|
2025 | QCAD/CAM | Bug Report | Low | Set Nesting Quantity shows wrong quantity | Closed | |
|
Task Description
If I set “Set Nesting Quantity” to e.g. 5 it will remember this number within the session. If I need to check which number I’ve used last time there is no way to find the actual used value - it will show me always 1. If I restart QCAD/CAM the value is completely lost and the nesting tool tries to fit in as much as possible into the sheet - regardless that the quantity number still shows one.
It would be nice to have a remember function even after restarting QCAD/CAM and have some kind of possibility to see the last used value.
|
|
1136 | Translation | Bug Report | Low | Selection filter: property list not translated | Closed | |
|
Task Description
QCAD Pro / Deutsch
Selektionsfilter: Eigenschaft / Auswahlliste wird nicht in Deutsch angezeigt.
|
|
2197 | QCAD (main) | Feature Request | Low | Selection Filter: add properties Length and Area | Closed | |
1 |
Task Description
It would be nice if we could use the length of a polyline as a search criterion too.
Selection Filter, Property for Polyline, “Length” Comparison: same like Line?
Thanks.
|
|
2402 | QCAD (main) | Bug Report | Low | Selection Filter fails for different filter scenarios. | Closed | |
|
Task Description
Please refer to the user report below: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9586&p=38653#p38653 Note: 3.27.6.0 (3.27.6) works as intended.
Thanks.
|
|
1026 | QCAD (main) | Feature Request | Low | Selection Filter also present in the Menu "Selection" | Assigned | |
|
Task Description
It would be nice to have the Selection Filter also present in the Menu / Selection List
|
|
1642 | QCAD (main) | Bug Report | Low | Selection Filter / Line / Continuous | Closed | |
|
Task Description
The Selection Filter doesn’t works proper with a Line / Continuous combination. Example drawing has Linetype by Layer and not by Layer
Filter Entity type: Line Property: Linetype Comparison: = (is) Value: Continuous
... doesn’t finds what I have ask for. Husky-2017.10.05-04.png
Filter Entity type: Line Property: Linetype Comparison: ≠ (is not) Value: Continuous
... finds more than that what I have ask for. Husky-2017.10.05-03
|
|
1222 | QCAD (main) | Bug Report | Low | Selection Filter / Line / Angle in radians | Closed | |
|
Task Description
If I try to use the Selection Filter to find Lines regarding to the used Angle it fails in many cases.
In my test drawing you can see that I’m able to select Lines with an 0° Angle but I’m not able to select any of the other lines with e.g. an 45° / 90° 180° or 315° etc. angle.
|
|
1025 | Translation | Bug Report | Low | Selection Filter / German translation | Closed | |
|
Task Description
The German translation isn’t shown in all parts of the Selection Filter.
|
|
975 | QCAD (main) | Feature Request | Low | Search/Replace accomplished info ... | Closed | |
|
Task Description
It would be nice to get a status information after the use of the “Search/Replace” tool.
Something like: “5 matches found and replaced”, or no “matches found”.
It helps allot to get an Idea what happens in your drawing. Right now the tool window will just disappear and you have no idea about any success.
|
|
1688 | QCAD (main) | Bug Report | Low | Scaling (SZ) selection by Mouse only proportional possi ... | Closed | |
|
Task Description
Tested with checked / unchecked button for proportional scaling - but it doesn’t matter.
|
|
789 | QCAD (main) | Feature Request | Low | Scale tool - mouse-pointer - inversely proportional sca... | Assigned | |
2 |
Task Description
3.0.8. Bug Report or Feature Request ..... I’m not sure!
If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale. x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
3 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
855 | QCAD (main) | Feature Request | Low | Scale dimension on/off option ... | Closed | |
|
Task Description
QCAD 3.1.5 - has a new “Dimensioning Scale adjustment option” (Property editor/Linear Factor). NICE!!!
What means - we are now able to change the dimension scale for existing dims!
My Feature request refers to new dimensions and I think it would be perfect to have a “Scale Factor - On/Off Option” for all Dim Tools.
That would bring us in the position to copy / scale a part of our drawing for a detail view and we could just use us usual the dimensioning tools (with a scale factor) for the dimensioning task ....
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
1793 | QCAD (main) | Bug Report | Low | Ruler functionality is compromised by Auto Grid setting | Closed | |
1 |
Task Description
Regarding to an observation by the forum member Horst1803 http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725
The ruler functionality is compromised by Graphics View / Grid settings. To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.
Case: Appearance / Show rulers = activated
Application Preferences / Graphics View / Grid
on - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation visible = Labels visible
off - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation invisible = Labels invisible
|
|
2434 | QCAD (main) | Bug Report | Low | Rotate Viewport fails | Closed | |
1 |
Task Description
Rotating a Viewport will lead to rotate the drawing in the viewport but not the Viewport itself. This will happen during a creation process by using VT or afterward by editing a viewport in the Property Editor.
|
|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
355 | QCAD (main) | Feature Request | Low | Remember function for dimension Option | Assigned | |
|
Task Description
I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.
Why Remember Function: If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.
|
|
353 | QCAD (main) | Bug Report | Low | Relative Angle / Line Orthogonal caused malfunction in ... | Closed | |
|
Task Description
After using Line “Relative Angle” or “Line Orthogonal” the Toolbar is in a loop without showing all the Cad tools such as “Modify” “Hatch” etc.. Escape switch only between the “Lines Menu” and the “Select Menu”. To get all Cad Tools back you have to restart QCad.
|
|
676 | QCAD (main) | Feature Request | Low | Reference Points for "Relative Angle" and "Orthogonal" ... | Closed | |
|
Task Description
Other Line tools are offering Reference Points like: “Start” - “Middle” - “End”.
It would be nice to have the same Reference points for “Relative Angle” and “Orthogonal” lines.
|
|
811 | QCAD (main) | Bug Report | Low | Rectangle(RE) with a defined x,y coordinate start point ... | Closed | |
|
Task Description
QCAD 3.0 / 3.1
Test case: set relative zero, choose rectangle RE tool, choose snap tool coordinate, Now QCAD is asking for the x,y coordinates and my thinking was it will just use them for the start point (what I’m looking for!) - but .... QCAD will use the given coordinates for the Start point of the rectangle(right!) AND as size for the rectangle(wrong!)
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
2215 | QCAD (main) | Bug Report | Low | Rectangle area selection fails partly at Ordinate dim's | Closed | |
|
Task Description
Rectangle area selection doesn’t work on ALL Ordinate dim’s.
Related to? https://www.qcad.org/bugtracker/index.php?do=details&task_id=2214
|
|
2214 | QCAD (main) | Bug Report | Low | Rectangle area selection fails because Block reference ... | Closed | |
|
Task Description
A block selection in Model_Space with the rectangle area selection tool fails because the block reference is located at an unexpected location. If I catch by accident the reference point or do a simple mouse click selection it will work.
|
|
597 | QCAD (main) | Bug Report | Low | Rechteck, Referenspunkt nicht mehr wählbar in kombinati ... | Closed | |
|
Task Description
Will ich ein Rechteck mit Größenvorgabe zeichnen und kombiniere dies mit einem versetzten Relative Zero Punkt kann ich nicht mehr den Referenzpunkt (unten Links etc.) wählen und in der Vorschau sehen. Gezeichnet wird es richtig - wenn ich den Vorgang abschließen kann!
Fallbeispiel: Rechteck mit Größe, verändern Relativ Zero, Ende eines anderen Elementes, Relativ X,Y, Will ich dann den Referenzpunktes des Rechtecks verändern - hat QCad Probleme dies umzusetzen oder auch den Vorgang dann flüssig durchzuführen.
|
|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1044 | QCAD (main) | Feature Request | Low | Radian measure symbol for Geometry labeling ... | Assigned | |
2 |
Task Description
We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...
It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.
|
|
1770 | Website | Bug Report | Low | qcad.org shop language | Closed | |
|
Task Description
FR - Ok, DE - Ok,
EN - not OK. Main text is in english, menu is in german.
|
|
1818 | Documentation | Task | Low | QCAD Reference Manual / Paste along Entity ... | Closed | |
|
Task Description
... describes basically the “Paste” tool and not the “Paste along Entity” tool.
|
|
1769 | QCAD (main) | Bug Report | Low | QCAD Help link to "FAQ's (Online) is broken | Closed | |
|
Task Description
QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page. (Menu → Help → FAQ‘s (Online))
|
|
1251 | QCAD (main) | Bug Report | Low | QCAD CE can't read ä,ö ü in a file name | Closed | |
|
Task Description
The QCAD Community Edition isn’t able to read / import dxf files with a German “Umlaut” like ä,ö, ü in the dxf file name. If I change the file name from a “ä” into a “ae” QCAD CE will open the file flawless.
|
|
682 | Book | Feature Request | Low | QCad Book with Bookmarks ... | Closed | |
|
Task Description
QCad Book
Would be nice to have the index linked (like Bookmarks, Hyperlinks, Jump marks) with the regarding chapter.
So that I just can click in the index what I’m looking for and it jumps directly to the correct chapter.
|
|
749 | QCAD (main) | Bug Report | Low | QCAD 3.0.6 / 3.0.7 autosave crashes | Closed | |
|
Task Description
XP32/ QCAD 3.0.6
The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ...
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll ModVer: 4.7.4.0 Offset: 0005d1e8
|
|
744 | QCAD (main) | Bug Report | Low | QCAD 3.0.5 instable ... | Closed | |
|
Task Description
XP32/ QCAD 3.0.5
The 3.0.5 Version is very instable - crashes many times in an hour
Problem signatur: AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe ModVer: 0.0.0.0 Offset: 00de468d
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
2089 | QCAD (main) | Bug Report | Low | Property Editor: Linetype Scale and Draw Order wrongly ... | Closed | |
|
Task Description
Case:
Drawing unit = inch,
Dimension Label Format set to Engineering or Architectural,
|
|
2073 | QCAD (main) | Bug Report | Low | Property Editor: Imperial Area info incorrect | Closed | |
|
Task Description
Drawing Unit: Inch Label Format: Architectural and Engineering
Note: Info tool calculation is correct.
|
|
1808 | QCAD (main) | Bug Report | Low | Property Editor: Changing width, height, orientation fo ... | Closed | |
|
Task Description
Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
2134 | QCAD (main) | Bug Report | Low | Property Editor, Total Length result incorrect | Closed | |
|
Task Description
Case: Tested with the example drawing provided below: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776
If I select every single entity piece by piece with the mouse pointer the total length is correct. If I select everything in once with a rectangular or a polyline selection the total length is incorrect.
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
1125 | QCAD (main) | Feature Request | Low | Property Editor / Total angle of an arc | Closed | |
1 |
Task Description
Hi,
if I have an arc and use the Property Editor to get the Geometrical information I always miss the total angle of the arc.
Yes - I have the Start and the End angle but to get the Total angle I have to draw construction lines to be able to use the Angular Dim or Info angle tool /or I need to use a pocket calculator ...
It would be nice to have this calculated by QCAD - I assume it can’t be that difficult to design an extra field which will display, based on the start and end angle, the total angle of an arc.
What do you think?
|
|
354 | QCAD (main) | Bug Report | Low | Property Editor / Select Layer Malfunction | Closed | |
|
Task Description
RC1b To change the postfix for dimension. Situation: New drawing, Dimension in Drawing, Dimension on one Layer. Menu > Select > Select Layer and click on a dimension. Went to Property Editor > Geometry > Label and change the Label in <>”. Nothing happens.
The same procedure with a other kind of selection works and it works also in the 2.2.2.0
|
|
2077 | QCAD (main) | Bug Report | Low | Property Editor / Fixed Extension Line fails in certain ... | Closed | |
|
Task Description
If I edit a DIM regarding the fixed Extension Line Length it will fail if it has to be extended to meet the new length. Even it has failed - the Property Editor will provide from now on the new length as the “correct” value for the Extension Line Length.
Example drawing: Try to adjust the Extension Line Length to 50 ...
|
|
1679 | QCAD (main) | Bug Report | Low | Print Preview scale format metric/imperial selection bo ... | Closed | |
|
Task Description
Not sure: Bug or feature request. However - it’s right now confusing
It would be nice if the scale format list would respond to the “Measurement System (for line types and hatch patterns)” setting.
If my setting is Metric:
1:1
1:2
1:5 etc etc
If my settings is imperial:
1”=1”
1”=2”
1”=4” etc etc
|
|
2253 | QCAD (main) | Bug Report | Low | Print Preview incorrect page size | Closed | |
|
Task Description
In Print Preview the movable display of the printing area (white) is displayed to small which makes a multi page arrangement very difficult. You want not notice the wrong size when you print only one page but 10 pages vertical in a row will show the effect clearly. I checked a metric (mm) and an imperial (inch) unit. The deviation in Imperial is clearer than in Metric.
|
|
1475 | QCAD (main) | Bug Report | Low | Print Preview / fit to pages fails ... | Closed | |
|
Task Description
... in dependence to the used Units.
I have notice this behavior a couple times before but wasn’t sure what is the trigger for that. Now I figured out one (I’m sure there are more) scenario which shows the effect:
New drawing, Drawing preferences; Drawing Units: Meter, Meter, Metric,
Printing Page: ISO A4
Print Preview:
Auto fit drawing to page - fails to calculate the scale, Auto fit pages to drawing - fails also ...
Counter test: same drawing - change Paper Unit to mm, Reset Paper size to A4 ...
... and it works flawless
|
|
1715 | QCAD (main) | Bug Report | Low | Print option "Auto fit pages to drawing" broken | Closed | |
|
Task Description
Print option “Auto fit pages to drawing” broken.
|
|
1635 | QCAD (main) | Bug Report | Low | Print current view / Portrait | Closed | |
|
Task Description
Hi,
if I use the “Print current view” tool for a Landscape format - everything works just nicely! If I use it for a Portrait print - the scale is way of.
For this example I used a rectangle as reference. The details what I’m looking for are captured with same sized red rectangles. The Paper orientation was changed before I used the Print command. To have the maximum view I select the rectangle and used “Zoom to selection” - then Print to current view.
Portrait, scale way of: Husky-2017.09.25-03.png
Portrait, manual adjusted - it should look close to this one: Husky-2017.09.25-04.png
I attache for testing the dxf too.
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|