|
1337 | QCAD (main) | Feature Request | Low | Alternate units for dimensions | Assigned | |
2 |
Task Description
Add support for alternate units for dimension style, for example to display units in mm and in.
|
|
1425 | QCAD (main) | Feature Request | Low | Automatically create hatch entities behind border entit... | Assigned | |
1 |
Task Description
Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.
|
|
1430 | QCAD (main) | Feature Request | Low | Modify > Round: one-click fillet | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256
|
|
1445 | QCAD (main) | Bug Report | Low | Switching off grid scaling can break rulers | Assigned | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4314
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1542 | dwg2svg | Feature Request | Low | dwg2svg: add switch to show only given layer(s) | Assigned | |
|
Task Description
Implement a command line switch to only show a list of given layers for dwg2* command line tools.
|
|
1549 | QCAD (main) | Feature Request | Low | Separate Coordinate Display from Drawing Dimensions | Assigned | |
|
Task Description
Source: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752
According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
2 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1594 | QCAD (main) | Feature Request | Low | Tool matrix: allow reordering of tools | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923
|
|
1596 | QCAD (main) | Feature Request | Low | View > Selection Filter: add filter for custom properti... | Assigned | |
3 |
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=4840
|
|
1666 | QCAD (main) | Feature Request | Low | Draw > Line > Relative Angle / Orthogonal: define lengt... | Assigned | |
|
Task Description
Add option to define length (end point) using mouse pointer.
If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1674 | QCAD (main) | Feature Request | Low | Layouts and Viewports: duplicate layout block | Assigned | |
3 |
Task Description
Duplicate layout blocks
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1676 | QCAD (main) | Feature Request | Low | Modify > Explode: explode lines / arcs with line patter... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333
|
|
1700 | dwg2pdf | Feature Request | Low | dwg2pdf: output multiple layouts | Assigned | |
|
Task Description
Add support to specify multiple blocks (layouts) to output (one per page).
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
1 |
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
4 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
1838 | QCAD (main) | Feature Request | Low | Carbide Create import | Assigned | |
|
Task Description
Add support for importing Carbide Create files (.c2d).
Format is JSON based, human readable.
|
|
1841 | QCAD/CAM | Feature Request | Low | QCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ... | Assigned | |
|
Task Description
Add SPx; with x being pen number from 1-8.
TODO: - Which color corresponds to which pen number? - What if there are more than 8 colors in a DXF files?
|
|
1878 | QCAD (main) | Feature Request | Low | Snap > Distances from 2 Points: snap to point with give... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211
|
|
1886 | QCAD (main) | Feature Request | Low | Support advanced tolerance settings for dimensions | Assigned | |
2 |
Task Description
Add support for - tolerance display (dimtol) - upper limit (dimtp) - lower limit (dimtm) - tolerance precision (dimtdec) - tolerance text size factor (dimtfac) - tolerance suppress zeros, etc.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269
|
|
1895 | QCAD (main) | Feature Request | Low | Add support for block transformation matrices | Assigned | |
|
Task Description
Support transformations by transformation matrix for block references.
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1972 | QCAD (main) | Bug Report | Low | Hatch import fails for boundaries with many very small ... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648
|
|
2037 | QCAD (main) | Feature Request | Low | Support alternative angle reference | Assigned | |
|
Task Description
E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.
|
|
2057 | QCAD (main) | Feature Request | Low | Multiline tool | Assigned | |
2 |
Task Description
Implement a multiline tool.
|
|
2130 | QCAD (main) | Task | Low | Text: Text dialog removes tabs | Assigned | |
|
Task Description
Text dialog (QTextEdit) strips tabs in toHtml. If tabs can be retained, text entities could support tabs.
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
2227 | QCAD (main) | Feature Request | Low | CAM > CAM Export: post processor for tangential knife c... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
2299 | QCAD (main) | Feature Request | Low | Add support for multi line attributes | Assigned | |
2 |
Task Description
Multiline attributes can contain linefeeds and formatting like MTEXT.
|
|
2300 | QCAD (main) | Feature Request | Low | Duplicate layout blocks with contents | Assigned | |
2 |
Task Description
Add a tool to duplicate a layout block with contents.
|
|
2457 | QCAD (main) | Bug Report | Low | Polyline start / end widths not saved for first segment | Assigned | |
|
Task Description
Draw a polyline with a single segment
Set the start and end width of the first vertice / segment (index 0)
Save
Reload
|
|
2483 | QCAD (main) | Bug Report | Low | File > Open: MLeaders with text not imported | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10159
|
|
752 | QCAD (main) | Feature Request | Very Low | Add support for the 3dConnexion Space Navigator (Pan an... | Assigned | |
4 |
Task Description
The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.
3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand
While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
259 | QCAD (main) | Feature Request | Medium | Chain dimensions | Closed | |
10 |
Task Description
Chain dimensions
|
|
260 | QCAD (main) | Feature Request | Medium | Reference dimensioning | Closed | |
8 |
Task Description
Reference dimensioning (baseline dimensioning)
Create multiple dimensions using the same base line.
|
|
1297 | QCAD (main) | Feature Request | Low | Add context menu | Closed | |
|
Task Description
Optionally show context menu when right-mouse button is clicked on top of entity.
Originally from FS#1111: “Furthermore, the two named applications show that it’s easily possible to combine dragging (mouse pressed) and context menu (mouse clicked) on the same mouse button. Providing a context menu would increase the usability especially for people used to Windows default applications. I.e. deleting, copying, creating polylines from segments, breaking up blocks/polylines would be functions I’d find useful in a context menu.”
|
|
1537 | QCAD (main) | Feature Request | Low | Draw > Shape: Add option to fill shape (add solid fill) | Closed | |
|
Task Description
Add an option to create a solid fill hatch for shape tools.
|
|
218 | QCAD (main) | Bug Report | Low | Angle dimension shows arrows (no ticks) | Closed | |
|
Task Description
Angle dimension shows always arrows instead of architectural ticks.
|
|
291 | QCAD (main) | Bug Report | Low | Tangent Point - Circle | Closed | |
|
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1642
|
|
1394 | QCAD (main) | Feature Request | Low | Arc length dimension | Closed | |
1 |
Task Description
Support arc length dimenions (undocumented DXF entity ‘ARC_DIMENSION’). Create arc length dimensions with parallel extension lines for angle < 90, orthogonal extension lines otherwise. Display arc symbol beside or on top of label text.
|
|
240 | QCAD (main) | Bug Report | Low | Tool 'Show only active layer' not in layer toolbar | Closed | |
|
Task Description
Tool ‘Show only active layer’ not in layer toolbar.
|