points.
Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.
Fourth and fifth spline are correctly drawn by QCAD.
Link to bitmap (converted to png) export: External Link
Versions QCAD version: 3.13.1.0 Date: Mar 17 2016 Qt version: 4.8.4 Compiler version: gcc 4.4.3 Build Date: Mar 17 2016 Revision: Architecture: x86_64 OS: Linux OS version: Unknown
|
|
1425 | QCAD (main) | Feature Request | Low | Automatically create hatch entities behind border entit... | Assigned | |
1 |
Task Description
Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.
|
|
1430 | QCAD (main) | Feature Request | Low | Modify > Round: one-click fillet | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256
|
|
1440 | QCAD (main) | Feature Request | Low | New Drawing in Simple API | Assigned | |
1 |
Task Description
Could it be possible to add a simple function to add a new empty drawing (like File > New) to Simple.js ? Thank you. (PS, this simple.js API is awesome, btw :D)
( I already have my own to simplify my scripts, but it does not seem to work correctly if I set action.setRequiresDocument(false); in the init functions See more at http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4203#p15203 )
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1452 | QCAD (main) | Feature Request | Low | Colour opacity option | Assigned | |
1 |
Task Description
Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?
related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
1464 | QCAD (main) | Feature Request | Low | Option button to access finer grid to snap | Assigned | |
1 |
Task Description
Hi,
I use eagle cad for pcb designs and I like its ability to snap to finer snap to grid when pressing option button (ALT in windows). I am fine with auto grid setting, however, it would be good to also have a way to access finer grid when pressing down option button.
For example, when zoomed out, grid is 100mm apart. When pressing down on the option button (ALT in windows), grid switches to finer 10mm. This will save me time, zooming in to access finer grid to snap to.
|
|
1469 | QCAD (main) | Suggestion | Low | Cartouche automatique | Assigned | |
1 |
Task Description
Would not it be possible to create a kind of template for printing? We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).
Original suggestion:
Bonjour,
Ne serait il pas possible de créer une sorte de template lors de l’impression ? On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).
|
|
1472 | QCAD (main) | Feature Request | Low | Arc fit tool to improve large files | Assigned | |
1 |
Task Description
Large files/large entities perform bad in QCad. There are many dxf files that are created with thousand of lines that perform reasonable in other cad’s/cam’s that qcad cannot match.
One very useful tool, that could be added would help to improve qcad performance and at the same time enlarge the dxf quality (by replacing thousand of files by arcs), would be a tool called “arc fit” where, when possible and under a determined possible error margin (user selectable) creates arcs replacing the existing lines. This would improve the file work in QCad also improves CAM software that would work after QCad, that I think is important for many users.
For example, if it is needed to use qcad to generate toolpaths for letters, after exploding letters, the output is almost impossible to work due to the number of lines that are created. Having arcs instead of lines would greatly improve qcad use.
|
|
1503 | QCAD (main) | Feature Request | Low | Detect duplicates within a given selection -new tool re... | Assigned | |
1 |
Task Description
It would be so useful to have an option to be able to detect duplicates within a given selection.
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1613 | QCAD (main) | Feature Request | Low | Add Orthogonal Option to Angelur DIM Tool ... | Assigned | |
1 |
Task Description
... please see below:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1705 | QCAD (main) | Feature Request | Low | Connect certain actions and layers | Assigned | |
1 |
Task Description
When dimensioning my drawings I always want the dimensions to be on the dimensions layer. When adding text I want the text to be on the text layer. When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer. When drawing a line segment it almost always is on my outline layer.
So I propose a new option to bind certain actions to certain layers. Whenever those actions are selected the layer should automatically be switched.
I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
1 |
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1755 | QCAD (main) | Feature Request | Low | Selecting standard rotation angles by mouse click for M... | Assigned | |
1 |
Task Description
This would be nice. It will save a lot mouse - keypad changes for me.
|